Abstract:A thermodynamic model for calculating the sulfur distribution ratio between ladle furnace (LF) refining slags and molten steel has been developed by coupling with a developed thermodynamic model for calculating the mass action concentrations of structural units in LF refining slags, i.e., CaO–SiO2–MgO–FeO–MnO–Al2O3 hexabasic slags, based on the ion and molecule coexistence theory (IMCT). The calculated mass action concentrations of structural units in CaO–SiO2–MgO–FeO–Al2O3–MnO slags equilibrated or reacted with molten steel show that the calculated equilibrium mole numbers or mass action concentrations of structural units or ion couples, rather than mass percentage of components, in the slags can represent their reaction abilities. The calculated total sulfur distribution ratio shows a reliable agreement with the measured or the calculated sulfur distribution ratio between the slags and molten steel by other models under the condition of choosing oxygen activity based on (FeO)–[O] equilibrium. Meanwhile, the developed thermodynamic model for calculating sulfur distribution ratio can quantitatively determine the respective contribution of free CaO, MgO, FeO, and MnO in the LF refining slags. A significant difference of desulfurization ability among free component as CaO, MgO, FeO, and MnO has been found with approximately 87–93 pct, 11.43–5.85 pct, 0.81–0.60 pct and 0.30–0.27 pct at both middle and final stages during LF refining process, respectively. A large difference of oxygen activity is found in molten steel at the slag–metal interface and in bulk molten steel. The oxygen activity in molten steel at the slag–metal interface is controlled by (FeO)–[O] equilibrium, whereas the oxygen activity in bulk molten steel is controlled by [Al]–[O] equilibrium. Decreasing the high-oxygen-activity boundary layer beneath the slag–metal interface can promote the desulfurization reaction rate effectively or shorten the refining period during the LF refining process.

Analysis of Antimony Sulfide Oxidation Mechanism in Oxygen-Enriched Smelting Furnace

Phase Evolution and Recovery Rate of Sb in Lead–Silver Slag Treated via Melting–Fuming Method

Thermodynamic simulation of complex Pb−Bi concentrate oxidative bath smelting process

Mechanism study on the sulfidation of ZnO with sulfur and iron oxide at high temperature

Oxidative dissolution of Sb2O3 mediated by surface Mn redox cycling in oxic aquatic systems

Sustainable phase-conversion method for antimony extraction and sulfur conservation and waste treatment at low temperature

Preparation of Antimony Metal by Carbothermal Reduction of Antimony Oxide Powder in a Microwave Field: Mechanism and Process

Cleaning of high antimony smelting slag from an oxygen-enriched bottom-blown by direct reduction

Reduction mechanism and optimization of prepare metallic antimony through direct microwave carbothermal reduction of antimony oxide concentrate

Behavior of Sulfur Oxides in Nonferrous Metal Smelters and Implications on Future Control and Emission Estimation.

Novel Insights into Sb(III) Oxidation and Immobilization during Ferrous Iron Oxygenation: The Overlooked Roles of Singlet Oxygen and Fe (oxyhydr)oxides Formation

Abiotic aerobic oxidation pathways of stibnite revealed by oxygen and sulfur isotope systematics of sulfate

Application of thermal analysis techniques to study the oxidation/reduction phenomena during sintering of steels containing oxygen-sensitive alloying elements

Thermodynamic Nature of SiO2 and FeO in Flux O Potential Control Subject to Submerged Arc Welding Process

A Thermodynamic Model of Sulfur Distribution Ratio Between CaO–SiO2–MgO–FeO–MnO–Al2O3 Slags and Molten Steel During LF Refining Process Based on the Ion and Molecule Coexistence Theory

Reaction behavior of sulfides in blast furnace raw materials under hydrogen-rich reducing atmosphere

Thermodynamics Evaluation and Verification of High-Sulfur Copper Slag Composite Agglomerate in Oxidation-Roasting-Separation-Leaching Process

Influence of B2O3 on the Thermophysical Properties of Molten Blast Furnace Slag

Effect of Sulfur on Antimony-Induced High-Temperature Ductility Deterioration of C-Mn Steel

Thermogrvimetric Experiment and Kinetic Analysis on the Oxidation of Ferrous Sulfide

Impact of Controlled Thermal Oxidation on Phase Transition and Tailoring Properties of Sb2S3/Sb2O3 Composites