Abstract:To mitigate the shuttle effect of Li–S batteries, a hollow microflower Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The H‐Mo2C/MoO2/nitrogen‐doped carbon/S cathode with the high‐sulfur loading of 6.2 mg cm−2 and a low‐electrolyte/sulfur ratio of at 1C, where the cell exhibits an excellent cycling stability, maintains a capacity of 308 mAh g−1 after 500 cycles. Lithium–sulfur batteries (Li–S batteries) have a high theoretical capacity density. However, due to the solubility of long‐chain polysulfides migration between the positive and negative electrodes driven by concentration gradients, the cycle stability of lithium–sulfur batteries is compromised, hindering their practical application. To mitigate the shuttle effect and enhance the electrochemical performance of Li–S batteries, a hollow microflower (MF) Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The presence of a hetero‐interface improves the electrical conduction rate, facilitating more effective charge transfer at the interface between heterogeneous components. Additionally, the increased catalytic active sites enhance the conversion of polysulfides and promote the catalytic capability. As a result, Li–S batteries with H‐Mo2C/MoO2/nitrogen‐doped carbon MFs as additives in the cathode exhibit excellent rate performance and good cycling stability. After 100 cycles at 0.2C, the capacity remains at 1071.6 mAh g−1, with a capacity retention rate of 90.6%. Notably, the Li–S batteries demonstrate a capacity decay of only 0.011% per cycle over 1000 cycles at 1C, with a specific capacity of 790 mAh g−1 retained after the cycling process. In this work, a rational approach is provided to fabricating transition‐metal carbon‐oxide heterostructures with an optimized structure to enhance the performance of Li–S batteries.

Efficient Regulation of Polysulfides by MoS2 /moo3 Heterostructures for High-Performance Li-S Batteries.

Suppress Loss of Polysulfides in Lithium-Sulfur Battery by Regulating the Rate-Determining Step Via 1T MoS2-MnO2 Covering Layer.

Multifunctional Heterostructures for Polysulfide Suppression in High-Performance Lithium-Sulfur Cathode.

Facile Synthesis of Heterostructured MoS2-MoO3 Nanosheets with Active Electrocatalytic Sites for High-Performance Lithium-Sulfur Batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Facile Synthesis of Heterostructured MoS 2 –MoO 3 Nanosheets with Active Electrocatalytic Sites for High-Performance Lithium–Sulfur Batteries

Synergistic Polysulfides Adsorption–Conversion with Mo2C–MoO2 Heterostructure for Kinetically Enhanced Lithium–Sulfur Battery

Regulating Electrocatalytic Polysulfides Redox Kinetics through Manipulating Surface Electronic Structure of Molybdenum-Based Catalysts for High-Performance Lithium-Sulfur Batteries

Heterostructure Mo2C/α-MoO3/G Catalyst Based Heterogeneous Catalysis/deposition Mechanism for High-Performance Li-S Battery

Advanced Separator Enabled by Sulfur Defect Engineering for High-Performance Lithium–Sulfur Batteries

Polysulfides Shuttling Remedies by Interface-Catalytic Effect of Mn3o4-Mnpx Heterostructure

Constructing MoS 2 -SnS heterostructures on N-doped carbon nanosheets for enhanced catalytic conversion of polysulfides in lithium-sulfur batteries

Insight into MoS2–MoN Heterostructure to Accelerate Polysulfide Conversion Toward High‐Energy‐Density Lithium–Sulfur Batteries

Highly Dispersed Conductive and Electrocatalytic Mediators Enabling Rapid Polysulfides Conversion for Lithium Sulfur Batteries

Enhanced Chemical Immobilization and Catalytic Conversion of Polysulfide Intermediates Using Metallic Mo Nanoclusters for High-Performance Li-S Batteries.

1T-rich MoS 2 nanosheets anchored on conductive porous carbon as effective polysulfide promoters for lithium–sulfur batteries

Regulating Polysulfide Transformation and Stabilizing Lithium Anode Using [PMo 12 O 40 ] 3− Cluster@Carbon Nanotube‐Modified Separator for Lithium‐Sulfur Batteries

Rational design of hollow flower-like MoS2/Mo2C heterostructures in N-doped carbon substrate for synergistically accelerating adsorption-electrocatalysis of polysulfides in lithium sulfur batteries

MoS 2 @SiO 2 heterostructures modified separator utilized for efficient adsorption and rapid conversion of polysulfides

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Insight into MoS 2 –MoN Heterostructure to Accelerate Polysulfide Conversion toward High‐Energy‐Density Lithium–Sulfur Batteries