Abstract:The flow characteristics of an isothermal turbulent jet impinging normally on a flat plate was studied experimentally using hot-wire anemometry. The air jet discharged from a round pipe with an inner diameter D and the distance between the pipe exit and the flat impingement plate was 9D. The Reynolds number, based on the jet centerline velocity at pipe exit and the pipe inner diameter, was 10,338. Measurements were performed in the free- and wall-jets, mean velocity, RMS, Reynolds shear stress, higher-order moments of velocity fluctuations, dissipation spectrum as well as spatial characteristic scale results being presented. Moreover, a multiscale analysis method based on wavelet transform was applied to gain deeper insight into the multiscale turbulent structures and to extract the most essential scales governing the development of the turbulent flow structures of the impinging jet. The experimental results show that the normal velocity fluctuations have the greatest skewness and the highest intermittency in the mixing region and this characteristic is more prominent downstream the pipe exit. The radial velocity fluctuations at a small distance from the flat surface trend towards Gaussian values far away the jet centerline. The strongest dissipation structures grows with larger scales and lower frequencies far away from the pipe exit, and the frequency range of the dissipation structures is reduced far away from the jet centerline together with the spatial distribution of the dissipation structures expanding with larger scales and lower frequencies. The scales in the center of the mixing region have the most energy, from which the scales belonging to the inertial range have a trend to shift to the larger scales with the increasing radial traverse, thus the scales of the coherent structures belonging to the dissipation region get more as well as larger. The scales belonging to the inertial range in the wall-jet region tend to the larger scales with the increasing normal traverse.

A Confined Laminar Slot Impinging Jet at Low Reynolds Numbers: Unsteady Flow and Heat Transfer Characteristics

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Turbulent Heat Transfer From a Slot Jet Impinging on a Flat Plate

Modelling Of Impinging Flow And Heat Transfer In A Confined Narrow Gap

Heat Transfer and Flow Structures of Laminar Confined Slot Impingement Jet with Power-Law Non-Newtonian Fluid

Study on Flow Structure and Heat Transfer Mechanism of Inclined Jet Impinging on the Rotating Cylindrical Target Surface in the Confined Space

Analysis Of Heat Transfer And Fluid Flow Of A Slot Jet Impinging On A Confined Concave Surface With Various Curvature And Small Jet To Target Spacing

Numerical Simulation of Flow and Heat Transfer from Slot Jets Impinging on A Cylindrical Convex Surface

Direct Numerical Simulation of Flow over a Slotted Cylinder at Low Reynolds Number

Numerical Analysis of Heat Transfer Intensity from Twin Slot Vertical Jet Impingement on Strip Surface after Hot Rolling

Numerical simulation of slot jet impingement heat transfer based on one-equation intermittency transition model

Numerical Study on Stagnation Point Heat Transfer by Jet Impingement in A Confined Narrow Gap

Flow and Heat Transfer Characteristic of Single and Multiple Slot Jets Impingement on a Cylindrical Convex Surface

Numerical Study on Heat Transfer Characteristics of Multiple Air Jet Impinging at Lower Jet to Plate Spacing

An Experimental Study of a Turbulent Jet Impinging on a Flat Surface

Unsteady Flow and Heat Transfer Behavior of Impinging Synthetic Jets: A Phase-Locked Synchronous Measurement

Three-Dimensional Simulation of Turbulent Rectangular and Square Impinging Jet Flows

Les Of Normally Impinging Round Air-Jet With Heat Transfer At Moderate Reynolds Numbers

Numerical Investigation of Heat Transfer Characteristics of Impinging Synthetic Jets with Different Waveforms

Effect of Oblique Angle on Flow and Heat Transfer Characteristics of a Turbulent Impinging Slot Jet

Analysis of Disagreement Between Numerically Predicted and Experimental Heat Transfer Data of Impinging Jet