Abstract:For the practical application of optimized truss structures, the local stability of the bar must be considered to obtain stable and realistic structures. However, in the practical design of structures, the initial crookedness of the bars and residual stresses that remain in the bar after the manufacturing process should be taken into account, which makes the buckling strength highly non-connected and non-convex in terms of the cross-sectional properties. Therefore, most conventional truss optimization formulations include only local buckling constraints based on the Euler buckling criterion, while local buckling constraints based on design specifications are rarely incorporated. To treat these problems, a novel topology optimization model for trusses is proposed, where the critical buckling strength is calculated according to the practical design code GB5007-2017. In addition, a linearized iterative allowable stress method is used to solve the optimization model. Since the allowable stresses are calculated at each iteration based on the critical buckling strength, other types of design codes can also be incorporated into the proposed truss topology optimization model. The proposed computational model shows, through several numerical examples, the remarkable effect of including local buckling stability in the optimal design of trusses, while demonstrating that the optimized topology depends on whether the local buckling constraints are derived from the Euler buckling criterion or from actual structural design codes.

Topology Optimization for Minimum Compliance with Material Volume and Buckling Constraints under Design-Dependent Loads

Topology Optimization of Material Nonlinear Continuum Structures under Stress Constraints

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Buckling-constrained Topology Optimization Using Feature-Driven Optimization Method

Topology optimization for maximizing buckling strength using a linear material model

Continuum Structural Topological Optimization with Dynamic Stress Response Constraints

Maximal Stiffness Design of Two-Material Structures by Topology Optimization with Nonprobabilistic Reliability

Topology Optimization of Multiphase Material Structures under Design Dependent Pressure Loads

Finite Strain Topology Optimization with Nonlinear Stability Constraints

Non-probabilistic Reliability Based Topology Optimization Design of Two-material Structures

Topology optimization of structures under multiple loading cases with a new compliance-volume product

Reliability‐based topology optimization of continuum structure under buckling and compliance constraints

Topology Optimization of Stability‐constrained Structures with Simple/multiple Eigenvalues

Minimum Averaged Compliance Density Based Topology Optimization of Structures

Topology optimization design of continuum structure under stress and volumetric material density constraints

Topology Optimization of Trusses Incorporating Practical Local Buckling Stability Considerations

Topology optimization with continuously varying load magnitude and direction for compliance minimization

Topology Optimization of 3D Structures with Design-Dependent Loads

Topology Optimization Of Continuum Structures With Drucker-Prager Yield Stress Constraints

Topology Optimization: A Review for Structural Designs Under Statics Problems