Abstract:Introduction Wearable motion tracking technology often focuses on reducing the number of sensors to simplify design and lower costs. Research has shown that single IMUs can reconstruct leg kinematics (Gholami et al., 2020; Hossain et al., 2022; Lim et al., 2020) and ground reaction forces (Jiang et al., 2020) effectively. Additionally, model-based methods have demonstrated the feasibility of using fewer gyroscopes to estimate stride length and motion range in healthy individuals and patients with coxarthritis (Salarian et al., 2013). In this study, we aim to assess the precision of sagittal joint angle estimations using strain sensors while minimizing sensor count. Methods We conducted a study with ten participants based on our previous work that involved collecting single-leg treadmill running data to monitor lower limb joint angles with piezoresistive strain sensors. Subjects ran on an instrumented treadmill at 8-10 km/h, wearing athletic pants embedded with nine strain sensors located on the hip, knee, and ankle. Optical motion capture provided reference kinematics. Our prior research achieved less than 1.5° error in the sagittal plane using a machine-learning approach. The current study explores the extent to which sensor reduction is possible without meaningful loss of accuracy. Three evaluation measures were used for assessment: Pearson correlation, dynamic time warping, and root-mean-squared error. Results The results from our correlation analysis will be used to develop a model that optimally balances between accuracy and minimizing the number of sensors. This has practical implications in sports science, where athletes could benefit from less intrusive and more comfortable performance monitoring, and in healthcare, for remote monitoring of patients with mobility issues. References Gholami, M., Napier, C., & Menon, C. (2020). Estimating lower extremity running gait kinematics with a single accelerometer: A deep learning approach. Sensors, 20(10), Article 2939. https://doi.org/10.3390/s20102939 Hossain, M. S., Bin, Dranetz, J., Choi, H., & Guo, Z. (2022). DeepBBWAE-Net: A CNN-RNN based deep superlearner for estimating lower extremity sagittal plane joint kinematics using shoe-mounted IMU sensors in daily living. IEEE Journal of Biomedical and Health Informatics, 26(8), 3906-3917. https://doi.org/10.1109/jbhi.2022.3165383 Jiang, X., Napier, C., Hannigan, B., Eng, J. J., & Menon, C. (2020). Estimating vertical ground reaction force during walking using a single inertial sensor. Sensors, 20(15), Article 4345. https://doi.org/10.3390/s20154345 Lim, H., Kim, B., & Park, S. (2020). Prediction of lower limb kinetics and kinematics during walking by a single IMU on the lower back using machine learning. Sensors, 20(1), Article 130. https://doi.org/10.3390/s20010130 Salarian, A., Burkhard, P. R., Vingerhoets, F. J. G., Jolles, B. M., & Aminian, K. (2013). A novel approach to reducing number of sensing units for wearable gait analysis systems. IEEE Transactions on Biomedical Engineering, 60(1), 72–77. https://doi.org/10.1109/TBME.2012.2223465

Magneto-Gyro Wearable Sensor Algorithm for Trunk Sway Estimation During Walking and Running Gait

Configurable, wearable sensing and vibrotactile feedback system for real-time postural balance and gait training: proof-of-concept

Body-Worn IMU-Based Human Hip and Knee Kinematics Estimation during Treadmill Walking

A Flexible Sensor and MIMU-Based Multisensor Wearable System for Human Motion Analysis

A Motion Adaptive Self-Powered Wearable Sensor for Biomechanical Energy Transduction and Human Gait Sensing

Measuring the Local and Global Variabilities in Body Sway by Nonlinear Poincaré Technology

Validation of algorithms for calculating spatiotemporal gait parameters during continuous turning using lumbar and foot mounted inertial measurement units

A gait stability evaluation method based on wearable acceleration sensors

Optimizing wearable motion tracking by assessing sagittal joint angle accuracy with minimal sensor use

Predicted Threshold for Seated Stability: Estimation of Margin of Stability Using Wearable Inertial Sensors

Towards Wearable Electromyography for Personalized Musculoskeletal Trunk Models using an Inverse Synergy-based Approach

Comparing sparse inertial sensor setups for sagittal-plane walking and running reconstructions

Predicting losses of balance during upright stance: evaluation of a novel approach based on wearable accelerometers

Inertial Sensor-Based Centripetal Acceleration as a Correlate for Lateral Margin of Stability During Walking and Turning

A Potential-Real-Time Thigh Orientation Prediction Method Based on Two Shanks-Mounted IMUs and Its Clinical Application

Kinematic Analysis of Human Gait in Healthy Young Adults Using IMU Sensors: Exploring Relevant Machine Learning Features for Clinical Applications

A Data-Driven Approach to Estimate Human Center of Mass State During Perturbed Locomotion Using Simulated Wearable Sensors

Algorithm for Gait Parameters Estimation Based on Heel-Mounted Inertial Sensors

Human Posture Detection Method Based on Wearable Devices

Effect of sensor number and location on accelerometry-based vertical ground reaction force estimation during walking

Utilizing Inertial Measurement Units for Detecting Dynamic Stability Variations in a Multi-Condition Gait Experiment