Abstract:Abstract: The most prevalent and widely used building material in the world is reinforced concrete. The primary building material for the majority of constructions, including buildings, bridges, etc., is reinforced concrete. Because of various factors, some of these buildings or portions of them are failing to perform as designed. The best solution to increase the load carrying capacity and extend the useful life of these inadequate structures is to strengthen them because replacing them would need significant investments and not be an appealing alternative. Even though the effectiveness of other techniques is widely accepted,a new effective and promising technique of strengthening civil engineering structures externally is gaining popularity, where fibre-reinforced polymer (FRP) is used. One of the most popular strengthening methods recently is the use of carbon fibre reinforced polymer (CFRP) to strengthen reinforced concrete beams. It provides a desirable way to improve the shear and flexural strengths of RC beams. The manner in which these composites are bonded to the beam has a significant impact on the behaviour of reinforced concrete beams in shear and flexure. The purpose of this study was to present a three-dimensional nonlinear finite element analysis (FEA) of a reinforced concrete beam (RC beam) reinforced by prestressed carbon fibre plate (CFRP plate). While there are many commercial programmes available for three-dimensional nonlinear FEA, each one has a unique ability to represent complex behaviour of composite materials, such as RC beams strengthened with prestressed CFRP plate and the contact interaction. Because of its reputation for accuracy in simulating the behaviour of a range of materials, including concrete, and its potent contact algorithms, the ABAQUS finite element programme was chosen for this work. Steel reinforcements were modelled as elastic- perfectly plastic materials, while concrete was studied using the concrete damage plasticity (CDP) constitutive model. The CFRP plate was modelled as an entirely elastic substance that breaks under the highest tensile strain. Concrete and steel reinforcement were considered to have a perfect connection, and the behaviour of concrete and CFRP plate was represented using a contact model. The FEA's findings were verified against experiment findings that were published in the literature. In terms of load-deflection behaviour, crack patterns, and mode of failure, the results were compared. The proposed FEA model was able to accurately simulate the behaviour of RC beams strengthened with prestressed CFRP plate based on the validation. To find out the impact of the thickness, width, and length of the CFRP plate, as well as the prestressing levels and steel grades, a parametric research was done. In particular, the strength of the RC beam for the ultimate load was shown to be increased by increasing prestressing of the CFRP plate. However, as prestressing increased, the fracture of the CFRP plate altered the mechanism of failure, preventing the ultimate load from increasing further. The use of higher grade steel improved the ability to support additional weight. Although the general load carrying capability of the CFRP plate was increased by lengthening the plate, it was discovered that strengthening RC beams by 25% of their shear span was sufficient and cost- effective. The load-deflection curve, failure modes, and crack patterns from the experiments are fairly reflected in the FE model.

Parametric Analysis on the Flexural Behaviour of RC Beams Strengthened with Prestressed FRP Laminates

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Experimental Study on the Flexural Behavior of RC Beams Strengthened with Prestressed BFRP Laminates

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Predicting deflection of retrofitted reinforced concrete beams

RESEARCH ON FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED WITH BASALT FIBER REINFORCED POLYMER

Experimental Study of Flexural Behavior of RC Beams Strengthening with BFRP Sheets

Flexural performance of RC beams strengthened with prestressed FRP sheets: Experiments and numerical investigations

Experimental Study and Numerical Modelling on Flexural and Shear Strengthening of RC Beam with Prestressed FRP Bars

Experimental Study of Flexural Fatigue Performance of Reinforced Concrete Beams Strengthened with Prestressed CFRP Plates

Flexural Behavior of RC Beams Strengthened with Prestressed and Non-Prestressed BFRP Grids

Numerical study of steel–concrete composite beams strengthened by CFRP plates with prestressed unbonded reinforcement system

Experimental Studies of Concrete Beams Strengthened with Prestressed Cfrp Laminates

Improving Strengthening Effect of Externally Bonded Prestressed CFRP Sheets on Existing RC Beams

A review on flexural behavior of reinforced concrete beams strengthened with prestressed carbon fiber reinforced polymer plates

Flexural response predictions of reinforced concrete beams strengthened with prestressed CFRP plates

Experimental Study of Flexural Behaviour of RC Beams Strengthened by Longitudinal and U-shaped Basalt FRP Sheet

Analysis of Debonding Load-Carrying Capacity for RC Beams Strengthened with Prestressed FPR Under Bending Load

Experimental and Numerical Parametric Study on Flexural Behavior of Concrete Beams Reinforced with Hybrid Combinations of Steel and BFRP Bars

Experimental study on flexural behavior of RC beams strengthened with FRP/SMA composites