Abstract:In this study, a graphite felt (GF) electrode material supporting a Cu-based catalyst (CuHDC-400/GF) was pre-pared by a hydrothermal process and subsequent heat treatment. A heterogeneous electro-Fenton (EF) system was built to investigate the degradation of sulfamethoxazole (SMX) by the composite cathode. Scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy were used to char-acterize the physical and chemical properties of the composite cathode. The results show that the composite cathode CuHDC-400/GF has excellent catalytic performance, achieving 100 % removal of SMX (10 mg/L) within 45 min (aeration rate = 0.6 L min(-1), current density = 5 mA cm(-2), initial pH = 5.6). Furthermore, efficient removal of SMX can be achieved over a wide pH range (pH = 3-9). The electrode material can still efficiently degrade SMX after eight cycles. Compared with a heterogeneous EF system, in which the Cu catalyst was directly added to the reaction solution, using CuHDC-400/GF as the cathode realizes the in-situ catalysis of H2O2, leading to reduced catalyst consumption and enhanced electrode stability. The investigation of potential SMX degra-dation pathways and mechanisms revealed that the continuous production of active free radicals is facilitated by the redox cycle between Cu-I and Cu-II on the electrode surface, which can enable SMX degradation. Unlike the Fe-based Fenton reaction, the active superoxide radical O-center dot(2)- was identified as the major contributor to SMX degradation in this system, followed by the hydroxyl radical (OH)-O-center dot. The active sites for SMX degradation were predicted by density functional theory calculations. Combined with the measured mass/charge ratios, the possible degradation paths and intermediates of SMX were predicted. Furthermore, toxicity analysis shows that toxicity significantly declines after degradation. This work is expected to inspire subsequent research on het-erogeneous EF cathode materials with high catalytic performance.

An anode and cathode cooperative oxidation system constructed with Ee-GF as anode and CuFe<sub>2</sub>O<sub>4</sub>/Cu<sub>2</sub>O/Cu@EGF as cathode for the efficient removal of sulfamethoxazole

Catalytic Ceramic Nanofiber Membrane Coupled with Ozonation for Degradation of Sulfamethoxazole: Critical Parameters, Mechanisms and Applicability

Cu/Fe Oxide Integrated on Graphite Felt for Degradation of Sulfamethoxazole in the Heterogeneous Electro-Fenton Process under Near-Neutral Conditions.

Efficient Electrocatalytic Degradation of Sulfamethoxazole with CuAl-LDO/HGF Cathode in a Neutral Heterogeneous Electro-Fenton Process

Cu-doped Fe2O3 Nanoparticles/etched Graphite Felt As Bifunctional Cathode for Efficient Degradation of Sulfamethoxazole in the Heterogeneous Electro-Fenton Process

A Sustainable Electrochemical Strategy Utilizing Pulsed Alternating Current and Dual Carbon Felt Electrodes for Enhanced Degradation of Organic Pollutants: Oxidation Performance and Mechanisms

<i>In-situ</i> cathode induction of HKUST-1-derived polyvalent copper oxides in electro-Fenton systems for effective sulfamethoxazole degradation

An in-situ electrogenerated persulfate and its activation by functionalized sludge biochar for efficient degradation of sulfamethoxazole

Unraveling Degradation Mechanism and Reaction Efficacy of Sulfamethoxazole Via Reactive Oxygen Species Dominated Radical Process

Efficient Sonoelectrochemical Decomposition of Sulfamethoxazole Adopting Common Pt/graphite Electrodes: the Mechanism and Favorable Pathways

In-situ Electrogenerated Persulfate Activated by Co-Existing Cu(II) for Sustainable Removal of Sulfonamides from Environmental Waters

In Situ Etched Graphite Felt Modified with CuFe2O4/Cu2O/Cu Catalyst Derived from CuFe PBA for the Efficient Removal of Sulfamethoxazole Through a Heterogeneous Electro-Fenton Process

Catalytic Degradation of Sulfamethoxazole Through Peroxymonosulfate Activated with Expanded Graphite Loaded CoFe2O4 Particles

CuCe-LDHs Anchored on CNTs-COOH/copper Foam Cathode for the Electrocatalytic Degradation of Sulfamethoxazole under Near-Neutral Conditions

Anodic oxidation of sulfamethoxazole paired to cathodic hydrogen peroxide production

Catalytic Ozonation of Sulfamethoxazole in the Presence of CuO/Al2O3-EPC: Optimization, Degradation Pathways, and Toxicity Evaluation

Pulsed versus direct current electrochemical co-catalytic peroxymonosulfate-based system: Elevated degradation and energy efficiency with enhanced oxidation mechanisms

Fabrication of novel Fe2O3/MXene cathode for heterogeneous electro-Fenton degradation of sulfamethoxazole

Efficient Degradation of Sulfamethoxazole by the CuO@Al2O3 (EPC) Coupled PMS System: Optimization, Degradation Pathways and Toxicity Evaluation

Application of energy sustainable utilization strategy for highly efficient electro-Fenton treatment of antibiotics

Electro-assisted Activation of Peroxymonosulfate in the Presence of Chloride Ion for Degradation of Sulfamethoxazole