Abstract:The three-dimensional (3D) microstructure of neutron-irradiated uranium-10 wt.% molybdenum (U-10Mo) fuel with a burn-up of 9.8×10 21 fissions/cm 3 was characterized using a novel, multi-modal synchrotron micro-computed tomography approach combining propagation-based phase-contrast enhanced and absorption contrast techniques. The porosity development, porosity interconnectedness, swelling, composition, local thickness of the zirconium (Zr) diffusion barrier, and the influence of the fuel–cladding interaction on the local composition and pore morphology, were uniquely determined in 3D. Two cuboids were produced using a focused ion beam-scanning electron microscope at the Zr diffusion barrier–fuel interface and in the bulk fuel. The bulk fuel sample swelled by 53.3[+9.7/-3.1]%, while the fuel near the Zr–fuel interface swelled by 63.3[+14.7/-7.2]%. The average local thickness of the Zr diffusion barrier decreased by 53%, compared to the expected pre-irradiated thickness. Four pore morphology regions were identified initiating parallel to the fuel–Zr interaction region: (1) an interaction layer of suppressed porosity, (2) a layer of elongated and interconnected porosity, (3) a transition zone of low porosity, and (4) a layer of unoriented porosity representative of the bulk fuel behavior. The increase in porosity near the diffusion barrier corresponded to a higher U concentration compared to that in the bulk fuel. The interconnected porosity in the fuel near the diffusion barrier was extensive and oriented parallel to the diffusion barrier, while the bulk fuel had more compact and isolated pore networks. The interaction layer, despite having suppressed porosity, was nearly 100 wt.% U. Porosity suppression at the diffusion barrier corresponds to the expected reduction in radiation-driven diffusion of Xe at the interface despite the anticipated increase in fission product nucleation originating from a higher U concentration. The novel 3D insights of the porosity, swelling, and compositional variations characterized herein can improve the fidelity of fuel performance codes for proliferation-resistant fuels for research and test reactors.

Manufacturing high-uranium-loaded dispersion fuel plates in Brazil

U-Si and U-Si-Ai Dispersion Fuel Alloy Development for Research and Test Reactors

Assessment of the IEA-R1 nuclear reactor using a nonstandard fuel assembly with six fuel plates of the Brazilian Multipurpose Reactor

A European manufacturing line for monolithic U–Mo bare foil production

Investigation of Plasma-Chemical Synthesis of Complex Oxide Compositions for Dispersed Uranium-Plutonium Mixed Fuel

Research and Manufacture of Spherical Fuel Element for HTR-PM Demonstration Project

Synchrotron Micro-Computed Tomography Analysis of Neutron-Irradiated U-Mo Fuel

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

Manufacturing porous U-10Zr metallic fuels with controllable microstructure by volume control spark plasma sintering

Fuel cycles with advanced dispersion fuel elements of high uranium density

Conceptual design and analysis of a new plate-type fuel element for flattening of reactor power distribution

Characterization of U–Nb–Zr dispersion fuel prepared by centrifugal atomization process

Production of Pa-U Fuel with Proliferation Resistance by 14 MeV Neutron for Long-life Core

Mechanical Characterizations of the Dispersion U 3 Si 2 -Al Fuel Plate with Sandwich Structure

Thermo-mechanical Behavior Simulation Coupled with the Hydrostatic-Pressure-dependent Grain-Scale Fission Gas Swelling Calculation for a Monolithic UMo Fuel Plate under Heterogeneous Neutron Irradiation

The irradiation behavior of atomized U-Mo alloy fuels at high temperature

Pie of the 2 irradiation test (komo-2) for the atomized u- mo dispersion rod fuels at kaeri

Design of Mini-Plate-1 Irradiation Test for Qualification of High-Density, Low-Enriched U-10Mo Monolithic Fuel

Neutronic Design and Evaluation of the Solid Microencapsulated Fuel in LWR

Contributions to the mechanistic understanding of the microstructural evolution in irradiated U-Mo dispersion fuel

Experiments, characterizations and analysis of a U3Si2–Al dispersion fuel plate with sandwich structure