Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Internal-Short-Circuit Probability Evaluation of Lithium-Ion Battery Based on Active Protection

Risk evaluation of internal short circuit for lithium‐ion battery based on an active protection method

Internal Short Circuit Evaluation and Corresponding Failure Mode Analysis for Lithium-Ion Batteries

Electrical and thermal interplay in lithium‐ion battery internal short circuit and safety protection

A review of the internal short circuit mechanism in lithium‐ion batteries: Inducement, detection and prevention

Mechanism, modeling, detection, and prevention of the internal short circuit in lithium-ion batteries: Recent advances and perspectives

A Study on the Behaviors of Internal Short Circuit in Lithium-Ion Batteries

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Detection of internal short circuit in lithium-ion batteries based on electrothermal coupling model

Multi-layer Internal Short-Circuit Mechanism and Thermal Runaway Risk Assessment of Lithium-Ion Batteries Using Nail Penetration Simulation

Online internal short circuit detection for a large format lithium ion battery

Accurate Measurement of the Contact Resistance During Internal Short Circuit in Lithium-Ion Batteries

Revealing the internal short circuit mechanisms in lithium-ion batteries upon dynamic loading based on multiphysics simulation

Online detection of early stage internal short circuits in series-connected lithium-ion battery packs based on state-of-charge correlation

Internal Short Circuit of Lithium Metal Batteries under Mechanical Abuse

Internal Short Circuit Fault Diagnosis for Lithium-ion Battery Using a Novel Voltage Prediction Method

Study of lithium-ion battery module external short circuit risk and protection design

An Online Adaptive Internal Short Circuit Detection Method of Lithium-Ion Battery

Prediction of Internal Circuit and Mechanical-Electrical-Thermal Response of Lithium-Ion Battery Cell with Mechanical-Thermal Coupled Analysis

Safety risk assessment method for thermal abuse of lithium-ion battery pack based on multiphysics simulation and improved bisection method

Parametric Study on the Safety Behavior of Mechanically Induced Short Circuit for Lithium-Ion Pouch Batteries