Abstract:The passion fruit peel was subjected to a drying and pulverising process, after which the resulting powder was extracted using an ultrasonic‐assisted ethanol method. The extract was then freeze‐dried, resulting in the production of passion fruit peel extract (PFPE). PFPE was combined with dopamine (DA) to obtain PFPE/PDA solution, which was blended with hydroxypropylmethylcellulose (HPMC) for the preparation and characterisation of the film. The film with the best overall performance was selected for freshness preservation experiments on bananas. The objective of this study was to evaluate the feasibility of blending passion fruit peel extract (PFPE) with polydopamine (PDA) solution and hydroxypropylmethylcellulose (HPMC) to prepare the properties of PFPE/PDA/HPMC composite films for their application in fruit and vegetable packaging. PFPE was extracted by ultrasonic‐assisted extraction method, which is simple, easy to operate and has high extraction efficiency, PFPE and dopamine were subjected to PFPE/PDA solution preparation, which in turn led to the preparation of HPMC, PFPE/PDA/HPMC films at different concentrations (0%, 5%, 10%, 15% and 20%), and 10% PDA/HPMC and PFPE/HPMC films were prepared with PDA and PFPE solutions, respectively. The interactions between the components in the films were analysed by infrared spectroscopy and X‐ray diffractometer, and the colour, mechanical properties, barrier properties and antioxidant activity of the films were determined. The results showed that the addition of PFPE/PDA solution had a positive effect on the performance of the films. The tensile strength of the composite films was 8.21 MPa, the elongation at break was 85.02% and the water vapour transmission was 2.62 × 10−14 g·mm/(cm2·h·Pa) when the content of PFPE/PDA was 20% compared to that of HPMC films; the DPPH radical scavenging rate and hydroxyl radical scavenging rate of the films increased with the increase of PFPE/PDA concentration, and the DPPH radical scavenging rate of the film with 20% additive was 28.71% and the hydroxyl radical scavenging rate was 34.77%, which were much higher than that of the HPMC film. The simulated bananas were stored at room temperature together with the films and stored at 25°C and tested every day, and it was found that the bananas without packaging film began to show browning on the third day, while the film with 20% additive still did not show obvious browning on the fifth day, so the addition of PFPE/PDA could effectively delay the browning of bananas and prolong their shelf life. In summary, this study improves the use value of passion fruit peel waste and provides new effective packaging for fresh bananas, while it can also provide a new way for the development of degradable films from plant extracts.

Properties of Pectin-Based Films from White-Fleshed Pitaya (hylocereus Undatus) Peel Waste As Affected by Montmorillonite

Film Properties of Pectin Obtained from Various Fruits’ (Lemon, Pomelo, Pitaya) Peels

Pectin extracted from red dragon fruit (Hylocereus polyrhizus) peel and its usage in edible film

Valorization of waste prickly pear peels: optimization for pectin extraction, characterization, and development of edible film

Optimizing Edible Film Production from Red Pitaya Peel Powder, Konjac Glucomannan and Kappa Carrageenan

Novel films of pectin extracted from ambarella fruit peel and jackfruit seed slimy sheath: Effect of ionic crosslinking on the properties of pectin film

Characterization and Applications of the Pectin Extracted from the Peel of Passiflora tripartita var. mollissima

Evaluation of Different Pectic Materials Coming from Citrus Residues in the Production of Films

Edible films of pectin extracted from dragon fruit peel: Effects of boiling water treatment on pectin and film properties

Tunning the hydrophobic performance and thermal stability of pectin film by acetic anhydride esterification

Study on Pectin Extraction from Banana Peel and Preparation of Pectin Fresh-keeping Film

Biodegradable gelatin/pectin films containing cellulose nanofibers and biguanide polymers: Characterization and application in sweet cherry packaging

Sustainable papaya plant waste and green tea residue composite films integrated with starch and gelatin for active food packaging applications

Incorporation of Poly(ethylene 2,5-furanoate) into Poly(butylene adipate- co -terephthalate) toward Sustainable Food Packaging Films with Enhanced Strength and Barrier Properties

Study on morphological, mechanical, thermal, barrier, rheological, and biodegradation properties of poly(butylene adipate‐co‐terephthalate)/thermoplastic starch/poly(propylene carbonate)‐g‐polyurethane biodegradable films

Preparation and characterization of self-standing biofilms from compatible pectin/starch blends: Effect of pectin structure

Polyurethane prepolymer-modified high-content starch-PBAT films

Preparation of Passion Fruit Peel Extract/Polydopamine/Hydroxypropylmethylcellulose Film and Its Application in Banana Preservation

Impact of Pomegranate Peel (Punica granatum L.) Extract on Rice Starch-Pectin-Based Films for Maintaining the Organoleptic Properties of Tomatoes

Pectin From Fruit Peel Waste: A Sustainable Source for Production of Active Packaging Films

Biological modification of pentosans in wheat B starch wastewater and preparation of a composite film