Abstract:Abstract Metal-dielectric-metal (MIM) waveguide coupling systems based on surface plasmon polaritons (SPPs) are designed and studied. The finite element method is used to simulate the transmission spectra of structures in the whole simulation process. One waveguide coupling system consists of an inverted T-shaped cavity with defect (ITD) and a waveguide with a metal wall. The filter band appears in the transmission spectrum due to the opposite direction of two Fano resonances. The filter band width and the filtering range can be tuned effectively by changing the structure parameters. In this system, the center frequency and bandwidth of the filter band are 1330 nm and 114 nm, respectively. The insertion loss and reflection loss are −1.41 dB and −16.89 dB, respectively. The optimization is carried out on the basis of the first system in order to improve the filtering performance. Optimized waveguide coupling system contains an ITD and a waveguide with a slot cavity. Electromagnetically induced transparency (EIT) and Fano resonance exist simultaneously, and the filter band is induced in the transmission spectrum. In this system, the center frequency and bandwidth of the filter band are 1412 nm and 120 nm, respectively. The insertion loss and reflection loss are −0.50 dB and −37.32 dB, respectively. EIT and Fano resonance can not only be regulated independently, but also be regulated simultaneously by changing the structural parameters. And the intensity of EIT and the width of the filter band can be manipulated with changes of the structural parameters. The transmission response of SPPs propagating in the structure can be adjusted dynamically. Moreover, these novel SPPs optical waveguide structures have good filtering efficiency and can meet different filtering needs. These results show that the proposed systems are promising for filter, slow light device and photonic device integration applications.

Novel Specular-Reflection Bandpass Filter Based on Composite Metagratings

Narrow band filters in both transmission and reflection with metal/dielectric thin films

Design and simulation of omnidirectional reflective color filters based on metal-dielectric-metal structure.

All-Dielectric Metasurface for Highly Tunable, Narrowband Notch Filtering

Versatile Optical Beam Routers Based on Inversely Designed Supercell Metagratings

Non-polarized and Ultra-Narrow Band Filter in MIR Based on Multilayer Metasurface

Broadband Achromatic Polarization Insensitive Metalens Design in the Near-Infrared Spectrum

Transmission Characteristics of A Plasmonic Bragg Reflector Based on A Metal-Embedded Slot Structure

Broadband Binary-Reflection-phase Metasurfaces with Undistorted Transmission Wavefront Via Mirror Symmetry

Broadband Mid-Infrared Antireflection Metasurfaces Based on Silicon

Flexible Metamaterial Narrow-Band-pass Filter Based on Magnetic Resonance Coupling Between Ultra-Thin Bilayer Frequency Selective Surfaces

Broadband, High‐Efficiency and Wide‐Incident‐Angle Anomalous Reflection in Groove Metagratings

Broad Band Optical Band-Reject Filters in Near-Infrared Regime Utilizing Bilayer Ag Metasurface

Band-stop filter based on tunable Fano resonance and electromagnetically induced transparency in metal-dielectric-metal waveguide coupling systems

Bidirectional Angle-Tolerant Polarization-Tuned Filtering and Wide-Range Refractive Index Sensing Based on Metal Film Coated Nanograting

Fully analytical design of electromagnetic transmissive metagratings for highly efficient extreme-angle beam refraction and reflection

Research on broadband microwave electromagnetic antireflection effect based on angle-insensitive electromagnetically induced transparent metamaterials

Design Of Metamaterial Based-On Ferromagnetic Substrate

Bifunctional Microwave Metagrating Used As Reflectarray for Diffraction Pattern Manipulation

Invited Article: Narrowband terahertz bandpass filters employing stacked bilayer metasurface antireflection structures

Narrowband and high-transmissivity guided-mode resonance filter in the visible range