Abstract:Dielectric ceramics are crucial materials in the preparation of high energy storage capacitors, where antiferroelectric ceramics have promising potential due to their large maximum polarization and low remnant polarization. However, their low energy storage density limits their wide application. In this work, core–shell structured ceramics were designed by coating AgNb 0.95 Ta 0.05 O 3 with SiO 2 and sintering in air for 2 h. The microstructure demonstrates that the SiO 2 layer is coated on the ANT nanoparticles, acting as a buffer layer to inhibit grain growth, which results in a significant decrease from 2.74 to 0.61 μm in the grain size of the ceramics during sintering. An increase in SiO 2 content builds up the depletion regions, restricts charge carrier transportation, and reduces the dielectric loss. The insulating SiO 2 buffer layer shares the electric field, thus preventing the premature breakdown of the ANT ceramics and increasing the breakdown field from 200 to 260 kV/cm. Consequently, compared to the 2.05 J/cm 3 energy storage density and 33% efficiency of pure ANT ceramics, ANT@5wt.%SiO 2 ceramics achieve a W rec of 3.52 J/cm 3 and an η of 55%. Also, the ceramic shows significant charge–discharge properties with a fast discharge time of 102.5 ns and a high power density of 142.68 MW/cm 3 . This study indicates that core–shell structural design is one of the effective approaches to enhance the energy storage performance of ceramics.

Design of High Energy-Storage Properties in Eco-Friendly AgNbO3-based Ceramics Via Two-Step Sintering Method and Tuning Phase Boundary

High energy density in Ag0.5Na0.5(Nb1-xTax)O3 antiferroelectric ceramics

High Energy Density in Ag 0.5 Na 0.5 (nb 1-X Ta X )O 3 Antiferroelectric Ceramics

Effects of sintering method on the structural, dielectric and energy storage properties of AgNbO3 lead-free antiferroelectric ceramics

Antiferroelectric stability and energy storage properties of Co-doped AgNbO3 ceramics

Superior energy storage performance realized in antiferroelectric 0.10 wt% MnO2-AgNbO3 ceramics via Bi-doping induced phase engineering

Ultrahigh Energy Storage in (Ag,Sm)(Nb,Ta)O3 Ceramics with a Stable Antiferroelectric Phase, Low Domain-Switching Barriers, and a High Breakdown Strength

High energy storage density in AgNbO3-based lead-free antiferroelectrics using A/B-site co-doping strategy

High energy-storage performance of lead-free AgNbO3 antiferroelectric ceramics fabricated via a facile approach

Enhanced energy storage performance of silver niobate-based antiferroelectric ceramics by two-step sintering mothed

Enhancing energy storage performance of AgNbO3-based ceramics by coating with insulating SiO2 buffer layer

Greatly Enhanced Energy Storage and Discharge Properties in AgNbO3 Ceramics with Stable Antiferroelectric Phase and High Breakdown Strength Using Hydrothermally Synthesized Powders

Improved dielectric energy storage performance of Na0.5Bi0.5TiO3–Sr0.7Nd0.2TiO3 lead-free ceramics by adding an appropriate amount of AgNbO3

High Energy Storage Density and Efficiency with Excellent Temperature and Frequency Stabilities under Low Operating Field Achieved in Ag0.91Sm0.03NbO3-modified Na0.5Bi0.5TiO3-BaTiO3ceramic S

Achieving Ultrahigh Energy Storage Density of La and Ta Codoped AgNbO 3 Ceramics by Optimizing the Field-Induced Phase Transitions

Lead-Free Agnbo3 Anti-Ferroelectric Ceramics With An Enhanced Energy Storage Performance Using Mno2 Modification

Markedly improved energy-storage performance of Na0.5Bi0.5TiO3-based ferroelectric ceramics through introducing Ba(Mg1/3Ta2/3)O3 non-polar phase

Excellent energy storage properties in NaNbO3-based lead-free ceramics by modulating antiferrodistortive of P phase

Enhanced energy storage density in Ca and Ta co‐doped AgNbO 3 antiferroelectric ceramics

The energy storage performance of Sm3+ and Hf4+ co-doped AgNbO3 lead-free antiferroelectric ceramic

Excellent Energy Storage Performance of Nd-Modified Lead-free AgNbO3 Ceramics Via Triple Collaborative Optimization