Abstract:The utilization of recycled concrete and glass aggregates in concrete production has emerged as a highly promising method to significantly increase the recycling rate of waste materials. However, the interaction between alkaline environment and silica present in concrete detrimentally impacts mechanical properties and durability of the concrete due to the significant silica content of the aggregates. This study aims to develop a high‐performance and sustainable concrete to resist alkali–silica reaction (ASR). The study focuses on the use of a blend of ground granulated blast furnace slag (GGBS) and fly ash (FA) as binder materials to mitigate negative effects of the ASR on the mechanical properties and and durability of concrete made with crushed glass sand and coarse recycled concrete aggregate (RCA). Various tests, including ASR expansion, flow, slump, density, compression, three‐point bending, water absorption, and chloride attack, were conducted. Furthermore, microanalysis using scanning electron microscopy and energy‐dispersive x‐ray spectroscopy was performed. Based on the results, it is found that the GGBS is less effective than the FA in reducing the ASR expansion of the concrete, with only 3%, 9%, and 12% decreased expansion as a result of the addition of 20%, 40%, and 70% GGBS to the concrete containing 30% FA, respectively. It is also shown that combining 20% GGBS with 30% FA in the RCA concrete containing glass sand develops similar compressive and flexural strengths and water absorption compared to that containing natural sand. This can be related to the pozzolanic reaction of the FA and GGBS, which helps to retain the alkalis for reducing the crack development and propagation in the concrete. However, further GGBS content leads to a decrease in the strengths and an increase in the water absorption of the concrete. The results of this study point to the significant potential of combining FA and GGBS at an optimum ratio to mitigate the ASR effect on RCA concretes containing crushed glass sand. This approach helps in minimizing the emission of greenhouse gases and other pollutants generated during cement production, thereby mitigating environmental pollution. Additionally, it helps the preservation of natural resources by reducing the depletion of natural sand and coarse aggregate.

Roles of Recycled Fine Aggregate and Carbonated Recycled Fine Aggregate in Alkali-Activated Slag and Glass Powder Mortar

Rheology and alkali-silica reaction of alkali-activated slag mortars modified by fly ash microsphere: a comparative analysis to OPC mortars

Effects of pretreated recycled fine aggregates on the mechanical properties and microstructure of alkali-activated mortar

Effect of microfibers or SRA on the shrinkage and mechanical properties of alkali activated slag/fly ash-based mortars incorporating recycled fine aggregate

Alkali-Silica Reaction and Residual Mechanical Properties of High-Strength Mortar Containing Waste Glass Fine Aggregate and Supplementary Cementitious Materials

Mitigating Autogenous Shrinkage of Alkali-Activated Slag Mortar by Using Porous Fine Aggregates as Internal Curing Agents

Admixture Effects on the Rheological/Mechanical Behavior and Micro-Structure Evolution of Alkali-Activated Slag Backfills

Microstructure, strength development mechanism, and CO2 emission analyses of alkali-activated fly ash-slag mortars

Factors Affecting Kinetics and Gel Composition of Alkali–Silica Reaction in Alkali-Activated Slag Mortars

Microstructures and properties of alkali-activated slags with composite activator: Effects of Na2O equivalents

Effect of Recycled Fine Aggregates on the Mechanical and Drying Shrinkage Properties of Alkali-Activated Recycled Concrete

Utilization of recycled concrete fines and powders to produce alkali-activated slag concrete blocks

Concrete containing recycled concrete coarse aggregate and crushed glass sand: Mitigating the effect of alkali–silica reaction

Effect of CaO on the shrinkage and microstructure of alkali-activated slag/fly ash microsphere

Experimental Study on the Application of Recycled Concrete Waste Powder in Alkali-Activated Foamed Concrete

Effect of Steel Slag on the Properties of Alkali-Activated Slag Material: A Comparative Study with Fly Ash

Structure, morphology and compressive strength of Alkali-activated mortars containing waste bottle glass nanoparticles

Effect of borax-modified activator on mechanical properties and drying shrinkage of alkali-activated slag/metakaolin mortar

ALKALI SILICA REACTION OF RECYCLED GLASS AGGREGATE MORTAR USING FLY ASH UNDER STEAM CURING

Effect of Activator and Mineral Admixtures on the Autogenous Shrinkage of Alkali-Activated Slag/Fly Ash

Synergetic effect of a chemical activator and blast-furnace slag on enhancing recycled aggregate mortar