Abstract:Sensor fusion of a MEMS IMU with a magnetometer is a popular system design, because such 9-DoF (degrees of freedom) systems are capable of achieving drift-free 3D orientation tracking. However, these systems are often vulnerable to ambient magnetic distortions and lack useful position information; in the absence of external position aiding (e.g. satellite/ultra-wideband positioning systems) the dead-reckoned position accuracy from a 9-DoF MEMS IMU deteriorates rapidly due to unmodelled errors. Positioning information is valuable in many satellite-denied geomatics applications (e.g. indoor navigation, location-based services, etc.). This paper proposes an improved 9-DoF IMU indoor pose tracking method using batch optimization. By adopting a robust in-situ user self-calibration approach to model the systematic errors of the accelerometer, gyroscope, and magnetometer simultaneously in a tightly-coupled post-processed least-squares framework, the accuracy of the estimated trajectory from a 9-DoF MEMS IMU can be improved. Through a combination of relative magnetic measurement updates and a robust weight function, the method is able to tolerate a high level of magnetic distortions. The proposed auto-calibration method was tested in-use under various heterogeneous magnetic field conditions to mimic a person walking with the sensor in their pocket, a person checking their phone, and a person walking with a smartwatch. In these experiments, the presented algorithm improved the in-situ dead-reckoning orientation accuracy by 79.8 - 89.5% and the dead-reckoned positioning accuracy by 72.9 - 92.8%, thus reducing the relative positioning error from metre-level to decimetre-level after ten seconds of integration, without making assumptions about the user's dynamics.

A Flexible Sensor and MIMU-Based Multisensor Wearable System for Human Motion Analysis

A Scalable and Wearable Self-Sensing IMU Sensor Network for Personalized Human Motion and Deformation Capture

A Novel Adaptive Kalman Filtering Approach to Human Motion Tracking With Magnetic-Inertial Sensors

A Dual-Linear Kalman Filter for Real-Time Orientation Determination System Using Low-Cost MEMS Sensors

Real-Time Human Motion Capture Based on Wearable Inertial Sensor Networks

Hand-Finger Pose Estimation Using Inertial Sensors, Magnetic Sensors and a Magnet

Adaptive Sensor Data Fusion in Motion Capture.

Sensor to Segment Calibration for Magnetic and Inertial Sensor Based Motion Capture Systems

Estimate Hand–Finger Position with One Magnetometer and Known Relative Orientation

An error-based micro-sensor capture system for real-time motion estimation

Mems Inertial Sensors Based Gait Analysis For Rehabilitation Assessment Via Multi-Sensor Fusion

A novel functional calibration method for real-time elbow joint angles estimation with magnetic-inertial sensors

Statistical Sensor Fusion of a 9-DoF MEMS IMU for Indoor Navigation

Improved extended Kalman fusion method for upper limb motion estimation with inertial sensors

Sensor-Movement-Robust Angle Estimation for 3-DoF Lower Limb Joints Without Calibration

Development of a Wearable Device for Motion Capturing Based on Magnetic and Inertial Measurement Units

Detecting and Correcting IMU Movements During Joint Angle Estimation

Heterogeneous Data Fusion for Three-Dimensional Gait Analysis Using Wearable MARG Sensors

A Real-Time Self-Sensing Approach to Sensor Array Configuration Fusing Prior Knowledge for Reconfigurable Magnetic Tracking Systems

Development of a Non-Contacting Muscular Activity Measurement System for Evaluating Knee Extensors Training in Real-Time

Full-pose estimation using inertial and magnetic sensor fusion in structurized magnetic field for hand motion tracking