Crosslinking of Poly(n-Butyl Acrylate)-Poss Copolymers Via Dynamic Urea Exchange Enables Self-Healing, Reprocessing and Shape Recovery

Huaming Wang,Guohua Hang,Honggang Mei,Lei Li,Sixun Zheng

DOI: https://doi.org/10.1039/d2py01414a

IF: 4.6

2023-01-01

Polymer Chemistry

Abstract:In this contribution, we reported a novel approach to crosslink linear poly(n-butyl acrylate)-POSS copolymers via a dynamic urea exchange reaction.

What problem does this paper attempt to address?

Molecular Dynamics Simulations on Self-Healing Behavior of Photo-Polymerization Network

Xiangrui Zheng,Hua Yang,Yaguang Sun,Yongqin Zhang,Yafang Guo

DOI: https://doi.org/10.1088/1361-665x/aad7a1

IF: 4.1

2018-01-01

Smart Materials and Structures

Abstract:Recently, a variety of reversible chemical bonds are incorporated into thermoset polymers to design stimuli-responsive materials. Light-triggered dynamic network is advantageous since it is simple, inexpensive and easy controlled. In this paper, the dynamic photo-responsive network structure with labile bonds and free ethylene dimethacrylate (EGDMA) molecules was constructed. Under the stimulus of UV light, the labile bonds homolytically cleaved and the network was separated into small sections. Then the EGDMA monomers linked these small sections together to form a new network with higher crosslink density. Such depolymerization and polymerization processes would result in the self-healing of materials. Therefore, molecular dynamics method was applied to simulate the interface self-healing process of this polyurethane material under light stimulation condition. The mechanical properties of the healed networks under uniaxial tension were examined. The results showed that self-healing occurs at the interface of materials due to the polymerization, and the mechanical properties of the healed materials are strengthened when compared to that of the fresh samples. Moreover, the effect of crosslinking agent on the self-healing was investigated. The best mechanical properties of healed sample are obtained when the crosslinking agent reacts exactly with the polyurethane network.
Self-healing dynamic bond-based robust polyurethane acrylate hybrid polymers

Xueqi Wu,Maochen Liu,Jiang Zhong,Yuting Zhong,Jinchuang Rong,Fei Gao,Yongluo Qiao,Liang Shen,Haifeng He,Yu-Ting Zhong

DOI: https://doi.org/10.1039/d2nj01439d

IF: 3.3

2022-05-18

New Journal of Chemistry

Abstract:Herein, a self-healing hybrid polyurethane acrylate was prepared by solution polymerization of acrylic monomers (2-hydroxypropylmethacrylate/butyl acrylate mixture) in the presence of performed polyurethane chains containing aliphatic disulfide bonds with terminal isocyanate groups. A good balance between mechanical performance and self-healing capacities was also obtained by precise regulation of the content of disulfide bonds in company with the number of hard segments. The tensile strength of impaired sample was recovered to 94.44% of the original value (22.68 MPa) at under mild condition (95 °C for 24 h). Our prepared samples exhibited an outstanding Young's modulus of 168 MPa compared to the reported self-repaired polyurethanes, in combination with a good toughness. The dynamic evolution of the polymer structure with temperature due to the thermal response of the disulfide bond and the hydrogen bond was also studied by rheological experiments and stress relaxation tests. This self-healable material exhibited a great potential in the industrial field thanks to its excellent mechanical properties and simple preparation process.

chemistry, multidisciplinary
Design of a Self-Healing Cross-Linked Polyurea with Dynamic Cross-Links Based on Disulfide Bonds and Hydrogen Bonding

Ting Li,Zhining Xie,Jun Xu,Yunxuan Weng,Bao-Hua Guo

DOI: https://doi.org/10.1016/j.eurpolymj.2018.08.005

IF: 6

2018-01-01

European Polymer Journal

Abstract:In this work, diamine chain extenders containing disulfide bonds are reacted with triisocyanates to yield dynamic chemical cross-links based on exchangeable disulfide bonds. The polyurea system with dynamic bonding shows drastic decline of storage modulus and very short relaxation times above 150 degrees C so that this polymer exhibits typical dynamic properties, e.g. self-healing, recycling and hysteresis loop recovery. The introduction of disulfide bonds dominates the thermal stimulated dynamic properties, since the control samples without disulfide bonds have longer relaxation times even at high temperatures. Interestingly, presence of disulfide bonds leads to the decline of hydrogen bonding strength which can result in their easier dissociation and subsequently easier topological network rearrangement. In addition, almost complete reversibility of the hydrogen bonding is observed from temperature-dependent Fourier Transform Infrared Spectroscopy, which reveals the important influence of hydrogen bonding on dynamic properties. Thus, Hydrogen bonding dissociation is an indirect reason of dynamic properties, while exchange reaction of disulfide bonds is the primary cause. The results may deepen our understanding of the role of hydrogen bonding in the dynamic materials. In addition, the available commercial raw component, operational feasibility and simplicity constitute a great advantage of the so-prepared dynamic polyurea system, i.e. an effective step to implementation of industrial applications and recycle the nonbiodegradable crosslinked polyureas.
Self-healing polyacrylates based on dynamic disulfide and quadruple hydrogen bonds

Longjin Du,Yuting Zhong,Linying Zhao,Chengzhen Hu,Liang Shen,Yuping Yang,Jiang Zhong

DOI: https://doi.org/10.1039/d4sm00257a

IF: 4.046

2024-04-16

Soft Matter

Abstract:Herein, a self-healing polyacrylate system was successfully prepared by introducing crosslinking agents containing disulfide bonds and monomers capable of forming quadruple hydrogen bonds through free radical copolymerization. This polymer material exhibited good toughness and self-healing properties through chemical and physical dual dynamic networks while maintaining excellent mechanical properties, which expanded the development path of self-healing acrylate materials. Compared to uncrosslinked and single dynamically crosslinked polymers, its elongation at break was as high as 437%, and its tensile strength was 5.48 MPa. Due to the presence of dual reversible dynamic bonds in the copolymer system, good self-healing was also achieved at 60 °C. In addition, differential scanning calorimetry and thermogravimetric analysis measurements confirmed that the thermal stability and glass transition temperature of the material were improved owing to the presence of physical and chemical cross-linking networks.

polymer science,chemistry, physical,materials science, multidisciplinary,physics
The Post-Curing of Waterborne Polyurethane–Acrylate Composite Latex with the Dynamic Disulfide-Bearing Crosslinking Agent

Haotian Zhang,Rihui Liang,Qianshu Wang,Wenbo Luan,Jun Ye,Teng Qiu,Xinlin Tuo

DOI: https://doi.org/10.3390/molecules28248122

IF: 4.6

2023-12-15

Molecules

Abstract:The development of a dynamic network for commodity polymer systems via feasible methods has been explored in the context of a society-wide focus on the environment and sustainability. Herein, we demonstrate an adaptive post-curing method used to build a self-healable network of waterborne polyurethane–acrylate (WPUA) composite latex. The composite latex was synthesized via the miniemulsion polymerization of acrylates in the dispersion of waterborne polyurethane (PU), with commercial acetoacetoxyethyl methacrylate (AAEM) serving as the functional monomer. Then, a dynamic disulfide (S–S)-bearing diamine was applied as the crosslinking agent for the post-curing of the hybrid latex via keto-amine condensation, which occurred during the evaporation of water for film formation. It was revealed that the microphase separation in the hybrid films was suppressed by the post-curing network. The mechanical performance exhibited a high reliability as regards the contents of the crosslinking agents. The reversible exchange of S–S bonds meant that the film displayed associative covalent-adaptive networks in the range of medium temperature in stress relaxation tests, and ≥95% recovery in both the stress and the strain was achieved after the cut-off films were self-healed at 70 °C for 2 h. The rebuilding of the network was also illustrated by the >80% recovery in the elongation at break of the films after three crushing–hot pressing cycles. These findings offer valuable insights, not only endowing the traditional WPUA with self-healing and reprocessing properties, but broadening the field of study of dynamic networks to polymer hybrid latex.

chemistry, multidisciplinary,biochemistry & molecular biology
Reprocessing of cross-linked polyamide networks via catalyst-free methods under moderate conditions

Jinshuai Zhang,Yonghong Zhou,Shuanhong Ma,Feng Zhou

DOI: https://doi.org/10.1039/d3gc03570k

IF: 9.8

2024-02-08

Green Chemistry

Abstract:The development of renewable green synthesis methods for polyamide materials is of great significance in the chemical industry. In this context, we present a synthesis and characterization of a novel type of dynamic covalent polyamide network with exceptional repairability and recyclability. These networks exhibit remarkable dynamics attributed to internal catalysis and steric hindrance, leveraging the dissociation equilibrium between anhydrides and secondary amines containing tert-butyl groups. By investigating the reversibility and reaction mechanism of tert-butylamide-carboxylate bonds (TBCBs) using low-molecular-weight (LMW) model compounds, we establish a foundation for the rational design and optimization of TBCB-based cross-linked polyamide covalent adaptable networks. We successfully synthesize robust tung oil (TO)-based ultraviolet (UV)-curable polyamide polymers, showcasing encouraging reparability and reprocessability. The dynamic nature of the UV-curable polyamide networks is thoroughly examined through rheological analysis, stress relaxation, and temperature-dependent Fourier transform infrared (FT-IR) studies, confidently confirming their dynamic characteristics. Scratch-repairing, hot-pressing, and extrusion experiments further demonstrate the materials' exceptional repair and reprocessing capabilities. This research represents a significant advancement in sustainable polymer development by combining high mechanical properties with easy repair and recycling.

chemistry, multidisciplinary,green & sustainable science & technology
Solvent-free Thermo-Reversible and Self-Healable Crosslinked Polyurethane with Dynamic Covalent Networks Based on Phenol-Carbamate Bonds

Jiaxin Shi,Tianze Zheng,Baohua Guo,Jun Xu

DOI: https://doi.org/10.1016/j.polymer.2019.121788

IF: 4.6

2019-01-01

Polymer

Abstract:Polyurethanes with dynamic covalent networks have the potential of self-healing, reprocessing and recycling, however, how to improve the efficiency of self-healing and reprocessing, and reduce the use of solvent and costs, are still problems to solve. In this work, we synthesized a cross-linked polyurethane containing dynamic phenolcarbamate bonds from low-cost raw materials without use of solvent. The dynamic polyurethane possesses excellent self-healing and reprocessing properties, which exhibits low relaxation activation energy (92.7 kJ/mol) and can be almost completely healed at 80 degrees C for 2 h. After remolded for 4 times, the material shows almost lithe change in mechanical properties. Further studies on the phenol-carbamate bonds give the quantitative reaction equilibrium constants, thermodynamic parameters and dissociation activation energy. In viewpoint of the dynamic properties and easy synthesis of phenol-carbamates, various types of cross-linked polymers containing such dynamic bonds can be further tailor designed.
Self-healing hyperbranched poly(aroyltriazole)s

Qiang Wei,Jian Wang,Xiaoyuan Shen,Xiao A. Zhang,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1038/srep01093

IF: 4.6

2013-01-01

Scientific Reports

Abstract:The research on self-healing polymers has been a hot topic. The encapsulated-monomer/catalyst, supramolecular self-assembly and reversible or dynamic covalent bond formation are the prevailingly adopted strategies. The alternative of irreversible covalent bond formation is, however, to be further developed. In this contribution, self-healing hyperbranched poly(aroyltriazole)s of PI and PII sharing such mechanism were developed. The polymers were synthesized by our developed metal-free click polymerizations of bis(aroylacetylene)s and triazide. They are processible and have excellent film-forming ability. High quality homogeneous films and sticks free from defects could be obtained by casting. The scratched films could be self-repaired upon general heating. The cut films and sticks could be healed by stacking or pressing the halves together at elevated temperature. Thus, these hyperbranched polymers could find broad applications in diverse areas and our design concept for self-healing materials should be generally applicable to other hyperbranched polymers with reactive groups on their peripheries.
Recyclable Self-Healing Polyurethane Cross-Linked by Alkyl Diselenide with Enhanced Mechanical Properties

Yuqing Qian,Xiaowei An,Xiaofei Huang,Xiangqiang Pan,Jian Zhu,Xiulin Zhu

DOI: https://doi.org/10.3390/polym11050773

IF: 5

2019-05-01

Polymers

Abstract:Dynamic structures containing polymers can behave as thermosets at room temperature while maintaining good mechanical properties, showing good reprocessability, repairability, and recyclability. In this work, alkyl diselenide is effectively used as a dynamic cross-linker for the design of self-healing poly(urea–urethane) elastomers, which show quantitative healing efficiency at room temperature, without the need for any catalysts or external interventions. Due to the combined action of the urea bond and amide bond, the material has better mechanical properties. We also compared the self-healing effect of alkyl diselenide-based polyurethanes and alkyl disulfide-based polyurethanes. The alkyl diselenide has been incorporated into polyurethane networks using a para-substituted amine diphenyl alkyl diselenide. The resulting materials not only exhibit faster self-healing properties than the corresponding disulfide-based materials, but also show the ability to be processed at temperatures as low as 60 °C.

polymer science
Self-healable and Reprocessable Networks Involving Diblock Copolymer and Hindered Urea Bonds

Bingjie Zhao,Lei Li,Jiawei Hu,Huaming Wang,Honggang Mei,Sixun Zheng

DOI: https://doi.org/10.1016/j.polymer.2022.124591

IF: 4.6

2022-01-01

Polymer

Abstract:In this contribution, we reported a novel design of the self-healable (and/or reprocessable) networks involving diblock copolymers and hindered urea bonds (HUBs). The diblock copolymers were crosslinked with a crosslinker bearing hindered urea bonds (HUBs). Toward this end, a novel crosslinker (denoted HUDA) was synthesized via the reaction of 2-isocyanatoethylacrylate with N,N′-di-tert-butylethylenediamine, a hindered diamine. The diblock copolymers were composed of polystyrene (PS) and poly(n-butyl acrylate-stat-HUDA) [denoted P(BA-stat-HUDA)] blocks, which were synthesized via a two-step sequential reversible addition-fragmentation chain transfer (RAFT) polymerization approach. In the P(BA-stat-HUDA) blocks, HUDA acted as not only one of the copolymerization monomers but also the crosslinker bearing HUBs. In the networks, the PS microdomains behaved as the nanoreinforcement of P(BA-stat-HUDA) matrix. It was found that the PS-b-P(BA-stat-HUDA) networks displayed the self-healing properties or/and reprocessing properties. The self-healing properties were quite dependent on the concentration of hindered urea bonds. The self-healing behavior is attributable to the intense metathesis of HUBs in the crosslinked networks.
Intrinsically self-healing, reprocessable and recyclable epoxy thermosets based on dynamic reversible urea bonds

Bifang Chen,Xiaohong Liu,Jiaming Liu,Zhiqiang Feng,Xiaole Zheng,Xiankun Wu,Chaolong Yang,Liyan Liang

DOI: https://doi.org/10.1016/j.reactfunctpolym.2022.105184

IF: 4.966

2022-03-01

Reactive and Functional Polymers

Abstract:Developing self-healable, recyclable and reprocessable polymer materials is one of the effective ways to relieve plastic pollution and save resources. Using dynamic reversible hindered urea bonds (HUBs) to construct self-healing materials have become a hot topic to investigate renewable materials. HUBs have a large substituent on its nitrogen atom, which can be dynamically dissociated into related amines and isocyanates without the need for catalysts. Here, integrating HUBs into the epoxy cross-linking network would obtain dynamic covalent self-healing epoxy resin based on large hindered urea bonds (HUBs-EP), which could endow the crosslinked networks with fast reconfigurability under relatively low temperature. In this work, HUBs-EP has optional recyclability (In N, N-dimethylformamide and tetrahydrofuran), good reprocessability (under simple hot-pressing procedure) and rapid self-healing property under 110 °C within 10 min all due to reversible dissociation and recombination of dynamic covalent urea bonds. The extremely simple manufacturing method of dynamically reversible polymers obtained by integrating dynamic covalent bonds into thermoset will give a major hint for the development of sustainable materials.

engineering, chemical,chemistry, applied,polymer science
Double-crosslinked network design for self-healing, highly stretchable and resilient polymer hydrogels

yinlei lin,deliu he,zhifeng chen,liying wang,guangji l i

DOI: https://doi.org/10.1039/c5ra26770f

IF: 4.036

2016-01-01

RSC Advances

Abstract:Hydrophobic stearyl methacrylate (C18) was captured into sodium dodecyl sulfate (SDS) micelles and self-assembled nanoparticles of an amphiphilic polyurethane macromonomer PU-HEMA were prepared, and they were used as a physical crosslinker and a multifunctional covalent crosslinker, respectively. A reaction system containing acrylamide (AM), the C18 in the micelles and the self-assembled PU-HEMA nanoparticles was designed for constructing chemically and physically double-crosslinked network (CPDN) hydrogels. The prepared CPDN hydrogels have a tensile elongation at break of at least 1400% and can rapidly and fully recover their original shapes in compression experiments, exhibiting superior stretchability and resilience. In addition, the CPDN hydrogels possess a remarkable self-healing behavior and strong self-healing ability even at ambient temperature without the need for any stimulus or healing agent. The novel strategy developed in this study to construct highly stretchable, resilient and self-healing polymer hydrogels is simple yet extremely versatile, thereby opening up a new avenue for the construction of desired functional CPDN hydrogels with excellent mechanical properties.
Self-healing amino acid-bearing acrylamides/ n -butyl acrylate copolymers via multiple noncovalent bonds

Ryo Kudo,Sadaki Samitsu,Hideharu Mori

DOI: https://doi.org/10.1039/d4ra00800f

IF: 4.036

2024-01-01

RSC Advances

Abstract:Four amino acid-bearing acrylamides, N -acryloyl- l -threonine, N -acryloyl- l -glutamic acid, N -acryloyl- l -phenylalanine, and N -acryloyl- l , l -diphenylalanine, were copolymerized with n -butyl acrylate to develop amino acid-based self-healable copolymers.

chemistry, multidisciplinary
Dynamic reversible bonds enable external stress-free two-way shape memory effect of a polymer network and the interrelated intrinsic self-healability of wider crack and recyclability

Xudong Chen,M. Zhang,M. Rong,L. Fan

DOI: https://doi.org/10.1039/C8TA05751F

2018-08-21

Abstract:In this paper, we propose a new method to prepare an external stress free two-way shape memory polymer. The core advance lies in the introduction of alkoxyamine moieties into the main chains of crystalline polycaprolactone (PCL) based crosslinked polyurethanes (PUs). By using the synchronous bond fission/radical recombination habit of C–ON bonds in alkoxyamine in a controlled manner, the stretched PU network undergoes uneven partial stress relaxation depending on the triggering status of C–ON bonds in the specific sites. Accordingly, the greatly relaxed portions tend to maintain the extended status, while the nearly unrelaxed portions tend to recover to their original undeformed shape. These two opposite tendencies successfully create an internal tensional force, which cooperates with the bidirectional deformation induced by melting/recrystallization of the crystalline phase and leads to two-way shape memory effect. Additionally, the dynamic reversibility of C–ON bonds further enables interrelated reprogramming, intrinsic self-healing of wider crack and recycling of the crosslinked PU. Such a diversity of smart stimuli-responsive properties is not available in the case of irreversible polymers.

Materials Science
Fast (re)processing of Urea-Containing Polymers Enabled by Dynamic Aminoketoenamide Bonds

Youwei Ma,Josei Augusto Berrocal,Xuesong Jiang,Zixing Shi

DOI: https://doi.org/10.1021/acssuschemeng.3c01388

IF: 8.4

2023-01-01

ACS Sustainable Chemistry & Engineering

Abstract:This work presents a straightforward strategy to introducedynamiccovalent aminoketoenamide (AKE) onto the backbone ofpolyurea-based polymers. Bis-vinylogous amides were synthesized fromdiamines and acetylacetone and used as drop-in agents during the polymerizationof compounds featuring amine, hydroxyl, and isocyanate reactive groups.This chemistry leads to AKE-containing poly-(urea urethane)-s(PUUs) that are thermally healable and reprocessabledue to the dissociation of AKE at elevated temperatures.The obtained PUUs displayed faster stress relaxationrates and lower activation energies upon increasing the AKE content, which favored fast processing. Moreover, the ability toact as a hydrogen-bonding acceptor of the two carbonyl groups of the AKE moiety allowed us to toughen the PUUs. Giventhe facile synthesis of AKE, this method opens a promisingroute toward recycling and toughening urea-containing polymers onlarge scales. Transformation of conventionalpolyureas into dynamic aminoketoenamide-containingpolymers with healability, reprocessability, and tunable stress relaxationrates enabled by acetylacetone chemistry.
Dynamic Urea Bond for the Design of Reversible and Self-Healing Polymers

Hanze Ying,Yanfeng Zhang,Jianjun Cheng

DOI: https://doi.org/10.1038/ncomms4218

IF: 16.6

2014-01-01

Nature Communications

Abstract:Polymers bearing dynamic covalent bonds may exhibit dynamic properties, such as self-healing, shape memory and environmental adaptation. However, most dynamic covalent chemistries developed so far require either catalyst or change of environmental conditions to facilitate bond reversion and dynamic property change in bulk materials. Here we report the rational design of hindered urea bonds (urea with bulky substituent attached to its nitrogen) and the use of them to make polyureas and poly(urethane-urea)s capable of catalyst-free dynamic property change and autonomous repairing at low temperature. Given the simplicity of the hindered urea bond chemistry (reaction of a bulky amine with an isocyanate), incorporation of the catalyst-free dynamic covalent urea bonds to conventional polyurea or urea-containing polymers that typically have stable bulk properties may further broaden the scope of applications of these widely used materials.
Diels-Alder-Based Crosslinked Self-Healing Polyurethane/Urea from Polymeric Methylene Diphenyl Diisocyanate

Pengfei Du,Meiyin Wu,Xuanxuan Liu,Zhen Zheng,Xinling Wang,Thomas Joncheray,Yuefan Zhang

DOI: https://doi.org/10.1002/app.40234

IF: 3

2013-01-01

Journal of Applied Polymer Science

Abstract:ABSTRACTCrosslinked self‐healing polyurethane/urea based on a Diels–Alder reaction (C‐PMPU–DA) was synthesized from a multiple‐furan monomer and a commercial bismaleimide. The multiple‐furan monomer (PMPU–furan) was obtained from a functionalized prepolymer (polymeric MDI: PBA‐2000 = 2:1) by furfuryl amine. The structures of both the PMPU–furan and C‐PMPU–DA were characterized by attenuated total reflectance (ATR)–Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and 1H‐NMR. The Diels–Alder bonds enabled C‐PMPU–DA thermal reversibility, which was investigated by ATR–FTIR spectroscopy, 1H‐NMR, gel–solution–gel experiments, and viscosity tests. Meanwhile, the self‐healing properties of C‐PMPU–DA were also investigated by the recovery of the mechanical properties. The results showed that C‐PMPU–DA exhibited good thermal reversibility and self‐healing properties. C‐PMPU–DA exhibited thermosetting properties at room temperature, although it exhibited thermoplastic properties at higher temperatures and may find applications in self‐healing materials, recyclable materials, or removable materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40234.
High-Performance Cross-Linked Self-Healing Material Based on Multiple Dynamic Bonds

Min Xu,Bo Cheng,Yeming Sheng,Jiahui Zhou,Minhui Wang,Xiaolin Jiang,Xun Lu

DOI: https://doi.org/10.1021/acsapm.0c00154

2020-01-01

ACS Applied Polymer Materials

Abstract:There is a trade-off between mechanical and self-healing performance for cross-linked self-healing materials. Herein, we design a polyurethane material containing triple synergy dynamic bonds to address the dilemma. The as-prepared polyurethane exhibits a maximum stress of 27.3 MPa and excellent self-healing performance. Specifically, boric acid is used as a cross-linker and the network cross-linked with boronic ester bonds under alkaline conditions is highly beneficial in terms of mechanical properties. Meanwhile, disulfide bonds and reversible boronic ester bonds located at the cross-linked point and main chain are successively broken upon being damaged, which is conducive to better fluidity of chains and endows the material with superior healing efficiency and multiple cycles of healing. Consequently, the high-performance self-healing material is of great potential in the fields of high-performance coating, aerospace, and load-bearing rubber.
Self-healing polymers with PEG oligomer side chains based on multiple H-bonding and adhesion properties

dandan zhu,qiang ye,xuemin lu,qinghua lu

DOI: https://doi.org/10.1039/c5py00621j

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:In an attempt to prepare polymers able to function as self-healing materials, a quadruple hydrogen-bonding ureidopyrimidinone (UPy) moiety was introduced to polymer systems. Low crosslinking materials based on hydroxyethyl acrylate (HEA) and poly(ethylene glycol) methacrylate (PEGMA) containing 10% of UPy moieties were synthesized, and their thermal and rheological properties were investigated by dynamic mechanical analysis (DMA) and a rotational rheometer. The hydroxyethyl group and a PEG oligomer with high molecular polarity as side chains provided high surface energies and adhesion properties. The fastest self-healing of these polymer films can be achieved within 20 min. The adhesion strength tests via the tensile mode revealed the potential of these self-healing polymers in application as adhesives.
Room temperature self-healing crosslinked elastomer constructed by dynamic urea bond and hydrogen bond

Zhongqun Zhou,Shenye Chen,Xinmeng Xu,Yang Chen,Lanpin Xu,Yanning Zeng,Faai Zhang

DOI: https://doi.org/10.1016/j.porgcoat.2021.106213

IF: 6.6

2021-05-01

Progress in Organic Coatings

Abstract:<p>Designing a crosslinked polymer with autonomous self-healing at room temperature (RT) remains an arduous challenge because the topological network reconstructions are governed by crosslinking. Herein, a flexible strategy is described to develop intrinsically dynamic crosslinked elastomers with RT self-healing via a photo-initiated copolymerization to address these issues. The key is to incorporate a urea–urethane structure with dynamic urea bond into the polymer network as a flexible crosslinking unit. This strategy endows the crosslinked elastomer with superior properties, including autonomously rapid self-healing at RT, extreme stretchability of up to 1726%, high toughness (∼24.45 MJ m<sup>–3</sup>), extended stability, and recyclability. Upon damaged, the resultant elastomers instantly self-heal at RT and completely self-heal within 10 min without the assistance of external triggers. These amazing properties of the dynamic elastomer are attributed to the synergistic effect of the robustly dynamic urea bonds and inter- and intrachain hydrogen bond interactions. Notably, the self-healing and mechanical properties of the network can be optimized by tuning the dynamic crosslinker content. Dynamic reversibility occurs at RT evidenced by rheological tests. The facile fabrication method and multifunctional properties of the self-healable and stretchable crosslinked elastomer demonstrate that it shows great potential in smart protective coating and wearable electronics industry.</p>

materials science, coatings & films,chemistry, applied

Crosslinking of Poly(n-Butyl Acrylate)-Poss Copolymers Via Dynamic Urea Exchange Enables Self-Healing, Reprocessing and Shape Recovery

Molecular Dynamics Simulations on Self-Healing Behavior of Photo-Polymerization Network

Self-healing dynamic bond-based robust polyurethane acrylate hybrid polymers

Design of a Self-Healing Cross-Linked Polyurea with Dynamic Cross-Links Based on Disulfide Bonds and Hydrogen Bonding

Self-healing polyacrylates based on dynamic disulfide and quadruple hydrogen bonds

The Post-Curing of Waterborne Polyurethane–Acrylate Composite Latex with the Dynamic Disulfide-Bearing Crosslinking Agent

Reprocessing of cross-linked polyamide networks via catalyst-free methods under moderate conditions

Solvent-free Thermo-Reversible and Self-Healable Crosslinked Polyurethane with Dynamic Covalent Networks Based on Phenol-Carbamate Bonds

Self-healing hyperbranched poly(aroyltriazole)s

Recyclable Self-Healing Polyurethane Cross-Linked by Alkyl Diselenide with Enhanced Mechanical Properties

Self-healable and Reprocessable Networks Involving Diblock Copolymer and Hindered Urea Bonds

Intrinsically self-healing, reprocessable and recyclable epoxy thermosets based on dynamic reversible urea bonds

Double-crosslinked network design for self-healing, highly stretchable and resilient polymer hydrogels

Self-healing amino acid-bearing acrylamides/ n -butyl acrylate copolymers via multiple noncovalent bonds

Dynamic reversible bonds enable external stress-free two-way shape memory effect of a polymer network and the interrelated intrinsic self-healability of wider crack and recyclability

Fast (re)processing of Urea-Containing Polymers Enabled by Dynamic Aminoketoenamide Bonds

Dynamic Urea Bond for the Design of Reversible and Self-Healing Polymers

Diels-Alder-Based Crosslinked Self-Healing Polyurethane/Urea from Polymeric Methylene Diphenyl Diisocyanate

High-Performance Cross-Linked Self-Healing Material Based on Multiple Dynamic Bonds

Self-healing polymers with PEG oligomer side chains based on multiple H-bonding and adhesion properties

Room temperature self-healing crosslinked elastomer constructed by dynamic urea bond and hydrogen bond