Abstract:Micro-cathode arc thruster offers promising applications in micro–nanosatellite space missions owing to its simple structure, high specific impulse, and low power consumption. However, the non-uniform ablation of the cathode poses a significant limitation on the total impulse of micro-cathode arc thruster. This non-uniformity can be categorized into circumferential and radial types, with previous research primarily focusing on the influence of circumferential ablation non-uniformity. Nevertheless, it has been observed that radial ablation non-uniformity also affects the stability of the thruster, despite the lack of studies in this area. To investigate the mechanism behind the cathode radial ablation, a slice model has been designed to study the motion process of the cathode spots during a single discharge using a high-speed camera. From this analysis aims to identify the root cause of uneven cathode radial ablation. Building upon these findings, a double anode micro-cathode arc thruster has been devised to enhance the uniformity of cathode ablation. Experimental verification has been conducted to assess the performance of the double anode micro-cathode arc thruster. The results indicate that in the traditional micro-cathode arc thruster discharge process, the cathode spots do not migrate towards the outer layer covered by the shell. Instead, they extend to the surface of the shell along the contact area between the shell and cathode. This leads to unequal ablation between the inner and outer layers of the cathode. The double anode micro-cathode arc thruster effectively addresses these issues by providing two discharge channels that maintain the dynamic balance of electrode resistance and increase the ablation amount on the outer layer of the cathode. Consequently, the total impulse of the thruster improved significantly while ensuring the desired performance index.

Probe diagnosis of plume of micro-cathode arc thruster

Investigation of the Physical Process Inside the Crater During the Ablation of the Cathode Material of a Micro-Cathode Arc Thruster

Cathode Position Effects on Microwave Discharge Cusped Field Thruster

Analysis of Ionization Characteristics During Single Discharge of Microcathode Arc Thruster

Diagnostic and Modelling Investigation on the Ion Acceleration and Plasma Throttling Effects in a Dualemitter Hollow Cathode Micro-Thruster

On Cathode Position and Inclination Angle in Magnetically Shielded Hall Thrusters

A Comparative Study on the Different Energy Supply Modes for a Micro-Cathodic Arc Thruster

Experimental Study on the Ionization Regions in a Multi-Cusped Field Thruster

The Effect of Axial Magnetic Field on the Lifetime of Micro Cathode Arc Thruster (μ-CAT)

Preliminary Experimental Characterization Of A Microwave Discharge Cusped Field Thruster

Full lifetime demonstration of a Micro-Cathode-Arc thruster evolution characteristics

Simulation of discharge process of Hall thruster under the internal and external cathode conditions

Radial ablation uniformity of cathode and design of double anode micro-cathode arc thruster

Optimization of Plasma Plume Characteristics Based on Multi-anode Coaxial Ablative Pulsed Plasma Thruster

Recent progress in research on micro-cathode arc thrusters

Design of Magnetically Enhanced Hollow Cathode Micro-Thruster: Concept and Experimental Research

Study on the Structure and Transition of the Hollow Plume in a Multi-Cusped Field Thruster

Study on the influence of change in axial position of cathode on the ignition process of a Hall thruster

Discharge characteristics of two-stage micro-cathode arc MPD thrusters with a permanent magnet and a pulsed magnetic field

Study on Electrons Conduction Paths in Hall Thruster Ignition Processes with the Cathode Located Inside and Outside the Magnetic Separatrix

Analysis of internal material characteristics of cathode crater of micro-cathodic arc thruster