Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Control System Design for Offshore Floating Platform Transportation by Combination of Towing and Pushing Tugboats

A Pressure-Displacement Control for an Active-Passive Hybrid Compensation System

Robust Dynamic Positioning of Autonomous Surface Vessels with Tube-Based Model Predictive Control

Disturbance Observer-Based Nonlinear Motion Control of the Parallel Platform for Wave Compensation

Dynamic Response of DP Offshore Platform-Riser Multi-Body System Based on UKF-PID Control

Nonlinear control of active heave compensator for an underwater towed system

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

State Constrained Variable Structure Control for Active Heave Compensators.

Nonlinear Control for an Active-passive Hybrid Compensation System

PREDICTIVE ROBUST CONTROL BASED ON HIGHER-ORDER SLIDING MODE FOR PASSIVE HEAVE COMPENSATOR WITH HYDRAULIC TRANSFORMER

Nonlinear Stochastic Optimal Control of Offshore Platforms under Wave Loading

Intelligent towing and pushing system for unmanned tugboats under wind and wave disturbances

Safety-critical anti-disturbance control of tugs for collaborative berthing

Fuzzy-based adaptive control method for automatic mooring systems

Path Following Control for Towing System of Cylindrical Drilling Platform in Presence of Disturbances and Uncertainties.

Finite-time adaptive anti-disturbance constrained control design for dynamic positioning of marine vessels with simulation and model-scale tests

Adaptive Robust Dual-Loop Control Scheme of Ship-Mounted Stewart Platforms for Wave Compensation

Sliding-mode control of ship-mounted Stewart platforms for wave compensation using velocity feedforward

An intelligent course keeping active disturbance rejection controller based on double deep Q‐network for towing system of unpowered cylindrical drilling platform

Adaptive Control for Marine Vessels Against Harsh Environmental Variation

Advanced control for fault-tolerant dynamic positioning of an offshore supply vessel