Abstract:In this work, the electrochemical performance of four ferrous fluoride cathode materials is investigated based on sulfide all‐solid‐state lithium battery system, among which the anhydrous FeF3‐HT cathode exhibits the optimal performance. As can be seen, the anhydrous FeF3‐HT cathode (red area) is significantly higher than liquid‐electrolyte lithium battery and other solid‐state lithium batteries in terms of cycle performance and capacity. Metal fluoride–lithium batteries with potentially high‐energy densities are regarded as promising candidates for next‐generation low‐cost rechargeable batteries. However, liquid‐electrolyte metal fluoride–lithium batteries suffer from sluggish reaction kinetics, high voltage hysteresis due to side reactions, poor rate capability, and rapid capacity drop during cycling. Moreover, the research on sulfide all‐solid‐state batteries (ASSBs) with metal fluoride cathode is still lacking. Herein, four kinds of iron fluoride materials are applied to the sulfide all‐solid‐state lithium battery system for the first time to investigate the best cathode and corresponding methods. Electrochemical tests showed the cycling performance at different current densities (0.1, 0.3, and 1 C) and rate performance of the four cathodes with the following rules: FeF3‐HT > FeF3‐RT > FeF3·0.33H2O > FeF3·3H2O. The reversible capacities of FeF3‐HT AASB are 519.9 mAh g−1 after 120 cycles at 0.3C and still maintains 340.7 mAh g−1 after 400 cycles even at a high rate of 1 C. In addition, electro impedence spectroscopy and cyclic voltammetry tests of the above four cathodes show that different contents of crystal water, morphologies, and particle sizes have a great influence on the lithium storage mechanism of cathode. Moreover, the reason for the FeF3‐HT cathode's superior specific capacity and rate performance compared with other cathodes at high current densities is revealed, according to cyclic voltammogram tests under different scan rates. The cause is that FeF3‐HT has the highest proportion of the contribution capacity of the cathode surface control process. The above research opens up a new avenue for FeF3‐HT, FeF3‐RT, FeF3·0.33H2O, and FeF3·3H2O cathodes in sulfide ASSBs.

Mn2+doped BaSnF4-based Solid State Electrolyte for Room-Temperature Fluoride Ion Batteries

Ionic Liquid Reinforced NaSICON-type Oxide Electrolyte Films Enabling Solid State Conversion Metal Fluoride-Lithium Batteries

Point Defect Engineering Enabled the High Ionic Conductivity of BaSnF4 for Solid-State Fluoride-Ion Batteries at Room Temperature

Near‐Room‐Temperature Quasi‐Solid‐State F‐Ion Batteries with High Conversion Reversibility Based on Layered Structured Electrolyte

Pressure Tuning and Sn Particle Size Optimization for Enhanced Performance in PbSnF4-Based All-Solid-State Fluoride Ion Batteries

Solvation Engineering of Non-Aqueous Electrolytes for Room-Temperature Fluoride-Ion Batteries

A Fluoride‐Ion‐Conducting Solid Electrolyte with Both High Conductivity and Excellent Electrochemical Stability

Initiating a Room‐Temperature Rechargeable Aqueous Fluoride‐Ion Battery with Long Lifespan through a Rational Buffering Phase Design

Electrolyte Design by Synergistic High‐Donor Solvent and Alcohol Anion Acceptor for Reversible Fluoride Ion Batteries

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Fluoride Ion Storage and Conduction Mechanism in Fluoride Ion Battery Positive Electrode, Ruddlesden-Popper-Type Layered Perovskite La1.2Sr1.8Mn2O7 Crystal

Solvent-in-Salt Electrolytes for Fluoride Ion Batteries

A Na-rich Fluorinated Sulfate Anti-Perovskite with Dual Doping As Solid Electrolyte for Na Metal Solid State Batteries

Alkaline Earth Bismuth Fluorides as Fluoride-Ion Battery Electrolytes

Polymer Electrolyte Based All‐Solid‐State Rechargeable Fluoride Ion Batteries

A Li‐Rich Fluorinated Lithium Zirconium Chloride Solid Electrolyte for 4.8 V‐Class All‐Solid‐State Batteries

High‐Capacity, Long‐Life Iron Fluoride All‐Solid‐State Lithium Battery with Sulfide Solid Electrolyte

First-Principles-Based Optimized Design of Fluoride Electrolytes for Sodium-Ion Batteries

Revealing the Unusual Mechanism of Mixed Cationic and Anionic Redox in Oxyfluorosulfide Cathode for All-Solid-State Fluoride-Ion Batteries

Imidazolium-based ionic liquid electrolytes for fluoride ion batteries

A Zero-Strain Insertion Cathode Material for Room-Temperature Fluoride-Ion Batteries