Abstract:Calcareous sand has been used as the main filling material in numerous reef constructions. Therefore, understanding its long-term dynamic engineering geological characteristics under cyclic applications of traffic or wave loading is crucial to the design and prediction of the serviceability of reef infrastructures. Considering this, seven monotonic triaxial tests and 33 high-cycle (25,000 cycles) drained triaxial tests were conducted on calcareous sand with various mean effective stresses (p') and cyclic stress ratios (ζ). The results show that the development of the accumulated axial strain (ε1acc) has a strong correlation with the positional relationship between the cyclic stress path and critical strength line (CSL) or static strength envelope (SSE) in the p'-q plane. The critical cyclic stress ratio ζc, that represents the cyclic stress path reaching the CSL, is proposed. When ζ>ζc, the growth rate of ε1acc with ζ increases drastically. Moreover, when the cyclic stress path approaches the SSE, ε1acc enters an incremental collapse state. The increase in p' diminishes the dilatancy of the volumetric strain εv. However, this response of εv reverses from decreasing to increasing with increasing ζ. The resilient modulus (Mr) increases with the number of cycles (N) due to the initial densification. If εv dilation occurs, Mr will decrease with N as particles lose contact. A single parameter for the cyclic stress path ratio (ψ) considering the effects of p', ζ, and SSE is proposed. Additionally, empirical formulas for calculating the ultimate ε1acc and Mr are established. Furthermore, particle degradation significantly worsens ε1acc and εv, but has a more profound effect on the compressibility of εv. This degradation is also detrimental to Mr. A certain deviation trend of the predicted values from the measured values is found to correspond with the relative particle breakage.

Cyclic Failure Mechanisms of Saturated Marine Coral Sand under Various Consolidations

Energy-Based Approach to Quantify Cyclic Resistance and Pore Pressure Generation in Anisotropically Consolidated Sand

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Experimental Investigation of Cyclic Failure Mechanism of Saturated Coral Sand under Various Consolidation Conditions

Liquefaction Characteristics of Saturated Coral Sand Under Anisotropic Consolidations

The monotonic and cyclic shear characteristics of saturated marine coral sand under various anisotropic features

Influences of Cyclic Stress Paths on Deformation Behavior of Saturated Marine Coral Sand: an Experimental Study

Liquefaction characteristics of saturated marine coral sand with different non-plastic fines content subjected to complex cyclic stress paths

Effects of consolidation conditions on the dynamic shear modulus of saturated coral sand over a wide strain range

Experimental Study on Liquefaction Characteristics of Saturated Marine Coral Sand Based on Dissipated Energy Evaluation

Liquefaction Susceptibility of Saturated Coral Sand Subjected to Various Patterns of Principal Stress Rotation

Shear Modulus and Damping Ratio of Saturated Coral Sand under Generalised Cyclic Loadings

An energy-based model for the generation of excess pore water pressure in saturated coral sand

Experimental Investigation of Liquefaction Characteristics of Saturated Coral Sand Subjected to Complex Cyclic Stress Paths: Effects of Loading Frequency

Long-term behaviour and degradation of calcareous sand under cyclic loading

Shear modulus and damping ratio of saturated coral sand under generalized cyclic loadings

Threshold Strain for the Accumulation of Excess Pore-Water Pressure in Saturated Coral Sands under Complex Cyclic Loading Patterns

Prediction model for generation trend of axial deformation of saturated coral sand under cyclic loading

Effects Of Cyclic Loading Directions On Liquefaction Characteristics Of Saturated Coral Sand