Abstract:In the present work, the gasification performances of two pairs of raw and torrefied biomasses, including raw forest residue and torrefied forest residue, and raw spruce and torrefied spruce in a high-temperature entrained-flow reactor, are numerically examined and compared to each other using a Eulerian-Lagrangian CFD model developed based on OpenFOAM. Moreover, the sensitivities of three important operating parameters (excess air ratio, steam/carbon molar ratio, and biomass particle diameter), which vary in the range of practical significance, are also tested. The calculated results are analyzed both qualitatively and quantitatively by five indicators: isothermal profiles, char consumption rate, gas compositions, species yield, and carbon conversion along the reactor length. The obtained results show that torrefied biomass can increase the maximum temperature in the reactor as compared to its raw parent fuel. During gasification, CO, H-2, and CO2 are the major species in the product gas and CH4 accounts for only a very small fraction of the syngas at such a high operating temperature of 1400 degrees C. As expected, the higher the excess air ratio, the lower the H-2 yield and higher CO2 production and carbon conversion; a rise in the steam/carbon molar ratio promotes the H-2 yield but reduces the CO production; and both the H-2 and CO yields and carbon conversion decrease with increasing particle diameter. In addition, three reaction zones can be recognized from the carbon conversion along the reactor length, and such information is useful for optimal reactor design. In all cases, torrefaction consistently reduces both the H-2 production and carbon conversion as compared to its raw biomass under the same operating conditions, which suggests that torrefied biomass requires a bigger length entrained-flow gasifier or longer particle residence time to achieve the same level of conversion as that for its raw biomass.

Application of Random Forest Model Integrated with Feature Reduction for Biomass Torrefaction

Application of Random Forest Machine Learning Models to Forecast Combustion Profile Parameters of a Natural Gas Spark Ignition Engine

Rapid Determination of Componential Contents and Calorific Value of Selected Agricultural Biomass Feedstocks Using Spectroscopic Technology

Prediction of Fuel Properties of Torrefied Biomass Based on Back Propagation Neural Network Hybridized with Genetic Algorithm Optimization

Influence of Torrefaction on Biomass Gasification Performance in A High-Temperature Entrained-Flow Reactor

Estimating Biomass Major Chemical Constituents from Ultimate Analysis Using a Random Forest Model

Machine Learning Prediction of Pyrolytic Gas Yield and Compositions with Feature Reduction Methods: Effects of Pyrolysis Conditions and Biomass Characteristics

Predictive Single-Step Kinetic Model of Biomass Devolatilization for CFD Applications: A Comparison Study of Empirical Correlations (EC), Artificial Neural Networks (ANN) and Random Forest (RF)

A comparative analysis of biomass torrefaction severity index prediction from machine learning

Machine learning models for predicting biochar properties from lignocellulosic biomass torrefaction

Enhancing pyrolysis process monitoring and prediction for biomass: A machine learning approach

Random Forest Model for Predicting Kinetic Parameters of Biomass Devolatilization

Prediction of holocellulose and lignin content of pulp wood feedstock using near infrared spectroscopy and variable selection

Insight into lignocellulosic biomass torrefaction kinetics with case study of pinewood sawdust torrefaction

Machine Learning Prediction of Fuel Properties of Hydrochar from Co-Hydrothermal Carbonization of Sewage Sludge and Lignocellulosic Biomass

Thermogravimetric Experiments Based Prediction of Biomass Pyrolysis Behavior: A Comparison of Typical Machine Learning Regression Models in Scikit-learn

Insight into Torrefaction of Woody Biomass: Kinetic Modeling Using Pattern Search Method

Machine learning and statistical analysis for biomass torrefaction: A review

Machine learning prediction of the yield and oxygen content of bio-oil via biomass characteristics and pyrolysis conditions

Oxytree Pruned Biomass Torrefaction: Mathematical Models of the Influence of Temperature and Residence Time on Fuel Properties Improvement

Predicting the higher heating value of products through solid yield in torrefaction process