Abstract:Objective: The aim of this study is to perform specific hemodynamic simulations of idealized abdominal aortic aneurysm (AAA) models with different diameters, curvatures and eccentricities and evaluate the risk of thrombosis and aneurysm rupture. Methods: Nine idealized AAA models with different diameters (3 cm or 5 cm), curvatures (0° or 30°) and eccentricities (centered on or tangent to the aorta), as well as a normal model, were constructed using commercial software (Solidworks; Dassault Systemes S.A, Suresnes, France). Hemodynamic simulations were conducted with the same time-varying volumetric flow rate extracted from the literature and 3-element Windkessel model (3 EWM) boundary conditions were applied at the aortic outlet. Several hemodynamic parameters such as time-averaged wall shear stress (TAWSS), oscillatory shear index (OSI), relative residence time (RRT), endothelial cell activation potential (ECAP) and energy loss (EL) were obtained to evaluate the risk of thrombosis and aneurysm rupture under different conditions. Results: Simulation results showed that the proportion of low TAWSS region and high OSI region increases with the rising of aneurysm diameter, whereas decreases in the curvature and eccentric models of the corresponding diameters, with the 5 cm normal model having the largest low TAWSS region (68.5%) and high OSI region (40%). Similar to the results of TAWSS and OSI, the high ECAP and high RRT areas were largest in the 5 cm normal model, with the highest wall-averaged value (RRT: 5.18 s, ECAP: 4.36 Pa −1 ). Differently, the increase of aneurysm diameter, curvature, and eccentricity all lead to the increase of mean flow EL and turbulent EL, such that the highest mean flow EL (0.82 W · 10 −3 ) and turbulent EL (1.72 W · 10 −3 ) were observed in the eccentric 5 cm model with the bending angle of 30°. Conclusion: Collectively, increases in aneurysm diameter, curvature, and eccentricity all raise mean flow EL and turbulent flow EL, which may aggravate the damage and disturbance of flow in aneurysm. In addition, it can be inferred by conventional parameters (TAWSS, OSI, RRT and ECAP) that the increase of aneurysm diameter may raise the risk of thrombosis, whereas the curvature and eccentricity appeared to have a protective effect against thrombosis.

Finite Element Analysis for the Effects of the Descending Aorta Tortuosity on Aortic Hemodynamics

Investigation of pulsatile flowfield in healthy thoracic aorta models

Computation of hemodynamics in tortuous left coronary artery: a morphological parametric study.

Impact of coronary tortuosity on the coronary blood flow: A 3D computational study

A computational study on the influence of aortic valve disease on hemodynamics in dilated aorta

Application of 3D curvature and torsion in evaluating aortic tortuosity

A hemodynamic analysis of energy loss in abdominal aortic aneurysm using three-dimension idealized model

Computational analysis to assess hemodynamic forces in descending thoracic aortic aneurysms

Numerical Simulation of Blood Flow in Aortoiliac Bifurcation with Increasing Degree of Stenosis

Numerical analysis of the hemodynamics of rat aorta based on magnetic resonance imaging and fluid–structure interaction

Haemodynamic Analysis of the Relationship Between the Morphological Alterations of the Ascending Aorta and the Type A Aortic-Dissection Disease

Effect of geometry configuration of abdominal aortic aneurysm on hemodynamics by 3D numerical analysis

Numerical simulation of two-phase non-Newtonian blood flow with fluid-structure interaction in aortic dissection

Numerical study on the effect of steady axial flow development in the human aorta on local shear stresses in abdominal aortic branches

The influence of blood velocity and vessel geometric parameters on wall shear stress

[Hemodynamics simulation and analysis of left coronary artery aneurysms with concomitant stenosis]

Three-dimensional Simulation of Pulsatile Blood Flow in Human Thoracic Aorta

EFFECT OF PROGRESSIVE DEGREES OF SIDE-BRANCH BIFURCATION ANGLES ON FLOW IN ARTERY USING NUMERICAL SIMULATION

Computational Simulation of Aortic Aneurysm Using FSI Method: Influence of Blood Viscosity on Aneurismal Dynamic Behaviors

Tortuosity of the Superficial Femoral Artery and Its Influence on Blood Flow Patterns and Risk of Atherosclerosis

Hemodynamics Study on S-shaped Arteries