Abstract:Developing microstructurally stable alloys with the outstanding strength-ductility combination at both room temperature and elevated temperatures is highly desirable for advanced structural applications, which, however, still remains challenging despite years of efforts. In this study, leveraging on the computation-aided thermodynamic modeling, novel high-strength Ni39.9Co20Fe30-xCrxAl6Ti4B0.1 (x = 0, 10, 15, and 20 at.%) high-entropy alloys (HEAs) were rationally designed, which maintained a stable coherent precipitation microstructure when continually substitute Fe with Cr. The structural features, mechanical properties, and underlying deformation micro-mechanisms were systematically investigated. We found that Cr mostly partitions into the face-centered-cubic (FCC) matrix relative to the L1(2)-type nanoparticles. The increased Cr concentration substantially decreases the stacking fault energy (SFE) of the matrix and results in the stacking-fault-prevailed deformation behaviors, thereby producing simultaneously enhanced strength and ductility at room temperature. By contrast, when tested at 600 degrees C, the Cr-free HEA suffers from an extremely brittle fracture along grain boundaries caused by environmental oxidation damages. Interestingly, with Cr doping up to 20 at.%, such a serve intergranular embrittlement can be completely eliminated due to the increased oxidation resistance, leading to a distinct brittle-to-ductile transition (from 3.4 to 25.2%) at a high strength level of similar to 1136 MPa. These findings will give new in-sights into the controllable design of novel high-performance HEAs for achieving target microstructures and superior property combinations. (c) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Optimizing the Microstructure and Mechanical Performance of Fe-Ni-Cr-Al High Entropy Alloys Via Ti Addition

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Microstructural optimization of Fe x CrNiAl 0.5 Ti 0.5 high entropy alloys toward high ductility

Microstructural evolution and mechanical behavior of Co‐free (Fe40Ni30Cr20Al10)100‐x Ti x high‐entropy alloys

Microstructures and Mechanical Properties of AlCrFeNiMo 0.5 Ti X High Entropy Alloys

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Effect of TiC addition on the microstructure and mechanical properties of FeCoCrNiMn high entropy alloy fabricated by selective laser melting

Designing Nanoparticles-Strengthened High-Entropy Alloys with Simultaneously Enhanced Strength-Ductility Synergy at Both Room and Elevated Temperatures

Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy

Effects of Ti addition and annealing on microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy

Effects of Cr/Fe Ratio on Structural Evolution and Tensile Properties of the Fe75.7−xCrxNi15.1Al4.6Ti4.6 High‐Entropy Alloys

Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

Influence of Al and Ti Alloying and Annealing on the Microstructure and Compressive Properties of Cr-Fe-Ni Multi-Principal Element Alloy

Effects of Ti Content on the Microstructure and Mechanical Properties of Al0.2CoCrFeNi2Tix High-Entropy Alloys

Study on the Microstructure and Mechanical Properties of Non-Equimolar NiCoFeAlTi High Entropy Alloy Doped with Trace Elements

Microstructure and tensile properties of Co-free Fe4CrNi(AlTi) high-entropy alloys

Effect of Ti Addition on Microstructure Evolution and Mechanical Properties of Al 18 Co 13 Cr 10 Fe 14 Ni 45 Eutectic High-Entropy Alloys

Effects of Ti-to-Al Ratios on the Phases, Microstructures, Mechanical Properties, and Corrosion Resistance of Al2-xCoCrFeNiTix High-Entropy Alloys

Evolution of microstructure and mechanical characteristics of (CrFeNiCu)100–xTix high-entropy alloys