Facile and Novel Fabrication of High-Performance Loose Nanofiltration Membranes for Textile Wastewater Recovery
Yanyan Liu,Gilles Van Eygen,Shushan Yuan,Hongbing Wang,Mingshuo Chi,Daliang Xu,Qieyuan Gao,Guichuan Li,Junfeng Zheng,Bart Van der Bruggen
DOI: https://doi.org/10.1016/j.seppur.2022.122867
IF: 8.6
2023-01-01
Separation and Purification Technology
Abstract:Loose nanofiltration (LNF) membranes can be used to treat textile wastewater if the membranes meet stringent criteria on permeability, selectivity, and structural stability. In this work, a novel LNF membrane was developed by interfacial polymerization (IP) process between 1,3,5-tris(4-aminophenyl) benzene (TAPB) and trimesoyl chloride (TMC). The structure of TAPB, which is a symmetric and non-planar triamine monomer with four benzene rings, is beneficial for the formation of a rigid active layer with a uniform pore size and high porosity. This novel LNF membrane was fabricated in two steps. First, TAPB was blended with polyether sulfone (PES) to prepare a substrate via the phase inversion process. Second, TMC was cross-linked with the TAPB-embedded PES substrate via the IP reaction. The microstructure, surface properties, and dye/salt separation performance of the novel LNF membranes were systematically investigated in this study. The optimized membrane showed outstanding water permeance (185.8 L m-2 h-1 bar-1), low salt rejections (22.4 % for Na2SO4 and 12.4 % for NaCl), and excellent rejection for various dyes (99.8 % for Congo Red, 99.1 % for Direct Red 23, 98.1 % for Reactive Black 5 and 88.8 % for Reactive Orange 16). Moreover, the resultant membrane showed excellent stability and antifouling properties during a long-term filtration test of 72 h using aqueous dye/salt mixtures. This study provides a facile and novel IP strategy to fabricate high-performance LNF membranes by using water -insoluble amine monomers, which have a high potential for dye/salt separation applications.