Abstract:Fiber reinforced composite materials are widely used in the aerospace industry due to their high strength to weight ratio. One of their applications is as an ablative material placed at the outermost layer of a thermal protection systems (TPS). A TPS requires the ablative material to have low density, low thermal conductivity, high temperature resistance, formation of a stable and high shear strength char. This paper introduces a carbon fiber (CF) reinforced polysiloxane (UHTR) composite material processed and fabricated in a laboratory environment. The fabrication method of this material is illustrated in detail. Thermal, ablation, flammability, and mechanical properties of the CF/UHTR material are characterized and compared to a commercial model ablative material, MX4926. MX4926 is a carbon fiber phenolic (CF/Ph) composite material manufactured by Solvay-Cytec. In this study, the carbon fiber used to make the CF/UHTR material is a PAN-based 8-harness fabric provided by Hexcel. The polymer matrix, UHTR, is a colorless semi-solid polysiloxane resin manufactured by Techneglas LLC. Raw materials are firstly made into CF/UHTR prepreg sheets through a hot-melt process and then compression molded into molding compound (MC) samples or two-dimensional (2D) laminates by a hot press. All samples for testing are post cured in a programmable oven at 350°C for 2 hours. The density of the fully-cured material is measured by the water displacement method. Thermal stability, flammability, and ablation properties of the material (in the format of MC) are characterized using thermogravimetric analysis (TGA), microscale combustion calorimeter (MCC), and oxyacetylene test bed (OTB) with three different heat fluxes. Mechanical properties of the material (in 2D laminates) are measured by a universal testing machine (UTM) to the ASTM standards. Testing results of the CF/UHTR material are compared with the commercial model ablative material, MX4926. Microstructures of the CF/UHTR material before and after mechanical and ablation tests are investigated and compared by an optical microscope and scanning electron microscopy (SEM) to further study the failure mode of the material.

Oxidation Mechanism of Carbon Fiber Reinforced Hafnium Carbide Composite in Plasma Wind Tunnel

Dynamic oxidation mechanism of carbon fiber reinforced SiC matrix composite in high-enthalpy and high-speed plasmas

Nanosized Hf6Ta2O17 particles reinforced HfC ceramic coating for high temperature applications

Ablation behavior of high-entropy boride (Hf-Zr-Ta-Ti)B 2 coating fabricated via supersonic atmospheric plasma spraying for carbon/carbon composites

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

A novel ablative material for thermal protection system: Carbon fiber/polysiloxane composites

Ablation behavior and mechanisms of Cf/(CrZrHfNbTa)C‒SiC high‐entropy composite at temperatures up to 2450°C

Fabrication of low-density carbon-bonded carbon fiber composites with an Hf-based coating for high temperature applications

Ablation Experiments of Ultra-High-Temperature Ceramic Coating on Carbon–Carbon Composite Using ICP Plasma Wind Tunnel

Long-term oxidation resistant SiC/SiC-SiHfBCN composites: A promising thermo-structural material aims for hypersonic roundtrip

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review

Advances in processing and ablation properties of carbon fiber reinforced ultra-high temperature ceramic composites

Anti-ablation properties of ZrB2 modified carbon/phenolic composites in plasma wind tunnel

Thermoablative behaviors of designable hafnium carbonitride integrated with lattice of tungsten upon 3273K

Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites

Ablation-resistant Ta0.78Hf0.22C solid solution ceramic modified C/C composites for oxidizing environments over 2200 °C

Multiscale structural understanding of plasma spraying anti-ablation coating: an example of Ta-Hf-W-C ultrahigh temperature ceramics

Ultra-high temperature ablation behavior of CVD-Hf 5 TaC 6 solid solution ceramic coating for C/C composites: Experiment and first-principle calculation

Wet oxidation behavior of C/SiC–SiHf(B)CN composites at high temperature

Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)Cx carbide solid solution powders in air