Abstract:Modern civilization and cutting-edge technologies and tools are highly dependent on energy storage devices and demand efficient and long-lasting high-energy-density storage devices. Lithium metal batteries have surpassed their competitors concerning energy density due to their inherent high specific capacity (3860 mAh/g) and the lowest electrochemical potential (-3.04 V vs. standard hydrogen electrode), proving to be one of the most favorable energy storage devices for smart and mobile gadgets, electric automobiles, grid storage, etc. However, safety-threatening and performance-decay challenges associated with lithium metal anodes, such as lithium dendrite formation, uncontrolled parasitic reactions between Li-metal and electrolyte, low coulombic efficiency, dead Li-formation, etc., restrict its employment in practical batteries. The root cause of the dendrite formation is poor Li-ion conductivity of bulk lithium metal, which results in an uneven electric field distribution, leading to non-uniform Li deposition/stripping upon repeated charge/discharge. Herein, a facile chemical reduction process is being opted to fabricate a highly Li-ion diffusive Li-Sn-based artificial SEI layer on the lithium metal surface to prevail over the above-mentioned issues. Therefore, upon careful concentration investigation of reactants, 25 mM precursor concentration (SnCl 4 in EC: DMC in 1:1 volume ration) demonstrated the best electrochemical performance, revealing a cumulative capacity of over 700 mAh/cm 2 at a current density of 1 mA/cm 2 for 1 h in a symmetric cell. Physical characterizations (XRD and SEM-EDS) showed a thin layer containing Li-Sn alloys along with LiCl formed at the lithium metal surface. Possessing high Li-ion diffusivity, Li-Sn alloyed hybrid anode illustrated a gradual decrease in the charge transfer resistance on increasing the concentration, thus, lower overpotential in symmetric cells, in contrast to pristine Li-metal. However, an increase in the electrical resistance has been observed on increasing the precursor concentration due to the presence of the insulating LiCl phase in the protective layer. Moreover, in-situ optical microscopy demonstrated more uniform and on-surface Li-deposition for the hybrid electrode, whereas mossy and dendritic growth on bare Li-metal. Full cells prepared with Li-Sn alloyed anode against NMC532 cathode illustrated stable cycling up to 150 cycles; contrastingly, the cell with pristine Li-metal showed a drastic capacity fade just after 100 cycles, demonstrating the inclination towards safer lithium metal batteries.

In Situ Artificial Solid Electrolyte Interface Engineering on an Anode for Prolonging the Cycle Life of Lithium-Metal Batteries.

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

Artificial Solid Electrolyte Interphase Engineering toward Dendrite-Free Lithium Anodes

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Synergistic effect of LixSi/Li3N artificial interface and 3D framework for enabling Dendrite-free, long-life lithium metal anodes

In Situ‐Constructed Multifunctional Composite Anode with Ultralong‐Life Toward Advanced Lithium‐Metal Batteries

Fluorinated Interface Layer with Embedded Zinc Nanoparticles for Stable Lithium-Metal Anodes.

N, F-enriched Inorganic/organic Composite Interphases to Stabilize Lithium Metal Anodes for Long-Life Anode-Free Cells.

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

Dendrites‐Free Lithium Metal Anode Enabled by Synergistic Surface Structural Engineering

Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries

A Sustainable Solid Electrolyte Interphase for High‐Energy‐Density Lithium Metal Batteries under Practical Conditions

Li-Sn Alloyed Layer Containing Artificial SEI on Li-Metal Anode for Superior Lithium Metal Batteries: Development and Understanding of Anode/Electrolyte Interfacial Phenomena

A Dual Functional Artificial SEI Layer Based on a Facile Surface Chemistry for Stable Lithium Metal Anode

In Situ Self‐Assembly of Ordered Organic/Inorganic Dual‐Layered Interphase for Achieving Long‐Life Dendrite‐Free Li Metal Anodes in LiFSI‐Based Electrolyte

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

In situ Construction of Robust Biphasic Surface Layers on Lithium Metal for Lithium-Sulfide Batteries with Long Cycle Life

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries