Abstract:Thermoelectric generators (TEGs) based on organic/inorganic nanocomposites have made great achievements in recent years, while rational design of flexible TEGs to harvest energy via cross‐plane heat flux remains a great challenge. Herein, flexible poly(3,4‐ethylenedioxytiophene)‐tosylate/Te/single‐walled carbon nanotubes (PEDOT‐Tos/Te/SWCNTs) ternary nanocomposite films with unique layered structure are synthesized, exhibiting an optimized power factor of 131.9 ± 8.5 µW m–1 K–2 that is ≈120 times of that of the pristine PEDOT‐Tos. A spiral architecture is subsequently proposed to assemble the nanocomposite films into 3D TEGs, resulting in device‐level flexibility, stretchability, and compressibility. The spiral‐like TEGs can realize efficient heat‐to‐electricity conversion through cross‐plane heat flux, and large output powers of 7.04 and 9.59 µW are achieved for the TEG prototypes with 10 p‐type legs and 5 pairs of p‐n couples, respectively, under a temperature difference of 80 K, surpassing most reported TEGs using Te‐based composites. They can also provide stable energy output upon multiple stretching and compressing cycles. Furthermore, the spiral‐like TEGs are demonstrated versatile applications to harvest human body heat on wrist, and to generate electricity via the temperature difference induced by hot water or liquid nitrogen. This work offers a promising route to exploit thermoelectric composites for flexible and wearable applications. A 3D spiral architecture is proposed to fabricate thermoelectric generators (TEGs) with optimized ternary nanocomposite films for flexible and wearable applications. The TEGs can efficiently utilize cross‐plane temperature flux, exhibiting superior heat‐to‐electricity conversion capability. The TEGs can also provide stable energy output after multiple stretching and compressing cycles, and their versatile application scenarios have been demonstrated.

3D-Printed Porous Thermoelectrics for in Situ Energy Harvesting

Prospects of Thermoelectric Energy Harvesting in 3D ICs

3D-printed Bi2Te3-based Thermoelectric Generators for Energy Harvesting and Temperature Response

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Harvesting waste heat with flexible Bi 2 Te 3 thermoelectric thin film

Compliant and Stretchable Thermoelectric Coils for Energy Harvesting in Miniature Flexible Devices

3D-Printing of Shape-Controllable Thermoelectric Devices with Enhanced Output Performance

Thermoelectric Energy Harvesters: A Review of Recent Developments in Materials and Devices for Different Potential Applications

Thermoelectric Nanowires for Dense 3D Printed Architectures

Stretchable Thermoelectric Fibers with Three-Dimensional Interconnected Porous Network for Low-Grade Body Heat Energy Harvesting

3D Printing of Bi2Te3-Based Thermoelectric Materials with High Performance and Shape Controllability

Thermoelectric materials and transport physics

Thermoelectric Generator Design and Characterization for Industrial Pipe Waste Heat Recovery

Direct ink writing of high-performance Bi2Te3-based thermoelectric materials by quasi-inorganic inks and interface engineering

New Directions for Thermoelectrics: A Roadmap from High-Throughput Materials Discovery to Advanced Device Manufacturing

Initiating a Stretchable, Compressible, and Wearable Thermoelectric Generator by a Spiral Architecture with Ternary Nanocomposites for Efficient Heat Harvesting

Machine Learning-Assisted 3D Printing of Thermoelectric Materials of Ultrahigh Performances at Room Temperature

Organic Thermoelectric Textiles for Harvesting Thermal Energy and Powering Electronics

High performance thermoelectric composites via scalable and low-cost ink processing

Flexible Thermoelectric Devices of Ultrahigh Power Factor by Scalable Printing and Interface Engineering