Abstract:Although salt hydrate is characterized as a potential energy storage material, some of its disadvantages still can be encountered, such as mismatched phase change temperature, low thermal conductivity, phase separation, and large supercooling. In this paper, a novel composite phase change material (CPCM) with sodium acetate trihydrate (SAT) as the main body is fabricated by melting blending for heat pump system. Potassium chloride (KCl) is used as a modification agent to modulate the SAT phase change temperature. Carboxyl methyl cellulose (CMC) and disodium phosphate dodecahydrate (DSP) are employed as thickening and nucleating agents to address the phase separation and supercooling issues, respectively. Expanded graphite (EG) is utilized as a high heat conduction additive to enhance the thermal conductivity. Furthermore, the thermal properties and stability of the novel CPCM are studied. In order to identify the thermal properties of the novel CPCM, a high energy density coil-type latent heat thermal energy storage (LHTES) unit employing the CPCM as energy storage material is set up, while a cycle of thermal charge and release in the unit between heating at 70 °C and cooling at 30 °C is designed to accommodate a scenario of residential heating. The experimental and numerical results indicate that the modified SAT yielded the desired phase change temperature of 49.3 °C, high latent heat of 224.6 kJ/kg, low supercooling degree of 0.96 °C and high thermal conductivity of 0.981 W/(m·K) are recognized when a minor ingredient with 8 wt% KCl, 4 wt% CMC, 4 wt% DSP and 3 wt% EG in the melting blend is prepared. Besides, the novel CPCM also exhibits good thermal stability with a latent heat loss of 7.14 % and supercooling degree remaining within 5 °C after 200 cycles. Moreover, the heat storage density of the LHTES unit employing the novel CPCM is up to 385.93 kJ/L, and its heat charge and release efficiency reaches to 91.39 %. Further, the average heat storage and release power of the proposed LHTES unit shows an increasing trend with a higher flow rate within a certain range. The findings of this study can provide a guidance for the large-scale thermal energy storage applications of SAT.

Phase Change Temperature Adjustment of CH3COONa·3H2O to Fabricate Composite Phase Change Material for Radiant Floor Heating

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

A Sodium Acetate Trihydrate-Formamide/expanded Perlite Composite with High Latent Heat and Suitable Phase Change Temperatures for Use in Building Roof

Development of diatomite-based shape-stabilized composite phase change material for use in floor radiant heating

Modified sodium acetate trihydrate/expanded perlite composite phase change material encapsulated by epoxy resin for radiant floor heating

Thermal Performance of Industrial-Grade CH3COONa·3H2O-based Composite Phase Change Materials in a Plate Heat Storage Unit

Preparation and characterizations of a novel temperature-tuned phase change material based on sodium acetate trihydrate for improved performance of heat pump systems

Preparation and Application of Paraffin/Expanded Graphite-Based Phase Change Material Floor for Solar-Heat Pump Combined Radiant Heating Systems

Thermal Property Enhancement of a Novel Shape-Stabilized Sodium Acetate Trihydrate-Acetamide/Expanded Graphite-Based Composite Phase Change Material

An innovative modified calcium chloride hexahydrate–based composite phase change material for thermal energy storage and indoor temperature regulation

Preparation and thermal performance enhancement of sodium thiosulfate pentahydrate- sodium acetate trihydrate /expanded graphite phase change energy storage composites

Design and analysis of phase change material based floor heating system for thermal energy storage

Preparation and Characteristics of Na2HPO4·12H2O-K2HPO4·3H2O/SiO2 Composite Phase Change Materials for Thermal Energy Storage

Development and thermal properties of a novel sodium acetate trihydrate-Acetamide-micron/nano aluminum nitride composite phase change material

Optimization of supercooling, thermal conductivity, photothermal conversion, and phase change temperature of sodium acetate trihydrate for thermal energy storage applications

Sodium acetate trihydrate-based composite phase change material with enhanced thermal performance for energy storage

Preparation, thermal storage properties and application of sodium acetate trihydrate/expanded graphite composite phase change materials

Tailoring Thermal Properties Via Synergistic Effect in a Multifunctional Phase Change Composite Based on Methyl Stearate

Preparation of a novel sodium acetate trihydrate-based composite phase change material and thermal performance of its integration in a coil-type thermal energy storage unit for heat pump system

Intermittent Exothermic and Self‐Healing Hydrated Salt Gels for Advanced Thermal Management of Underfloor Radiant Heating System

A shape-stabilized MgCl2·6H2O–Mg(NO3)2·6H2O/expanded graphite composite phase change material with high thermal conductivity and stability