Abstract:Abstract In the last two years, three major technical improvements have been made on J-TEXT in supporting of the expanded operation regions and diagnostic capabilities. (1) The successful commission of the 105 GHz/500 kW/1 s electron cyclotron resonance heating (ECRH) system increasing the core electron temperature from 0.9 keV up to around 1.5 keV. (2) The poloidal divertor configuration with an X -point in the high-field side has been achieved. In particular, the 400 kW electron cyclotron wave has also been successfully injected into the diverted plasma. (3) A 256-channel electron cyclotron emission imaging diagnostic system and two sets of four-channel Doppler backscattering diagnostics have been successfully developed on J-TEXT, allowing detailed measurement of the electron temperature and density fluctuations for turbulence and MHD research. The locked mode (LM), especially the 2/1 LM, is one of the biggest threats to the plasma operation. Both the thresholds of 2/1 and 3/1 LM are observed to vary non-monotonically on electron density. The electrode biasing was applied successfully to unlock the LM from either a rotating or static resonant magnetic perturbation (RMP) field. In the presence of 2/1 LM, three kinds of standing wave (SW) structures have been observed to share a similar connection to the island structure, i.e. the nodes of the SWs locate around the O - or X -points of the 2/1 island. The control and mitigation of disruption is essential to the safe operation of ITER, and it has been systematically studied by applying a RMP field, massive gas injection (MGI) and shattered pellet injection on J-TEXT. When the RMP-induced 2/1 LM is larger than a critical width, the MGI shutdown process can be significantly influenced. If the phase difference between the O -point of LM and the MGI valve is +90° (or −90°), the penetration depth and the assimilation of impurities can be enhanced (or suppressed) during the pre-thermal quench (TQ) phase and result in a faster (or slower) TQ. A secondary MGI can also suppress the runaway electron (RE) generation, if the additional high-Z impurity gas arrives at the plasma edge before TQ. When the secondary MGI has been applied after the formation of the RE current plateau, the RE current can be dissipated, and the dissipation rate increases with the injected impurity quantity but saturates with a maximum of 28 MA s −1 . The non-local transport is experimentally observed in the ion transport channel. The electron thermal diffusivity significantly increases with the ECRH power. Theoretical work shows that significant intrinsic current can be driven by electromagnetic turbulence, and the robust formation mechanism of the E × B staircase is identified from the Hasegawa–Wakatani system.

Electron Cyclotron Heating Assisted Start-Up Experiments in J-TEXT

Experimental Study of Electron Cyclotron Heating Assisted Start-Up on J-TEXT

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

Experimental research of ECW pre-ionization and assisted startup in EAST

Recent Progress of the ECRH System and Initial Experimental Results on the J-TEXT Tokamak

Advances in physics and applications of 3D magnetic perturbations on the J-TEXT tokamak

Experimental and numerical modeling of plasma start-up assisted by electron drift injection on J-TEXT

Overview of the Recent Experimental Research on the J-TEXT Tokamak

ECW assisted plasma startup with low toroidal electric field and full metal wall in EAST superconducting tokamak

Reconstruction of the COMPSS-D ECRH Systems on the J-TEXT Tokamak

Elevation of Runaway Electron Current by Electron Cyclotron Resonance Heating During Disruptions on J-TEXT

Breakdown Assisted By A Novel Electron Drift Injection In The J-Text Tokamak

Progress of Physics Understanding for Long Pulse High-Performance Plasmas on EAST Towards the Steady-State Operation of ITER and CFETR

Study of the Fast Electron Behavior in Electron Cyclotron Current Driven Plasma on J-TEXT

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

On the Breakdown Modes and Parameter Space of Ohmic Tokamak Start-Up

Validation of the plasma-wall self-organization model for density limit in ECRH-assisted start-up of Ohmic discharges on J-TEXT

Observation of the electron thermal transport and temperature fluctuations for electron cyclotron resonance heated plasmas on J-TEXT

Investigation of Electron Cyclotron Current Drive Efficiency on the J-TEXT Tokamak

Progress of Recent Experimental Research on the J-TEXT Tokamak

Toroidal injection angle dependence of EC assisted plasma initiation at DIII-D