Abstract:Researchers have made significant efforts over the past few decades to understand adsorption by developing various simple adsorption isotherm models. However, though many contaminants usually occur as multicomponent mixtures in nature, multicomponent adsorption isotherms have received limited attention and remain an area of inadequate research. We have presented here in a new multicomponent adsorption isotherm model, named the Jeppu Amrutha Manipal Multicomponent (JAMM) isotherm, that can alleviate this problem. We first developed the JAMM multicomponent isotherm using our experimental data sets of arsenic and fluoride competitive adsorption on activated carbon. We then tested the JAMM multicomponent isotherm for a case study of cadmium and zinc competitive adsorption. Next, we further assessed the JAMM isotherm using another competitive adsorption case study of copper and chromium. Through extensive validation studies and error analysis, the JAMM isotherm was able to demonstrate its efficacy in predicting the adsorption behavior in several multicomponent adsorption systems accurately. The main advantage of JAMM isotherm over other multicomponent isotherms is that it utilizes and leverages the single-component adsorption parameters to simulate multicomponent isotherms. The proposed JAMM analytical isotherm model furthermore incorporates the interaction between the components, a mole fraction parameter, and a heterogeneity index, providing a more comprehensive modeling framework for multicomponent adsorption. The mole fraction term was introduced for the distribution of adsorption sites based on the relative number of molecules of each component. An additional term for interaction coefficient was introduced for the representation of interactions. During the validation of JAMM with three experimental case studies with negligible, small, and high competition systems of adsorbates, impressive predictions were exhibited, with the average normalized absolute percentage error as 6.05% and average <i>R</i><sup>2</sup> as 0.86, highlighting the model's robustness, versatility, and reliability. We propose that the new JAMM isotherm modeling framework might profoundly help in chemical engineering, environmental engineering, and materials science applications by providing a potent tool for analyzing and predicting multicomponent adsorption systems.

Modeling of Aqueous Phase Adsorption: is It Time to Bid Adieu to the Harkins–Jura Isotherm?

Parameter-by-parameter Estimation Method for Adsorption Isotherm in Hydrophobic Interaction Chromatography

The Jossens isotherm: A critical look at water contaminant adsorption modeling

Boyd's film diffusion model for water contaminant adsorption: Time for an upgrade?

Simple isotherm equations to fit type I adsorption data

A Universal Isotherm Model to Capture Adsorption Uptake and Energy Distribution of Porous Heterogeneous Surface

Adsorption Isotherm Models: Classification, Physical Meaning, Application and Solving Method

Modeling of multi-temperature Type I and II benzene/ammonia adsorption isotherms: Dual LF model and linearized DR model

Bridging the Adsorption Data and Adsorption Process by Introducing a Polynomial Structure To Accurately Describe IUPAC Isotherms, Stepwise Isotherms, and Stepwise Breakthrough Curves

Adsorption Modeling Based on Classical Density Functional Theory and PC-SAFT: Temperature Extrapolation and Fluid Transfer

Freundlich Isotherm: An Adsorption Model Complete Framework

Study on Optimum IUPAC Adsorption Isotherm Models Employing Sensitivity of Parameters for Rigorous Adsorption System Performance Evaluation

How to avoid mistakes in treating adsorption isotherm data (liquid and solid phases): Some comments about correctly using Radke-Prausnitz nonlinear model and Langmuir equilibrium constant

Mathematically Modeling Fixed-Bed Adsorption in Aqueous Systems

Development of a Multicomponent Adsorption Isotherm Equation and Its Validation by Modeling

Isotherm models for adsorption of heavy metals from water - A review

Batch adsorption isotherm models applied in single and multicomponent adsorption systems – a review

Evaluating isotherm models for the prediction of flue gas adsorption equilibrium and dynamics

Guideline for modeling solid-liquid adsorption: Kinetics, isotherm, fixed bed, and thermodynamics

Comparison and interpretation of isotherm models for the adsorption of dyes, proteins, antibiotics, pesticides and heavy metal ions on different nanomaterials and non-nano materials—a comprehensive review

Comparing different versions of the Yoon–Nelson model in describing organic micropollutant adsorption within fixed bed adsorbers