Abstract:Laser stabilization sits at the heart of many precision scientific experiments and applications, including quantum information science, metrology and atomic timekeeping. These systems narrow the laser linewidth and stabilize the carrier by use of Pound-Drever-Hall (PDH) locking to a table-scale, ultra-high quality factor (Q), vacuum spaced Fabry-Perot reference cavity. Integrating these cavities, to bring characteristics of PDH stabilization to the chip-scale, is critical to reduce their size, cost, and weight, and enable a wide range of portable and system-on-chip applications. We report a significant advance in integrated laser linewidth narrowing, stabilization and noise reduction, by use of a photonic integrated 4.0-meter-long coil resonator to stabilize a semiconductor laser. We achieve a 36 Hz 1/{\pi}-integral linewidth, an Allan deviation (ADEV) of 1.8x10^{-13} at 10 ms measurement time, and a 2.3 kHz/sec drift, to the best of our knowledge the lowest integral linewidth and highest stability demonstrated for an integrated reference cavity. Two coil designs, stabilizing lasers operating at 1550 nm and 1319 nm are demonstrated. The resonator is bus coupled to a 4.0-meter-long coil, with a 49 MHz free spectral range (FSR), a mode volume of 1.0x10^{10} {\mu}m^3 and a 142 million intrinsic Q, fabricated in a CMOS compatible, ultra-low loss silicon nitride waveguide platform. Our measurements and simulations show that the thermorefractive noise floor for this particular cavity is reached for frequencies down to 20 Hz in an ambient environment with simple passive vibration isolation and without vacuum or thermal isolation. The TRN limited performance is estimated to be an 8 Hz 1/{\pi} integral linewidth and ADEV of 5x10^{-14} at 10 ms, opening a stability regime that heretofore has only been available in fundamentally un-integrated systems.

Stability of Silicon Resonator Temperature Sensors with the Pound-Drever-Hall Technique

Pound-drever-hall locking system for precise temperature measurement based on silicon ring resonators

High-Resolution Photonic Temperature Measurement System Based on Frequency Locking of Microring Resonator

Measurement Accuracy in Silicon Photonic Ring Resonator Thermometers: Identifying and Mitigating Intrinsic Impairments

Integrated High-Performance Two-Stage Ratiometric Wavelength Monitors on Silicon

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

Research on High-Precision Silicon-Based Integrated Optical Temperature Sensor

Ultra-sensitive chip-based photonic temperature sensor using ring resonator structures

Self-Referenced Temperature Sensors Based on Cascaded Silicon Ring Resonator

Temperature-insensitive Cascaded Micro-Ring Resonator Silicon Photoelectric Sensor Based on Wavelength Interrogation for HSA Detection

The Application of Pound–Drever–Hall Technology in High-Resolution Sensing—A Review

Wide-range and Ultra-Low Temperature Thermometer Based on a Silicon Resonator.

The Application of PoundDreverHall Technology in High-Resolution SensinguA Review

Biotoxoid Photonic Sensors with Temperature Insensitivity Using a Cascade of Ring Resonator and Mach-Zehnder Interferometer

A ScAlN-based piezoelectric breathing mode dual-ring resonator with high temperature stability

Chip-Scale Silicon Ring Resonators for Cryogenic Temperature Sensing

A Resonant Low-Pressure Microsensor With Low Temperature Disturbance

Integrated Reference Cavity for Dual-mode Optical Thermometry and Frequency Stabilization

Study on a High-Precision Piezoelectric Resonators Quartz Crystal Temperature Sensor by Means of Three-Dimensional Finite Element Method

36 Hz integral linewidth laser based on a photonic integrated 4.0-meter coil resonator

Quadrature Operating Point Stabilizing Technique for Fiber-Optic Fabry–Perot Sensors Using Vernier-Tuned Distributed Bragg Reflectors Laser