Abstract:Rolling element bearing faults are among the main causes of breakdown in rotating machines. In this paper, a rolling bearing fault model is proposed based on the dynamic load analysis of a rotor-bearing system. The rotor impact factor is taken into consideration in the rolling bearing fault signal model. The defect load on the surface of the bearing is divided into two parts, the alternate load and the determinate load. The vibration response of the proposed fault signal model is investigated and the fault signal calculating equation is derived through dynamic and kinematic analysis. Outer race and inner race fault simulations are realized in the paper. The simulation process includes consideration of several parameters, such as the gravity of the rotor-bearing system, the imbalance of the rotor, and the location of the defect on the surface. The simulation results show that different amplitude contributions of the alternate load and determinate load will cause different envelope spectrum expressions. The rotating frequency sidebands will occur in the envelope spectrum in addition to the fault characteristic frequency. This appearance of sidebands will increase the difficulty of fault recognition in intelligent fault diagnosis. The experiments given in the paper have successfully verified the proposed signal model simulation results. The test rig design of the rotor bearing system simulated several operating conditions: (1) rotor bearing only; (2) rotor bearing with loader added; (3) rotor bearing with loader and rotor disk; and (4) bearing fault simulation without rotor influence. The results of the experiments have verified that the proposed rolling bearing signal model is important to the rolling bearing fault diagnosis of rotor-bearing systems.

Simulation and Experimental Analysis of Rotor-Bearing System with Rolling Element Bearing Fault in Axial Piston Pump under Churning Condition

Vibration and Stability Analyses of Rotor–bearing-Casing System in an Axial Piston Pump Subjected to Bearing Faults

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

Numerical and Experimental Analysis of Rotor-Bearing System for Axial Piston Pump with Misalignment–rubbing Coupling Fault

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Simulation and Experimental Analysis of Rolling Element Bearing Fault in Rotor-Bearing-casing System

Modeling and Analysis of the Churning Losses Characteristics of Swash Plate Axial Piston Pump

A Theoretical Dynamic Model to Study the Vibration Response Characteristics of an Axial Piston Pump

Dynamic Analysis of an Unbalanced Rotor-Water Pump-Bearing System Considering Varying Compliance Effect and Localized Defects on Bearing Races

Simulation and feature extraction of inter-shaft bearing fault in rotor-bearing-casing system

Vibration Model of Rolling Element Bearings in a Rotor-Bearing System for Fault Diagnosis

Modeling and Analysis of the Tilt Behavior of the Cylinder Block in a High-Speed Axial Piston Pump

Experimental Study on the Influence of the Rotating Cylinder Block and Pistons on Churning Losses in Axial Piston Pumps

Vibration Response Analysis of Rubbing Faults on a Dual-Rotor Bearing System

Modeling and simulation analysis of dual-rotor vibration system with multiple faults

Dynamic Modeling and Vibration Analysis for Inter-shaft Bearing Fault

Modeling and Nonlinear Dynamic Characteristics Analysis of Fault Bearing Time-Varying Stiffness-Flexible Rotor Coupling System

Dynamic modeling and vibration analysis for the gear-rotor-bearing system with localized failures

A time-varying comprehensive dynamic model for the rotor system with multiple bearing faults

Experimental Verification and Nonlinear Dynamic Response Analysis of a Rolling Element Bearing with Localized Defects

Dynamic Modeling and Simulation of Inter-Shaft Bearings with Localized Defects Excited by Time-Varying Displacement