Abstract:This paper proposes a straightforward model that can describe the arsenic(As) impurity behavior during the vacuum volatilization purification process of antimony (Sb) metal. This model aims to determine the optimal degree of volatilization and predict As impurity concentration in the purified Sb metal. Vacuum volatilization experiments were conducted to verify this model at the volatilization temperatures of 700 °C, 730 °C, and 760 °C. The research results indicated that, the concentrations of As impurity in both residue and volatile exhibit an exponentially decreasing trend throughout the entire volatilization process; the decrease in the condensing temperature at the different locations of volatiles leads to an increase in As impurity concentration, which is accompanied by the variations in crystal morphology; there is a good agreement between the calculated and experimental results in the residues, which the mean standard deviations are ± 0.025, ±0.094, and ± 0.148 respectively at the above volatilization temperatures; the calculated results are much higher than the experimental results in the volatiles due to the calculated separation coefficient without the consideration of kinetic factor; the optimal volatilization degrees of 36.50 %, 35.95 %, and 38.44 % respectively result in volatilization removal rates and residual rates both exceeding 60 %; Upon the volatilization degrees are equal to 36.94 %, 30.28 %, and 47.09 %, As impurity decreases from the initial concentrations of 27.82 mg/kg, 22.90 mg/kg, and 35.08 mg/kg to the ultimate concentrations of 10 mg/kg respectively, which meets the purity standard of 4.5 N (99.995 %). Consequently, this model can quantitatively predict As impurity concentration in the purified Sb metal, which provides the theoretical guidance for the As removal from Sb metal by vacuum volatilization.

Thermodynamic Modeling of Antimony Removal from Complex Resources in Copper Smelting Process

Thermodynamic simulation of complex Pb−Bi concentrate oxidative bath smelting process

Development and application of matte/speiss/metal thermodynamic database for optimization of processing of drosses, dusts and reverts from lead, zinc and copper production

Selective recovery of antimony from Sb-bearing copper concentrates by integration of alkaline sulphide leaching solutions and microwave-assisted heating: A new sustainable processing route

Separation process for the production of high-purity antimony and bismuth oxides from copper electrorefining circuit wastes: The relevance of the redox control

Mathematical Model of Multistage and Multiphase Chemical Reactions in Flash Furnace

A novel model of bismuth and lead impurities removal behavior in purification of antimony metal by vacuum distillation

Study on the mechanism of copper and arsenic separation in copper smelting acidic solution by arsenic sulfide residue

Exploring arsenic removal behavior in purification process of antimony metal through vacuum volatilization

Multiphase Equilibrium Relationships between Copper Matte and CaO-Al2O3-Bearing Iron Silicate Slags in Combined Smelting of WEEE and Copper Concentrates

Phase Transformation of Impurity Elements and High-efficiency Impurity Removal in Complex Copper Concentrate Smelting Process

Thermodynamics Evaluation and Verification of High-Sulfur Copper Slag Composite Agglomerate in Oxidation-Roasting-Separation-Leaching Process

Removal of SO2 from Smelting Flue Gas by Using Copper Tailings with MnSO4: Factors Optimization by Response Surface Methodology

Thermodynamic analysis and process optimization of zinc and lead recovery from copper smelting slag with chlorination roasting

Phase Evolution and Recovery Rate of Sb in Lead–Silver Slag Treated via Melting–Fuming Method

Thermodynamic Phase Conversion Mechanism on Copper–Cobalt Slag Cleaning Process Using Gypsum Wastes as Sulfurizing Agent

Copper and arsenic substance flow analysis of pyrometallurgical process for copper production

Co-treatment of copper smelting flue dust and arsenic sulfide residue by a pyrometallurgical approach for simultaneous removal and recovery of arsenic

Element Distribution in Oxygen-Enriched Bottom-Blown Smelting of High-Arsenic Copper Dross

Thermodynamic modelling of liquid slag-matte-metal equilibria applied to the simulation of the Peirce-Smith converter

Control of Copper Content in Flash Smelting Slag and the Recovery of Valuable Metals from Slag—A Thermodynamic Consideration