Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Cooperative Consensus Control of Two Semi-Submersible Platforms Connected by a Telescopic Gangway

Robust Dynamic Positioning of Autonomous Surface Vessels with Tube-Based Model Predictive Control

Nonlinear Control for an Active-passive Hybrid Compensation System

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Disturbance Observer-Based Nonlinear Motion Control of the Parallel Platform for Wave Compensation

A Pressure-Displacement Control for an Active-Passive Hybrid Compensation System

State Constrained Variable Structure Control for Active Heave Compensators.

Control Strategy for Performing Predictions for a Semi-Active Compensation System

Nonlinear control of active heave compensator for an underwater towed system

Modeling and controller design of an offshore wind service operation vessel with parallel active motion compensated gangway

Dynamic Gangway Responses Between TLP and Semi-Submersible Platform During Tender-Assisted Drilling

Coupled dynamics between a turret-moored FPSO and a semi-submersible accommodation platform

Dynamic Response Of A Gangway Between Two Floating Bodies In A Side-By-Side Configuration

Dynamic simulation and adaptive heave compensation control of a wave-compensated gangway under random wave excitation

Dynamics Modeling and Modal Space Control Strategy of Ship-Borne Stewart Platform for Wave Compensation

Coupled Control of the Horizontal and Vertical Plane Motions of a Semi-Submersible Platform by a Dynamic Positioning System

Synchronize the Parafoil and the Vessel: A Hierarchical Distributed Nonlinear Model Predictive Control Approach

Fully Coupled Time-Domain Simulation of Dynamic Positioning Semi-Submersible Platform Using Dynamic Surface Control

Safety-critical anti-disturbance control of tugs for collaborative berthing

Control System Design for Offshore Floating Platform Transportation by Combination of Towing and Pushing Tugboats

Motion mitigation of hinged floating structures by adaptive control