Abstract:The management of global carbon dioxide (CO2) emissions is considered one of the main environmental problems facing the modern world. One of the potential techniques for CO2 capture is absorption, using membrane contactor modules. Most of the previous research that dealt with membrane contactor simulations considered the whole membrane surface as the active reaction surface. However, in this paper, a more realistic model of the membrane-contactor module is presented, taking into account the effects of the pore size and surface porosity. CO2 absorption into the monoethanolamine (MEA) solution in hollow fiber membrane-contactor modules was numerically investigated. A computational fluid dynamics simulation was established using essential basic fluid dynamics and mass transfer equations in reactive mode. An algorithmic function was used to present the relations between the CO2 absorption flux and the hollow fiber length, membrane surface pore size, and porosity. The simulation results were compared to previously obtained experimental results without using any fitting parameters, and a good agreement was found with an average error of 8.5%. The validated simulation was then used to predict the effects of the MEA inlet velocity and concentration, the membrane surface pore size, and porosity on the total CO2 absorption flux. A maximum absorption flux of about 1.8 mol/m2. s was achieved at an MEA concentration of 4 M with a pore size of 0.2 microns, a surface porosity of 1%, and an inlet velocity of 0.25 m/s. The extrapolation technique was then used to predict the values of the absorption flux at longer fiber lengths. The concentration profiles around the pores at the gas–liquid contact surface of the membrane were obtained and presented. The proposed model exhibited excellent potential to evaluate the effective reaction surface in hollow fiber membrane contactors. This model could be considered the first step to obtaining accurate predictions of the membrane contactor gas absorption performance based on its surface structure.

Study on Robust Absorption Performance of Hydrophilic Membrane Contactor for Direct Air Capture

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Hollow Fiber Contained Hydrogel-Ca Membrane Contactor for Carbon Dioxide Removal from the Enclosed Spaces

Understanding the performance of membrane for direct air capture of CO2

On co 2 absroprtion using absorbent in hollow fiber membrane contactor

CO2 capture using superhydrophobic ceramic membrane: Preparation and performance analysis

Numerical Study on Absorption of Carbon Dioxide and Mass Transfer Performance in Hollow Fiber Membrane Contactor

Simulation Assessment of Inlet Parameters and Membrane-Surface-Structure Effects on CO2 Absorption Flux in Membrane Contactors

Superhydrophobic Ceramic Membrane Coupled with a Biphasic Solvent for Efficient CO2 Capture

Investigation of CO2 Absorption in Methyldiethanolamine and 2-(1-piperazinyl)-ethylamine Using Hollow Fiber Membrane Contactors: Part C. Effect of Operating Variables

Study on design strategies and on new structure-performance relationships for CO 2 capture in gas-liquid hollow fiber membrane contactors

CO2 Capture using a Superhydrophobic Ceramic Membrane Contactor

Development of a membrane dispersion micro-absorber for CO 2 capture

Experimental study of hollow fiber membrane contactor process using aqueous amino acid salt-based absorbents for efficient CO 2 capture

Theoretical investigations on the effect of absorbent type on carbon dioxide capture in hollow-fiber membrane contactors

ScienceDirect The 7 th International Conference on Applied Energy – ICAE 2015 CO 2 capture using a superhydrophobic ceramic membrane contactor

Modeling and Experimental Study of Carbon Dioxide Absorption in a Flat Sheet Membrane Contactor

Microporous polypropylene hollow fiber membranes contactor for the separation and fixation of carbon dioxide from simulative flue gas

Performance evaluation and optimization of hollow fiber membrane contactors for carbon dioxide absorption: A comparative study of ammonia, ethanolamine, and diethanolamine solvents