Abstract:TiO2 photoanodes have gained significant attention for the removal of organic pollutants through photoelectrocatalytic processes, with the aim of developing a cost-effective and efficient method for improving the degradation of pollutants in surface water. This study investigated the effects of adding titanium nanooxide (Degussa P25) containing 70% anatase and 30% rutile phases on the properties of nanostructured TiO2 photoanodes prepared on glass substrates (indium tin oxide (ITO)) using sol–gel/dip coating techniques The results obtained from ultraviolet–visible transmittance spectroscopy, electrochemical (EC) impedance spectroscopy, photocurrent, and atomic force microscopy analyses revealed that the addition of Degussa P25 improved the electrical conductivity of the TiO2/ITO anode and reduced the optical bandgap from 3.50 to 3.35 eV, while the size of the titanium oxide particles decreased to about 75 nm. The EC impedance spectra measurement confirms that the addition of titanium nanooxide Degussa P25 improved the electrical conductivity for TiO2/ITO anode. The photoelectrocatalysis (PEC) performance of the TiO2 photoanodes was investigated via the degradation of methylene blue (MB) under UVA light irradiation. The AB photoanode (with the addition of Degussa P25) exhibited excellent PEC performance, with 95.9% color removal efficiency and 63% total organic carbon (TOC) removal efficiency, compared to 92% color removal efficiency and 56% TOC removal efficiency for the A photoanode (without the addition of Degussa P25). The kinetic constants (k) were 134 × 10−4, 110 × 10−4 (min−1) for A and AB anodes, respectively, and the degradation of MB followed first-order kinetics for all anodes. The A and AB anodes were compared as electrodes for the degradation of MB using PEC, photocatalysis (PC), and EC technologies. Subsequently, The A and AB anodes were utilized as electrodes to compare the performance of PEC, PC, and EC technologies for the degradation of MB. The results showed that the AB anode exhibited higher efficiency in all PC technologies, with color removal (%) efficiencies of 95.9% (PEC), 33% (PC), and 21% (EC) compared to 92% (PEC), 28% (PC), and 19% (EC) for the A anode. Additionally, the photooxidation process had a 2.1% effect on the degradation of the initial MB concentration.

Efficient catalytic degradation of methylene blue by a novel Fe 3+ -TiO 2 @CGS three-dimensional photoelectric system.

Efficient catalytic degradation of methylene blue by a novel Fe3+-TiO2@CGS three-dimensional photoelectric system

Photocatalyst-coated Carbon Microtube Electrodes: Preparation and Characterization of Their Properties and Photocatalytic Degradation of Methylene Blue.

mpg-C3N4/anatase TiO2 with reactive {001} facets composites to enhance the photocatalytic activity of organic dye degradation

Photoelectrocatalytic degradation of methylene blue using F doped TiO2 photoelectrode under visible light irradiation

Carbon/Mn3O4/SrTiO3 Microsphere Photocatalyst for the Efficient Removal of High-Concentration Methylene Blue from Water

Efficient photocatalytic degradation of aqueous organic pollutants by using an advanced TiO2/Ti3C2/montmorillonite composites

Ag2O and NiO Decorated CuFe2O4 with Enhanced Photocatalytic Performance to Improve the Degradation Efficiency of Methylene Blue

Fabrication of Fe<SUB>2</SUB>O<SUB>3</SUB>/TiO<SUB>2</SUB> Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Integrated Nanostructures of TiO2/g-C3N4/Diatomite Based on Low-Grade Diatomite as Efficient Catalyst for Photocatalytic Degradation of Methylene Blue: Performance and Mechanism

Co3O4/CoO ceramic catalyst: Bisulfite assisted catalytic degradation of methylene blue

Efficient photocatalysis of Cu doped TiO2/g-C3N4 for the photodegradation of methylene blue

Multifunctional photocatalyst of graphitic carbon embedded with Fe2O3/Fe3O4 nanocrystals derived from lichen for efficient photodegradation of tetracycline and methyl blue

Enhanced Photoelectric Catalytic Degradation of Methylene Blue Via TiO2 Nanotube Arrays Hybridized with Graphite-Like Carbon

A Novel Octamolybdate‐based Organic–inorganic Hybrid As Photo‐fenton‐like Catalyst for Degradation of Methylene Blue

Multifunctional Photocatalyst of Graphitic Carbon Embedded with Fe 2 O 3 /fe 3 O 4 Nanocrystals Derived from Lichen for Efficient Photodegradation of Tetracycline and Methyl Blue

Fabrication of CNT/TiO2 electrodes and their photoelectrocatalytic properties for methylene blue degradation

Improving the Photo Electro Catalytic Degradation of Methylene Blue by Modified TiO2/ITO Photo Anodes

Three-dimensional monolithic TiO 2 /ZIF-8/AgCl/Ag-based photocatalytic microreactor for efficient degradation of organic pollutants

Photoelectrocatalytic Degradation of Methylene Blue Dye on Titania Nanotube Array Film

photocatalytic degradation of TiO2 via incorporating Ti3C2 MXene for methylene blue removal from water