Abstract:Nitrate (NO 3 - ) is an important industrial chemical used as fertilizers in agriculture, as well as oxidizing agents in explosives. Today, NO 3 - is manufactured predominantly via an Ostwald process by oxidizing ammonia (NH 3 ), and the ammonia used here comes primarily from the Haber–Bosch (HB) process.However, this process operates at high temperatures (300–500 °C) and pressures (200–300 bar), and requires a coupled steam reforming plant for hydrogen (H 2 ) production. As a result, approximately 1.9 metric tons of CO 2 is formed per metric ton of NH 3 produced, contributing significantly to climate change. In addition, due to the complexity of the Ostwald and Haber-Bosch processes, it is only economical at large scales, leading to centralized production, which situation is poorly matched with the distributed nature of HNO 3 utilization. Therefore, it is highly desirable to bypass the ammonia route and develop a direct and sustainable approach for HNO 3 synthesis. Electrochemical synthesis of chemicals has been regarded as an attractive alternative to traditional thermochemical methods. In electrochemical reactions, electric potential can replace high temperature and pressure as the thermodynamic driving force.Therefore, direct electrochemical oxidation of molecular nitrogen appears to be a very potential approach for HNO 3 synthesis,which could be sustainable, modular and easily integrated with intermittent renewable electricity. However, due to the lack of natural or artificial electrocatalysts as a reference, the nitrogen oxidation reaction (NOR) remains largely unexplored despite its enormous practical value as a replacement for the fossil fuel-driven two-step HNO 3 preparation approach.Until 2019, Zhang et al. reported the first experimental NOR electrocatalyst composed of well-dispersed Pd nanoparticles on MXene nanosheets that can effectively convert N 2 into nitrate, which definitely proved the feasibility of using electrochemistry to motivate the endothermic NOR at ambient conditions. Unfortunately, to date, there are still only a few works that reported the electrosynthesis of nitrate from nitrogen, and the proposed electrocatalysts can only achieve limited NOR activity. An in-depth exploration of the NOR process, which consists of two main steps: the first step is a rate-limiting step that converts inert N 2 into the active NO* intermediate; the second step is a nonelectrochemical step where NO* reacts with H 2 O and the generated O* from electrocatalytic water splitting to form nitrate. Therefore, the main factors restricting the development of the electrochemical nitrate synthesis technology can be inferred as follows: (1) the strong N≡N triple bond in the dinitrogen molecule (bond energy: 940.95 kJ mol −1 ) is highly challenging to oxidate nitrogen to nitrate under mild conditions; (2) the potential window between the NOR and oxidation evolution reaction (OER) is quite narrow, and thus the latter as a competitive reaction can severely restrict the selectively of the nitrogen oxidation synthesis of nitrate; (3) the extremely low solubility and diffusion coefficient of N 2 in aqueous electrolytes can significantly inhibit the nitrogen available for the reaction, resulting in unfavorable NOR performance. Therefore, to overcome the above obstacles, extensive studies should focus on designing efficient nitrogen oxidation catalysts and improving electrochemical reaction systems to promote NOR and suppress OER. In the present work, we firstly discovered that synthesizing Ru particles grow along the TiO 2 lattice (Ru-TiO 2 ) as the working electrode and can achieve excellent NOR performance by using air as a gas source. Textural analysis sufficiently demonstrates that the matching lattice constants of metal Ru and TiO 2 allow the Ru to be confined in the TiO 2 lattice, leading to the formation of Ru-Ti bonds and the transfer of electrons from TiO 2 to Ru metal. Our results reveal that the electron redistribution of Ru-TiO 2 can significantly alter the electronic structure of Ru, leading to the formation of highly occupied Ru 4d bands, which can effectively change the adsorption of surface species and improve the NOR activity. In addition, the Ru confined in TiO 2 exhibits particularly high stability towards NOR up to potentials above 1.7 V (versus RHE). As a result, Ru-TiO 2 could achieve a record-high NOR performance with a nitric acid yield rate of 18.71 ug h -1 cm -2 (150.2 μmol h -1 g -1 ) and Faraday efficiency of 25.17% in the air atmosphere. This discovery suggests that the surface oxophilicity and electronic structure of metal particles can be effectively modified by lattice confinement in semiconductors and offers an alternative concept for designing catalysts with unique properties for use in catalysis and beyond. Figure 1

Integrating RuO2@TiO2catalyzed Electrochemical Chlorine Evolution with a NO Oxidation Reaction for Nitrate Synthesis

Integrating RuO2@TiO2 catalyzed electrochemical chlorine evolution with NO oxidation reaction for nitrate synthesis

In Situ Loading of Cu2O Active Sites on Island-like Copper for Efficient Electrochemical Reduction of Nitrate to Ammonia.

Unveiling the Critical Role of TiO2-supported Atomically Dispersed Cu Species for Enhanced Photofixation of N2 to Nitrate

Integrating Ozone Pollutant Elimination in N2 Electrolysis to Produce Nitrate with Reduced Reaction Steps

Ruthenium doping: An effective strategy for boosting nitrite electroreduction to ammonia over titanium dioxide nanoribbon array

Ti3+ redox dynamics enabling efficient nitrate reduction to ammonia on Ti2O3

Rational design of electrocatalytic system to selective transform nitrate to nitrogen

Highly efficient and selective nitrate electroreduction to ammonia catalyzed by molecular copper catalyst@Ti 3 C 2 T x MXene

Achieving High Selectivity for Nitrate Electrochemical Reduction to Ammonia over MOF-supported RuxOy Clusters

Interface mediated electron structure tuning of RuOx-Co3O4 nano-particles for efficient electrocatalytic nitrate reduction

Constructing Co@TiO2 Nanoarray Heterostructure with Schottky Contact for Selective Electrocatalytic Nitrate Reduction to Ammonia

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Synergistic Effect of Oxygen Defects and Hetero-Phase Junctions of TiO2 for Selective Nitrate Electroreduction to Ammonia

Ni@TiO 2 Nanoarray with the Schottky Junction for the Highly Selective Electrochemical Reduction of Nitrite to Ammonia

Subnanometric alkaline-earth oxide clusters for sustainable nitrate to ammonia photosynthesis

Efficient Synthesis of Nitric Acid Under Air Atmosphere with Lattice-Confined Ru Clusters

Rational Construction of Heterostructured Cu3P@TiO2 Nanoarray for High‐Efficiency Electrochemical Nitrite Reduction to Ammonia

Efficient electrocatalytic nitrate reduction via boosting oxygen vacancies of TiO2 nanotube array by highly dispersed trace Cu doping

Efficient purification of a nitrate and chlorate mixture in water via photoredox activated intermediate coupling-decoupling pathway

Ethylene Glycol (Eg)-Derived Chlorine-Resistant Cu0/TiO2-x for Efficient Photocatalytic Degradation of Nitrate to N2 Without Sacrificial Agents at Near-Neutral Ph Conditions: the Synergistic Effects of Cu0 and EG Radicals.