Construction of a Microchannel Aeration Cathode for Producing H 2 O 2 via Oxygen Reduction Reaction
Yuwei Gu,Shuai Wu,Yujia Cao,Meng Liu,Shuo Chen,Xie Quan,Hongtao Yu
DOI: https://doi.org/10.1021/acsami.1c14969
2021-11-17
Abstract:Electrochemical oxygen reduction is a promising method for in situ H<sub>2</sub>O<sub>2</sub> production. Its important precondition is that dissolved oxygen molecules have to diffuse to and arrive at the cathode surface for reacting with electrons. Obviously, shortening the diffusion distance is beneficial to improve the reaction efficiency. In this study, a novel microchannel aeration mode was proposed to confine the diffusion distance of O<sub>2</sub> to the micrometer level. For this mode, an aeration cathode was fabricated from a carbon block with microchannel arrays. The diameter of each channel was only 10-40 μm. Oxygen will be pumped into every microchannel from the top entry, while an aqueous solution will permeate into microchannels through the bottom entry and pores in the channel wall. This microchannel aeration cathode exhibited a H<sub>2</sub>O<sub>2</sub> yield of up to 4.34 mg h<sup>-1</sup> cm<sup>-2</sup>, about eight times higher than that of the common bubbling aeration mode. The corresponding energy consumption was only 7.35 kWh kg<sup>-1</sup>, which was superior to most reported results. In addition to H<sub>2</sub>O<sub>2</sub>, this aeration cathode may also produce <sup>•</sup>OH via a one-electron reduction of H<sub>2</sub>O<sub>2</sub>. In combination with H<sub>2</sub>O<sub>2</sub> and <sup>•</sup>OH, phenol, sulfamethoxazole, and atrazine were degraded effectively. We expect that this microchannel aeration cathode may inspire researchers focused on H<sub>2</sub>O<sub>2</sub> production, water pollutant control, and other multiphase interfacial reactions.
materials science, multidisciplinary,nanoscience & nanotechnology