Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

Synchronously Constructing Networked Si3N4 Nanowires and Interconnected Graphene Inside Carbon Fiber Composites for Enhancing Mechanical, Friction and Anti-Ablation Properties

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

SiC Nanowire–Si 3 N 4 Nanobelt Interlocking Interfacial Enhancement of Carbon Fiber Composites with Boosting Mechanical and Frictional Properties

Synchronously promoted mechanical and biotribological properties of carbon fiber composites by constructing Si3N4 nanowires@pyrolytic carbon intertwined network

Si3N4 nanowires@pyrolytic carbon nanolayers coupled with hydroxyapatite nanosheets as reinforcement for carbon matrix composites with boosting mechanical and friction properties

Construction of cellulose nanofiber/carbon nanotube synergistic network on carbon fiber surface to enhance mechanical properties and thermal conductivity of composites

Constructing orthogonally structured graphene nanointerface on SiC nanowires reinforced carbon/carbon composites to boost mechanical strength and strength retention rate

Mechanical properties and wear resistance of Cf / epoxy resin composites with in-situ grown SiC nanowires on carbon fibers

Elevating mechanical and biotribological properties of carbon fiber composites by constructing graphene-silicon nitride nanowires interlocking interfacial enhancement

Construction of 3D nanostructures on carbon fiber surfaces by sizing for preparing high‐performance composites

Interface design of carbon fiber composites by fabricating interlocked carbon nanotubes-silicon nitride nanowires

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Strong and Tough Multilayer Heterogeneous Pyrocarbon Based Composites

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

Multiscale enhancement of carbon/carbon composite performance by self-assembly of sulfonated graphene with silane-treated carbon fibers

Simultaneous optimization of mechanical and biotribological properties of carbon fibers reinforced hydroxyapatite-polymer composites by constructing networked Si 3 N 4 nanowires

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Epitaxial Grown Carbon Nanotubes Reinforced Pyrocarbon Matrix in C/C Composites with Improved Mechanical Properties

Functional performance evolution of urchin‐like structured SiO 2 ‐carbon nanotube hybrid constructions reinforcing polyethylene‐based composites

Improved Mechanical Properties of Graphene/Carbon Fiber Composites via Silanization