Abstract:On-chip optical resonators have proven to be a promising platform for generating Kerr frequency combs. Whispering gallery mode resonators are particularly attractive because of their small footprint as well as low threshold and power consumption. This performance can be attributed to two characteristics: the cavity quality factor (Q) and the cavity dispersion. The input optical field into the cavity is amplified by the cavity Q, enabling nonlinear processes to occur with low input powers. In addition, the total span of the optical comb is governed by the dispersion. In an optical cavity-based comb, the dispersion is governed by the geometric dispersion of the cavity and the material dispersion. While many different materials have been explored, the realization of ultrahigh Q (UHQ) on-chip frequency comb sources is still challenging for most materials. One exception is the family of integrated silica devices. However, because the silica attracts water molecules from the ambient environment, the lifetime of the device performance is fundamentally limited, unless packaged in a controlled atmosphere. Here, we demonstrate the generation of environmentally stable frequency combs fabricated from SiO1.7N0.13 microtoroidal resonators. Due to the UHQ factors of the cavities, parametric oscillations with submicrowatt thresholds are demonstrated. Based on their geometry and material properties, the cavities have normal dispersion. However, due to avoided mode crossing, frequency combs are generated. Finally, unlike SiO2, SiO1.7N0.13 inhibits the formation of a water monolayer, allowing submicrowatt performance to be maintained for over a week in devices stored with minimal environmental controls.

Silicon Nitride-Based Kerr Frequency Combs and Applications in Metrology

High-Q Si3N4 microresonators based on a subtractive processing for Kerr nonlinear optics

Monolithic photonic circuits for Kerr frequency comb generation, filtering and modulation

Monolithic lithium niobate photonic circuits for Kerr frequency comb generation and modulation

Kerr Combs from Normal and Anomalous Dispersion Silicon Nitride Microresonators

Emerging material systems for integrated optical Kerr frequency combs

Hybrid Kerr-electro-optic frequency combs on thin-film lithium niobate

Universal formation dynamics and noise of Kerr-frequency combs in microresonators

Fabrication of Silicon Nitride-Based Integrated Microcavity Optical Frequency Comb Devices

Investigation of mode coupling in normal-dispersion silicon nitride microresonators for Kerr frequency comb generation

III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing

Thermal tuning of Kerr frequency combs in silicon nitride microring resonators

Adjustable Repetition Rate Kerr Frequency Combs in an Integrated Silica Microring

Universal Dynamics of Kerr Frequency Comb Formation in Microresonators

Performance evaluation of silicon-chip-based mid-infrared Kerr optical frequency combs with ridge cross section

Stretching the Spectra of Kerr Frequency Combs with Self-Adaptive Boundary Silicon Waveguides

Normal dispersion silicon oxynitride microresonator Kerr frequency combs

Advances in III-nitride-based Microresonator Optical Frequency Combs

Analysis of Kerr comb generation in silicon microresonators under the influence of two-photon absorption and free-carrier absorption

Theoretical analysis of a mid-infrared Kerr frequency comb in a graphene-on-silicon micro-resonator

Tuning Kerr-Soliton Frequency Combs to Atomic Resonances