Abstract:Abstract Purpose Radioactive seed implantation is an effective invasive treatment method for malignant liver tumors in hepatocellular carcinomas. However, challenges of the manual procedure may degrade the efficacy of the technique, such as the high accuracy requirement and radiation exposure to the surgeons. This paper aims to develop a robotic system and its control methods for assisting surgeons on the treatment. Method We present an interventional robotic system, which consists of a 5 Degree-of-Freedom (DoF) positioning robotic arm (a 3-DoF translational joint and a 2-DoF revolute joint) and a needle actuator used for needle insertion and radioactive seeds implantation. Control strategy is designed for the system to ensure the safety of the motion. In the designed framework, an artificial potential field (APF)-based motion planning and an ultrasound (US) image-based contacting methods are proposed for the control. Result Experiments were performed to evaluate position and orientation accuracy as well as validate the motion planning procedure of the system. The mean and standard deviation of targeting error is 0.69 mm and 0.33 mm, respectively. Needle placement accuracy is 1.10 mm by mean. The feasibility of the control strategy, including path planning and the contacting methods, is demonstrated by simulation and experiments based on an abdominal phantom. Conclusion This paper presents a robotic system with force and US image feedback in assisting surgeons performing brachytherapy on liver tumors. The proposed robotic system is capable of executing an accurate needle insertion task with by optical tracking. The proposed methods improve the safety of the robot’s motion and automate the process of US probe contacting under the feedback of US-image.

Neutron Source Installation Operation with 7-DOF Manipulator Based on Active Compliance Control

An ANN-Based Precision Compensation Method for Industrial Manipulators Via Optimization of Point Selection

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

An adaptive compliance position control based on EKF for series elastic actuation

Moving Obstacle Avoidance for Redundant Manipulator Via Weighted Least Norm Method

Atomic Force Microscope-Based Nanomanipulation with Drift Compensation

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Adaptive critic neural network force controller for atomic force microscope-based nanomanipulation

Study on a master-slave underwater manipulatorfor nuclear power plant servicing

Design and Analysis of 7-DOF Cable-Driven Manipulator

Design of gearing chain-based manipulator for post-processing

Design and Control of an Ultra-Slender Push-Pull Multisection Continuum Manipulator for In-Situ Inspection of Aeroengine

Assessing tele-manipulation systems using task performance for glovebox operations

A novel multi-DoF surgical robotic system for brachytherapy on liver tumor: Design and control

Design and Experimental Study of a Novel 7-DOF Manipulator for Transrectal Ultrasound Probe

Remote Handling Crane System for Use in Small Argon Compartment Hot-cell

Experimental Validation Of Manipulability Optimization Control Of A 7-Dof Serial Manipulator For Robot-Assisted Surgery

Gravity Compensation Method of Hanging Master-slave Telemanipulator

A Novel Posture Positioning Method for Multi-Joint Manipulators

Manipulability Optimization Control of a Serial Redundant Robot for Robot-assisted Minimally Invasive Surgery

The structure design and kinematics analysis of the manipulator for the upper port remote maintenance in DEMO