Abstract:Polyoxymethylene Dimethyl Ether (PODEn) is a promising green additive to diesel fuel, owing to the unique chemical structure (CH3O[CH2O](n)CH3, n >= 2) and high cetane number. Together with the general wide-distillation fuel (WDF), which has an attractive potential to reduce the cost of production of vehicle fuel, the oxygenated WDF with PODEn can help achieve a high efficiency and low emissions of soot, NOx, HC, and CO simultaneously. In this paper, the first detailed reaction mechanism (225 species, 1082 reactions) which can describe the ignition characteristics of PODE1 and PODE3 at low temperature was developed. To validate this mechanism, rapid compression machine (RCM) was used to conduct the quasi-homogeneous experiments to measure the ignition delay time at various effective temperatures (600 K - 1000 K) for four different PODE1/O-2/N-2/Ar mixture (phi=0.25, O-2:Ar=1:5; phi=0.5, O-2:Ar:N-2 = 1:2.5:2.5; phi=1.0, O-2:Ar:N-2 = 1:2.5:2.5; phi=1.0, O-2:Ar:N-2 = 1:5:5) and two different effective pressures (10 bar, 19 bar). Homogeneous Charge Compression Ignition (HCCI) experiments fueled with PODEn (n=1-4) mixture, in which the mass fraction of PODE3 is about 88.9% were also conducted in a naturally aspirated single-cylinder HCCI research engine at 1600 r/min, 0.4 charge-mass equivalence ratio, and 42% exhaust gas recirculation (EGR) to take the real engine working condition into consideration. Good agreement was achieved in the comparison of the experimental data and the simulation results utilizing our newly developed mechanism for PODE1 and PODE3. Considering the fact that PODEn is more frequently used as a blending component in diesel engine, a reduced multicomponent mechanism (354 species, 943 reactions) for oxygenated WDF with PODEn (covering surrogates like PODE3, n-heptane, iso-octane, etc.) was developed and then validated with Direct-Injection Compression Ignition (DICI) engine experiments fueled with oxygenated WDF (gasoline/diesel/PODEn mixture) at 1600 r/min, 0.8 MPa indicated mean effective pressure (IMEP), and 25% EGR. This surrogate model will contribute to the design of oxygenated WDF by blending PODEn, and to the prediction of the combustion and emission characteristics of engines using oxygenated WDF.

Thermodynamics of the Heterogeneous Synthesis of Polyoxymethylene Dimethyl Ethers from Paraformaldehyde and Dimethoxymethane in Presence of Methanol and Water

Molecular Size Distribution in Synthesis of Polyoxymethylene Dimethyl Ethers and Process Optimization Using Response Surface Methodology

Identification of the Rate-Determining Step for the Synthesis of Polyoxymethylene Dimethyl Ethers from Paraformaldehyde and Dimethoxymethane

Effects of water and methanol on synthesis of polyoxymethylene dimethyl ethers from dimethoxymethane and paraformaldehyde

Kinetics of synthesis of polyoxymethylene dimethyl ethers from paraformaldehyde and dimethoxymethane catalyzed by ion-exchange resin

Theoretical Calculations on the Thermodynamics for the Synthesis Reactions of Polyoxymethylene Dimethyl Ethers

Mechanism of Chain Propagation for the Synthesis of Polyoxymethylene Dimethyl Ethers

A Chemical Kinetic Mechanism for the Low- and Intermediate-Temperature Combustion of Polyoxymethylene Dimethyl Ether 3 (PODE3)

Research progress on the spray, combustion and emission of polyoxymethylene dimethyl ethers as a diesel blend fuel: A review

Development Of Surrogate Model For Oxygenated Wide-Distillation Fuel With Polyoxymethylene Dimethyl Ether

The Synthesis of Polyoxymethylene Dimethyl Ethers for New Diesel Blending Component

Synergistic effect of Brønsted and Lewis acid sites for the synthesis of polyoxymethylene dimethyl ethers over highly efficient SO 4 2− /TiO 2 catalysts

Progress and prospect of polyoxymethylene dimethyl ethers

A conceptual model of polyoxymethylene dimethyl ether 3 (PODE 3 ) spray combustion under compression ignition engine-like conditions

Synthesis of polyoxymethylene dimethyl ethers over different microporous and mesoporous zeolites: the effects of acidity and pore size

Efficient Synthesis of Polyoxymethylene Dimethyl Ethers on Al-SBA-15 Catalysts with Different Si/Al Ratios and Pore Sizes

Exploration of the oxidation chemistry of dimethoxymethane: Jet-stirred reactor experiments and kinetic modeling

Recent Progress in the Application in Compression Ignition Engines and the Synthesis Technologies of Polyoxymethylene Dimethyl Ethers

Polymer-based solid acids with adjustable textural and hydrophobic properties for polyoxymethylene dimethyl ethers synthesis from formaldehyde and methanol

Synergy of Lewis and Brønsted acid sites for polyoxymethylene dimethyl ether synthesis from methanol and formaldehyde solution over Zr4+ modified sulfonated resin

Decomposition of polyoxymethylene dimethyl ethers and synthesis of bisphenol F