Abstract:Due to its cost-effectiveness and high specific capacity, P2-type manganese (Mn) oxide is considered a highly promising cathode material for sodium ion batteries (SIBs). However, the practical application of this material is hindered by poor cyclic stability caused by the phase transition of P2-P'2 due to the Jahn-Teller effect of Mn 3+ at low voltage and significant volume changes at high voltage. In this study, we utilized Mo 6+ dual-function P2-Na 0.67 Mn 0.99 Mo 0.01 O 1.997 (PO 4 ) 0.0008 (NMMPO-1) to achieve exceptional magnification performance and cycle stability. Advanced electron microscopy and X-ray diffraction analysis revealed that Mo 6+ acts as a pillar in replacing interlayer Na + sites within the P2 phase, resulting in extended layer spacing and a stable crystal structure. Additionally, Mo 6+ substitution for Mn 3+ weakens the Jahn-Teller distortion effect of Mn 3+ . Ex-situ X-ray diffraction experiments demonstrated that NMMPO-1 effectively inhibits the P2-P'2 phase transition at low voltage while minimizing volume changes during charge–discharge cycles. Overall, our modified NMMPO-1 exhibits excellent cycle stability with 144.55 mA h g −1 after 100 cycles at 0.5C, retaining 83 % capacity retention rate, along with impressive rate performance achieving capacity of 100.57 mA h g −1 at 5C. Furthermore, NMMPO-1 demonstrates superior air stability compared to unmodified samples when exposed to air over multiple cycles. Moreover, through detailed analysis using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and galvanostatic intermittent titration technique (GITT) curves; it is observed that NMMPO-1 possesses enhanced Na + diffusion capacity and kinetic properties compared to other materials. This research provides novel insights into the role of substituting high valence cations in layered Mn oxide materials which can contribute towards designing improved performance for future sodium ion battery applications.

Manganese Local Environment Modulation Via SiO4 Substitution to Boost Sodium Storage Performance of Na4 MnCr(PO4 )3.

Enhancing the Sodium Storage Performance of Na 4 MnCr(PO 4 ) 3 through the Manipulation of Intrinsic Site Occupation Defects

Mechanisms of Ionic Diffusion and Stability of the Na4MnCr(PO4)3 Cathode

Mo6+ Bifunctional Substitution of P2-type Manganese Oxide for High Performance Sodium-Ion Batteries

Mo 6+ bifunctional substitution of P2-type manganese oxide for high performance sodium-ion batteries

Stabilizing NASICON-type Na4MnCr(PO4)3 by Ti-substitution toward a high-voltage cathode material for sodium ion batteries

A Multiphase Coupling Strategy to Structurally Stable Manganese-Based Oxides Cathode for High Electrochemical Performance Sodium Ion Batteries

Stabilized Multi-Electron Reactions in a High-Energy Na4 Mn0.9 CrMg0.1 (PO4 )3 Sodium-Storage Cathode Enabled by the Pinning Effect.

A Strategy to Mitigate Jahn Teller Effect of Mn‐Rich NASICON Framework for Sodium‐Ion Batteries

Na-site coordination environment regulation of Mn-based phosphate cathodes for sodium-ion batteries with elevated working voltage and energy density

Synergetic Anion-Cation Co-doping in Na 0.44 MnO 2 Boosting a High-Stability and Improved-Kinetics Cathode for Sodium Ion Battery

Cation/Anion-Dual regulation in Na3MnTi(PO4)3 cathode achieves the enhanced electrochemical properties of Sodium-Ion batteries

Anion Substitution to Suppress the Voltage Hysteresis of Na 3 MnTi(PO 4 ) 3 as a Cathode Material for Sodium-Ion Batteries

Functional surface modification of P2-type layered Mn-based oxide cathode by thin layer of NASICON for sodium-ion batteries

Regulations of Bulk and Interfacial Chemistry of Mn-Based Cathode Materials for Sodium Ion Batteries

Sulfur-bridged bonds enabled structure modulation and space confinement of MnS for superior sodium-ion capacitors

Simultaneously Enhancing Structural Stability and Cationic Redox in Na<sub>0.67</sub>Mn<sub>0.75</sub>Fe<sub>0.25</sub>O<sub>2</sub> through a Synergy of Multisite Substitution

Dual-directional electronic modulation of manganese oxides enabled by heterostructures for efficient sodium ion storage

Multivalent Manganese-Based Composite Materials for Sodium Energy Storage in Ether Electrolyte

A Mn-based ternary NASICON-type Na3.5MnTi0.5Cr0.5(PO4)3/C cathode for high-performance sodium-ion batteries

Synergistic Strain Suppressing and Interface Engineering in Na 4 MnV(PO 4 ) 3 /C for Wide-Temperature and Long-Calendar-Life Sodium-Ion Storage