Abstract:Hydraulic fracturing has become an essential stimulation treatment for improving the development efficiency of low-permeability oil reservoirs. However, fracturing fluid inevitably causes reservoir damage. This study proposed a combined method of microscopic and macroscopic experiments to investigate the nature of formation damage of fracturing fluid by quantifying its influence on porosity, permeability, and pore structure. Nuclear magnetic resonance technology combined with core flooding test and parallel sample comparison method was applied to quantitatively evaluate the damage degree and identify the main damage types of hydroxypropyl guar (HPG) fracturing fluid and slickwater fracturing fluid. The microscopic damage mechanisms of these fracturing fluids were analyzed by thin section petrography, X-ray diffraction, rate-controlled mercury intrusion, scanning electron microscopy, and wettability tests. The results show that the total permeability damage degree of HPG fracturing fluid filtrate is 30.43%, of which water sensitivity, water lock, and macromolecule adsorption account for 6.06%, 23.26%, and 1.11%, respectively. Water lock is the major damage factor. Regarding the damage of slickwater fracturing fluid filtrate, water sensitivity causes the severest damage, corresponding to 39.08% of core permeability loss, whereas macromolecule adsorption and water lock contribute 13.21% and 0.97%, respectively. Water sensitivity damage causes reduced porosity, decreased permeability, and narrower pores, resulting from hydration, swelling, dispersion and migration of clay minerals. Water lock damage increases the movable pore volume, decreases the permeability, increases the pore radius, decreases the throat radius, and increases the pore throat ratio, which increases the flow resistance to the oil phase. The magnitude of water lock damage is closely related to the surfactant content and performance, rock wettability, and pore throat radius ratio. Macromolecule adsorption damage leads to a decrease in permeability, a reduction in the number of large pores, an increase in the number of small throats, and an increase in the pore throat radius ratio due to the absorption and retention of macromolecules on the surfaces of the pores and throats. Increasing the flowback volume of slickwater fracturing fluid can recover part of the macromolecule absorption damage. This research can provide a reliable reference for the optimization of fracturing fluid performance, enhancement of the fracturing effect and reservoir protection of low-permeability reservoirs.

Analysis of the influence of guar gum fracturing fluid and reservoir conditions on sandstone permeability and fracturing performance

Experimental investigation on the high-pressure sand suspension and adsorption capacity of guar gum fracturing fluid in low-permeability shale reservoirs: factor analysis and mechanism disclosure

Study of Fracturing Fluid on Gel Breaking Performance and Damage to fracture conductivity

Influence of reservoir physical properties on guar gum fracturing fluid damage in unconventional tight reservoirs

Investigation on the microscopic damage mechanism of fracturing fluids to low-permeability sandstone oil reservoir by nuclear magnetic resonance

Experimental Study on the Effects of Pore Pressure and Slippage on the Permeability of a Fracture Network during Depressurization of Shale Gas Reservoir Production

Coalbed methane reservoir stimulation using guar-based fracturing fluid: A review

Experimental Evaluation of the Rheological Properties and Influencing Factors of Gel Fracturing Fluid Mixed with CO2 for Shale Gas Reservoir Stimulation

Study on the Vertical Propagation Behavior of Hydraulic Fractures in Thin Interbedded Tight Sandstone

Study on Water Displacing Gas Relative Permeability Curves in Fractured Tight Sandstone Reservoirs Under High Pressure and High Temperature

Study on the Mechanism of Nanoemulsion Removal of Water Locking Damage and Compatibility of Working Fluids in Tight Sandstone Reservoirs

Comparative Studies on Hydraulic Fracturing Fluids for High-Temperature and High-Salt Oil Reservoirs: Synthetic Polymer Versus Guar Gum

Experimental Evaluation of Gas Flow Characteristics in Fractured Siltstone under Various Reservoir and Injection Conditions: an Application to CO2-based Fracturing

Effect of Stress and Water Pressure on Permeability of Fractured Sandstone Based on Response Surface Method

Laboratory Research on the Performance of Fracturing Fluid System for Unconventional Oil and Gas Reservoir Transformation

Experimental Study on the Hydraulic Fracture Propagation in Inter-Salt Shale Oil Reservoirs

Numerical Simulation of Hydraulic Fracture Propagation in Unconsolidated Sandstone Reservoirs

A Study on the Influence of Natural Fractures in Tight Sandstone Reservoirs on Hydraulic Fracture Propagation Behavior and Post-Fracture Productivity

The Carrying Behavior of Water-Based Fracturing Fluid in Shale Reservoir Fractures and Molecular Dynamics of Sand-Carrying Mechanism

Study on stress sensitivity of bedding fractures and sand-filled fractures in shale oil reservoirs

Study on fracturing fluid return pattern and production characteristics of shale gas wells