Abstract:High-pressure direct injection diesel/methanol dual-fuel engines exhibit excellent emission reduction potential, but they are still in the initial stage of research and development. The influences of different methanol injection locations, injection duration, and injection pressures on combustion characteristics, mixture homogeneity, and exhaust emissions are investigated to explore appropriate injection strategies and further optimize the engine performance base using CONVERGE software. The results show that the impact of the methanol injection position on the engine is relatively small, especially on combustion characteristics. A larger axial nozzle distance contributes to the formation of the homogeneous mixture, improving the engine economy. However, the engine performance is remarkably affected by methanol injection duration and methanol injection pressure. A shorter combustion duration is achieved with a decrease in the methanol injection duration and an increase in the methanol injection pressure, as a result of which the fuel economy is improved, with the combustion process more concentrated near the top dead center. Simultaneously, the mixture homogeneity is enhanced, which is conducive to a reduction in soot and CO emissions, yet not to a NOX and HC reduction. The lowest overall emissions of NOX, soot, CO, and HC are achieved when the radial nozzle distance and axial nozzle distance are 2.5 mm and 0.5 mm, respectively. Besides, the combustion characteristics and emissions of the engine are affected significantly under different methanol injection locations and injection pressures. The increased injection interval leads to deteriorating combustion characteristics and economy, i.e., a delayed combustion phase (CA50), an extended ignition delay and combustion duration (CA10–CA90), thereby increasing CO and soot emissions, but decreasing NOX emission. Additionally, the optimal economy and exhaust emissions are obtained when adopting an injection duration of 6 °CA and an injection pressure of 44.4 MPa. The ITE is increased in this case compared to the other injection strategies, thereby improving the engine performance significantly. The results provide parametric feedback and theoretical support for the design of high-pressure direct injection diesel/methanol dual-fuel engines from a time and space perspective, which has certain theoretical significance.

Investigation into the Operating Range of a Dual-Direct Injection Engine Fueled with Methanol and Diesel

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

A comparative study on operating range and combustion characteristics of methanol/diesel dual direct injection engine with different methanol injection timings

Numerical Investigation on the Influence of Injection Location and Injection Strategy on a High-Pressure Direct Injection Diesel/Methanol Dual-Fuel Engine

Optimization of methanol/diesel dual-fuel engines at low load condition for heavy-duty vehicles to operated at high substitution ratio by using single-hole injector for direct injection of methanol

In-depth Comparison of Methanol Port and Direct Injection Strategies in a Methanol/diesel Dual Fuel Engine

Effect of injection strategy on a diesel/methanol dual-fuel direct-injection engine

Experimental Investigation on Combustion Characteristics in Dual-Fuel Dual-Injection Engine

Investigation of Split Diesel Injections in Methanol/Diesel Dual-Fuel Combustion in an Optical Engine

Investigation of Injection Strategy for a Diesel Engine with Directly Injected Methanol and Pilot Diesel at Medium Load

Experimental Investigation of the Effects of Diesel Injection Strategy on Gasoline/diesel Dual-Fuel Combustion

Performance and Emissions of A Diesel Engine Fuelled with Methanol

Effects of Diesel Injection Timing and Methanol Substitution Ratio on Combustion and Exhaust Emission Characteristics of a Dual Fuel Compression Ignition Engine

Effects of Diesel Pilot-Injection Strategy on a Methanol/diesel Dual-Direct Injection Engine

Experimental Investigation on the Effects of Direct Injection Timing on the Combustion, Performance and Emission Characteristics of Methanol/Gasoline Dual-Fuel Spark Turbocharged Ignition (DFSI) Engine with Different Injection Pressures under High Load

Experimental Study on the Effect of Injection Strategies on the Combustion and Emissions Characteristic of Gasoline/methanol Dual-Fuel Turbocharged Engine under High Load

Combustion and Emission Characteristics of a DI Engine Operating on High Proportion of Methanol-Diesel Dual Fuel

Parametric Study on Effects of Methanol Injection Timing and Methanol Substitution Percentage on Combustion and Emissions of Methanol/diesel Dual-Fuel Direct Injection Engine at Full Load

Experimental investigations of the effects of pilot injection on combustion and gaseous emission characteristics of diesel/methanol dual fuel engine

A full-parameter computational optimization of both injection parameters and injector layouts for a methanol/diesel dual-fuel direct injection compression ignition engine

Multiple-objective Optimization of Methanol/diesel Dual-Fuel Engine at Low Loads: A Comparison of Reactivity Controlled Compression Ignition (RCCI) and Direct Dual Fuel Stratification (DDFS) Strategies