Abstract:Dynamic recrystallization (DRX) plays great roles in the microstructure refinement and property improvement during hot working of titanium alloys. Various deformation modes in hot working may greatly affect the DRX mechanism and kinetics, but which has not attracted enough attention. In this work, the DRX mechanism and kinetics of titanium alloy in hot compression deformation (CD) and shear deformation (SD) were comparatively investigated by combining the electron backscatter diffraction technique and crystal plastic finite element models. The results show that discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX) coexist in both of CD and SD, while their dominant mechanism and kinetics of DRX are quite different. These differences are found to be strongly dependent on the slip behavior and resulting misorientation development in each deformation mode. In CD, the smaller contribution ratios of basal and pyram as well as the gradual formation of {0002} basal texture suppress the lattice rotation and reduce the long-range misorientation gradient (MOG). As a result, the dominant DRX mechanism changes from CDRX to DDRX with strain in CD. However, SD presents much higher contribution ratios of basal and pyram compared with CD, and the c-axes of most grains are perpendicular to the direction of shear stress. These greatly improve the lattice rotation and long-range MOG, which makes CDRX always prevail and present larger driving force in SD. Moreover, higher contribution ratio of pyram slip in SD also improves the kernel average misorientation, and thus provides larger driving force for DDRX in SD than in CD. These factors make SD present faster DRX kinetics and thus raising the DRX fraction by 10% and grain size homogeneity by 32% compared with CD. These results suggest that the deformation condition and mode should be well designed for obtaining more refined and homogeneous microstructure in the hot working of titanium alloy components.

Study on the microstructure evolution and dynamic recrystallization mechanism of selective laser melted Inconel 718 alloy during hot deformation

Hot Deformation and Microstructure Evolution of Selective Laser Melted 718 Alloy Pre-Precipitated with Δ Phase

Study of Pre-Precipitated Δ Phase Promoting Deformation Twinning and Recrystallization Behavior of Inconel 718 Superalloy During Hot Compression

Microstructure Evolution During Dynamic Recrystallization of Hot Deformed Superalloy 718

Deformation Mode Dependent Mechanism and Kinetics of Dynamic Recrystallization in Hot Working of Titanium Alloy

Microstructure Evolution and Dynamic Recrystallization Behavior of SLM GH3536 Superalloy During Hot Deformation

Modeling and Simulation of Dynamic Recrystallization for Inconel 718 in the Presence of Δ Phase Particles Using a Developed Cellular Automaton Model

Investigation on dynamic recrystallization behavior in hot deformed superalloy Inconel 718

Microstructure Evolution and Underlying Mechanisms During the Hot Deformation of 718plus Superalloy

Hot deformation behavior and dynamic recrystallization mechanisms of GH4975 alloy prepared by electron beam smelting layered solidification

Electron Backscatter Diffraction Study and Unified Constitutive Model of Dynamic Recrystallization Behavior of As-forged ERNiCrMo-3 Alloy

Microstructure evolution and dynamic recrystallization behavior of a powder metallurgy Ti-22Al-25Nb alloy during hot compression

Evolution of Solidification Microstructure and Dynamic Recrystallisation of Inconel 625 During Laser Solid Forming Process

Characteristic and Mechanism of Dynamic Recrystallization in a Newly Developed Fe-Cr-Ni-Al-Nb Superalloy During Hot Deformation

Anisotropy of Flow Behavior and Microstructure Evolution of Selective Laser Melted 718 Alloy During High Temperature Deformation

Microstructural Evolution and an Improved Dynamic Recrystallization Kinetic Model of a Ni-Cr-Mo Alloy in Hot Deformation

Microstructure Evolutions and Nucleation Mechanisms of Dynamic Recrystallization of A Powder Metallurgy Ni-Based Superalloy During Hot Compression

Research on microplastic deformation of Inconel718 under the conditions of high temperature and high strain rate

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Microstructure evolution and dynamic recrystallization mechanism during thermal deformation of GH4698 superalloy

Microstructure Evolution and Dynamic Softening Mechanisms During High-Temperature Deformation of a Precipitate Hardening Ni-based Superalloy