Abstract:In this paper, a state feedback controller is designed via polynomial method for a double inverted pendulum. The polynomial method is first extended into state space. Then based on the equations of motion, the linearized state space model of double inverted pendulum is derived near the upright balance position. The state feedback controller is designed via polynomial method where Ackermann's formula is used to determined the gain matrix. The polynomial-method-based controller design is validated through real experiments. It is shown that the existence of closed-loop zeros in the overall control system imposes limit on the selection of the time constant in polynomial method. In the end, the performance of the controller design is compared with the well-known linear quadratic regulator control. The two controllers share an identical state feedback control configuration, but their design procedures are different. It is found that the two different control methods have a similar performance. However compared with the trial-and-error-based linear quadratic regulator optimal control, polynomial method is much more straightforward in terms of its design procedure due to clear physical meanings of its control parameters.

Modelling and Controller Design for a Five-Link Inverted Pendulum

Robust control based on sliding mode for a triple inverted pendulum

Stabilize the planar single inverted pendulum based on LQR.

Stabilization of the double inverted pendulum based on discrete-time model predictive control.

The design and realization of a remote control system of an inverted pendulum with flexible joint

LQR Optimal Control and Embedded System Implementation for a Single Inverted Pendulum

Design, Implementation, and Control of a Wheel-Based Inverted Pendulum

Development of inverted pendulum system and fuzzy control based on MATLAB

Finite Time Controller Design for Single Inverted Pendulum System

Modeling and Control of One-stage Inverted Pendulum Body Based on Matlab

Experiment Design on Inverted Pendulum System

Modeling and Simulation of a Flexible Inverted Pendulum System

Logic-Based Switching Nested Saturation Control for Inverted Pendulum

Stabilization of a Double Inverted Pendulum by Analogue Controller

Stability Analysis of LQR-ANFIS Control Schemes on 2-degree-of-freedom Inverted Pendulum Systems

Model identification and real-time implementation of a linear parameter–varying control scheme on lab-based inverted pendulum system

Simulation and Robustness Studies on an Inverted Pendulum

The Design of the Controller of First-order Inverted Pendulum

A Complex Overview of Modeling and Control of the Rotary Single Inverted Pendulum System

Polynomial-method-based SIMO Controller Design for a Double Inverted Pendulum.

The inverted-pendulum model with consideration of pendulum resistance and its LQR controller