Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Intelligent towing and pushing system for unmanned tugboats under wind and wave disturbances

Robust Dynamic Positioning of Autonomous Surface Vessels with Tube-Based Model Predictive Control

Dynamic Analysis of Towed Cable with Variable Length During Turning Maneuvers

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

A Pressure-Displacement Control for an Active-Passive Hybrid Compensation System

Nonlinear control of active heave compensator for an underwater towed system

Control System Design for Offshore Floating Platform Transportation by Combination of Towing and Pushing Tugboats

Safety-critical anti-disturbance control of tugs for collaborative berthing

Modeling and Robust Quantitative Control for AUV-tow-load System

Dynamic Analysis of an Underwater Cable-Driven Manipulator with a Fluid-Power Buoyancy Regulation System

An intelligent course keeping active disturbance rejection controller based on double deep Q‐network for towing system of unpowered cylindrical drilling platform

Collision Avoidance and Path Point Tracking Control for Underactuated Unmanned Surface Vehicles with Unknown Model Nonlinearity

Path Following Control for Towing System of Cylindrical Drilling Platform in Presence of Disturbances and Uncertainties.

Hydrodynamic response on trajectory tracking of a tethered underwater robot system under hybrid control algorithms of umbilical cable and propellers

Modeling and adaptive controlling of cable‐drogue docking system for autonomous underwater vehicles

Speed and heading control-based collision avoidance for a ship towing system

Marine Locomotion: A Tethered UAV$-$Buoy System with Surge Velocity Control

A Tethered Quadrotor UAV$-$Buoy System for Marine Locomotion

Collision prevention of ship towing operation under environmental disturbance

Autonomous docking trajectory optimization for unmanned surface vehicle: A hierarchical method

Dynamics Modeling and Motion Control of an New Unmanned Underwater Vehicle