Abstract:Metal organic frameworks (MOFs) have unique advantages in optimizing the ionic conductivity of battery separators because of their rich cavity structure and highly ordered and connected pores. In this study, we used a hydrothermal method to synthesize a functional material, Ag-MOF crystal, as a separator coating content, and then studied the properties and application effect of the MOF-Al2O3-blended coating applying to a polyethylene (PE) separator (MOFxAl1–x/PE). Results show that MOF0.08Al0.92/PE (MOF/Al2O3 = 0.08:0.92) used in NCM811||Li cells significantly not only improves the fast charge–discharge performance of the cells but also inhibits the growth of lithium dendrites during long-term charge–discharge cycling; the Li+ transference number (tLi+) of the MOF0.08Al0.92/PE composite separator is 0.61; the Li||separator||Li half-cell circulates stably for 1000 h at varying current density from 0.5 to 10 mA cm–2 and only produces low overpotentials, indicating that MOF0.08Al0.92 stabilizes lithium. The initial capacity of the NCM811||Li cell using the MOF0.08Al0.92/PE separator is 165.0 mA h g–1, its capacity retention is 70.67% after 300 cycles at 5 C, and the interface resistance of the cells only increases from 13.8 to 31.5 Ω, whereas the capacity retention of Al2O3/PE separator batteries is only 40.41% (62.2 mA h g–1) under the same conditions. During the charge–discharge cycling, the MOF-Al2O3 coating induces the lithium anode to quickly form a stable and dense solid–electrolyte interphase layer, promotes the uniform deposition of Li+, and inhibits the growth of lithium dendrites as well.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00390.Crystal data and structure refinement for Ag-MOF; XRD patterns of the Ag-MOF; SEM image of the MOF0.08Al0.92 coating layer; elemental mapping of Al, O, Ag, C, and N; TGA curves; DCS curves; stress–strain curves; Nyquist plots; LSV curves of PE, Al2O3/PE, MOF0.05Al0.95/PE, and MOF0.08Al0.92/PE separators; EDS mapping; charge and discharge profiles of MOF0.08Al0.92/PE separator cells at 0.2 C; electrochemical performance of Li||PE||Li and Li||MOF0.08Al0.92/PE||Li symmetrical cells; long-term cycle stability at 1.0 mA cm–2; and XPS of Li anodes recovered from galvanostatic Li plating/stripping of the Li|| Al2O3/PE||Li cell after 100 cycles at 1 mA cm–2 (PDF)This article has not yet been cited by other publications.

Chromium-based Metal-Organic Framework Coated Separator for Improving Electrochemical Performance and Safety of Lithium-Ion Battery

Tailoring the Function of Battery Separators Via the Design of MOF Coatings

Covalent Organic Framework/Aluminum Oxide Composite Nanosheets As a Separator for High-Performance Lithium–Sulfur Batteries

Effects of the Separator MOF-Al 2 O 3 Coating on Battery Rate Performance and Solid–Electrolyte Interphase Formation

Recent Progress and Challenge in Metal–Organic Frameworks for Lithium–Sulfur Battery Separators

Novel Composite Separators Based on Heterometallic Metal‐Organic Frameworks Improve the Performance of Lithium‐Ion Batteries

MOF particles (UiO-66 and UiO-66(Ce))/cellulose nanocomposite separators with regulating ion transport controllably for lithium battery

Titanium-Containing Metal–Organic Framework Modified Separator for Advanced Lithium–Sulfur Batteries

Application of Metal/Covalent Organic Frameworks in Separators for Metal‐Ion Batteries

Polydopamine-assisted in-situ formation of dense MOF layer on polyolefin separator for synergistic enhancement of lithium-sulfur battery

MoO2@C Modified Separator As an Interlayer for High Performance Lithium–sulfur Batteries

Metal‐Organic Framework Sandwiching Porous Super‐Engineering Polymeric Membranes as Anionphilic Separators for Dendrite‐free Lithium Metal Batteries

Uniform Poly(vinyl ethylene carbonate) based metal-organic framework separator for smooth lithium-ion electrodeposition

Structure Optimization for Cellulose‐Based Separator through Fiber Size Regulation for High Performance Lithium Metal Batteries

MoO 2 @C modified separator as an interlayer for high performance lithium–sulfur batteries

Novel Bifunctional Separator with a Self-Assembled FeOOH/Coated g-C 3 N 4 /KB Bilayer in Lithium–Sulfur Batteries

Metal-Organic Frameworks Functionalized Separators for Lithium-Sulfur Batteries

Functional Separator Enabled by Covalent Organic Frameworks for High‐Performance Li Metal Batteries

Zinc oxide nanoparticles intercalated with porous carbon as a separator coating for improving the stability of lithium metal anodes

MOF and its derivative materials modified lithium–sulfur battery separator: a new means to improve performance

MOF-Based Separator in an Li–O2 Battery: an Effective Strategy to Restrain the Shuttling of Dual Redox Mediators