Abstract:The current investigation involved the development of activated carbon, juglans regia activated carbon (JRACs), from walnut shells, scientifically known as Juglans regia . The ZnO nanorods were loaded on the activated carbon and referred to as ZnO@JRACs. Desulfurization efficiency was assessed through batch adsorption and compared to commercial activated carbon known as DARCO. The materials were characterized using PXRD (powder X-ray diffraction), FTIR (Fourier-transform infrared spectroscopy), ICP-AES (inductively coupled plasma atomic emission spectroscopy), BET (Brunauer–Emmett–Teller) surface area analysis, TEM (transmission electron microscopy) imaging, and TGA (thermal gravimetric analysis). The findings indicated that the materials have oxygen functionalities, a porous morphology, and a substantial specific surface area (BET) of 1269.92 m 2 /g for ZnO@JRACs. Zn atom concentration in the ZnO@JRACs surface was determined to be 1.16 atomic percent using ICP-AES. Desulfurization experiments were conducted on three liquid fuels, namely a single component model fuel, MSF (multicomponent simulated fuel), and commercial fuel (kerosene), under optimized conditions (8 g/L adsorbent dosage in 10 mL of fuel, 15 min of contact time at room temperature). The conditions effectively removed ~ 98.9% of dibenzothiophene (DBT) from the single component model fuel. The observed order for adsorption capacity is as follows: ZnO@JRACs (63.6 mg g −1 ) > JRACs (46.3 mg g −1 ) > DARCO (26.1 mg g −1 ). The analysis of multicomponent simulated fuel (MSF) using gas chromatography-flame photometric detector (GC-FPD) revealed significant removal percentages for different types of thiophenic sulfur. Specifically, the removal percentages were ~ 46.2%, 97.6%, and 99.4% for benzothiophene, dibenzothiophene, and 4, 6-dimethyldibenzothiophene, respectively. Kinetic studies have shown that the adsorption process is governed by a pseudo second-order reaction. Additional thermodynamic studies were conducted to further investigate the mechanism of adsorption. The spent synthesized composite ZnO@JRACs were thermally regenerated and can be reused for up to four cycles.

Green adsorption of quinoline as basic N-compounds from liquid fuel using mesoporous and Fe-functionalized walnut shell-activated carbon

Fe-functionalized walnut shell–activated carbon for the facile desulfurization of liquid fuels

Desulfurization of simulated and commercial liquid fuel on nano-ZnO fabricated walnut shells

Efficient removal of both basic and non-basic nitrogen compounds from fuels by deep eutectic solvents

Ultrasound-assisted adsorption approach for desulfurization of n-heptane using nitrogen-doped magnetic carbon dot nanocomposite

A simultaneous study on desulphurization and denitrogenation using acid‐treated activated alumina: Multi‐component adsorption systems

Fabrication of Nitrogen-Doped Porous Carbons Derived from Ammoniated Copolymer Precursor: Record-high Adsorption Capacity for Indole

Green and low-cost deep eutectic solvents for efficient extraction of basic and non-basic nitrides in simulated oils

Adsorptive Denitrogenation of Fuel over Metal Organic Frameworks: Effect of N-Types and Adsorption Mechanisms

Study of Phenol and Nicotine Adsorption on Nitrogen-Modified Mesoporous Carbons

Enhanced VOCs adsorption with UIO-66-porous carbon nanohybrid from mesquite grain: A combined experimental and computational study

Application of powdered activated carbon coated with zinc oxide nanoparticles prepared using a green synthesis in removal of Reactive Blue 19 and Reactive Black-5: adsorption isotherm and kinetic models

The introduction of nitrogen-containing heterocyclic compounds (NHC) and Cu 2+ in Co-MOF further improves the removal of dibenzothiophene from model fuels

The synthesis of biochar-supported nano zero-valent iron composite and its adsorption performance in removal of malachite green

Adsorption of nitrophenol onto a novel Fe3O4-κ-carrageenan/MIL-125(Ti) composite: process optimization, isotherms, kinetics, and mechanism

Optimal Design Of An Imprinted Preassembled System By Quantum Chemical Calculations And Preparation Of A Surface-Imprinted Material For The Selective Removal Of Quinoline

Kinetic and thermodynamic study of the removal of acid black 234 and acid brown 113 dyes from aqueous solution using a low-cost synthesized activated carbon supported iron oxide (AC/Fe2O3) nanocomposites

N-N self-inhibition effect of aromatic N-heterocyclic compounds on NiWS supported γ-Al 2 O 3 hydrotreating catalyst

Synergic Adsorption-Biodegradation by an Advanced Carrier for Enhanced Removal of High-Strength Nitrogen and Refractory Organics.

Experimental, isotherm, kinetic and thermodynamic studies of the novel modified zeolite ZSM-5 adsorbent for use in clean fuel processing

ZIF-8 derived porous carbon/ZnO as an effective nanocomposite adsorbent for removal of acetic acid