Abstract:TiO2 photoanodes have gained significant attention for the removal of organic pollutants through photoelectrocatalytic processes, with the aim of developing a cost-effective and efficient method for improving the degradation of pollutants in surface water. This study investigated the effects of adding titanium nanooxide (Degussa P25) containing 70% anatase and 30% rutile phases on the properties of nanostructured TiO2 photoanodes prepared on glass substrates (indium tin oxide (ITO)) using sol–gel/dip coating techniques The results obtained from ultraviolet–visible transmittance spectroscopy, electrochemical (EC) impedance spectroscopy, photocurrent, and atomic force microscopy analyses revealed that the addition of Degussa P25 improved the electrical conductivity of the TiO2/ITO anode and reduced the optical bandgap from 3.50 to 3.35 eV, while the size of the titanium oxide particles decreased to about 75 nm. The EC impedance spectra measurement confirms that the addition of titanium nanooxide Degussa P25 improved the electrical conductivity for TiO2/ITO anode. The photoelectrocatalysis (PEC) performance of the TiO2 photoanodes was investigated via the degradation of methylene blue (MB) under UVA light irradiation. The AB photoanode (with the addition of Degussa P25) exhibited excellent PEC performance, with 95.9% color removal efficiency and 63% total organic carbon (TOC) removal efficiency, compared to 92% color removal efficiency and 56% TOC removal efficiency for the A photoanode (without the addition of Degussa P25). The kinetic constants (k) were 134 × 10−4, 110 × 10−4 (min−1) for A and AB anodes, respectively, and the degradation of MB followed first-order kinetics for all anodes. The A and AB anodes were compared as electrodes for the degradation of MB using PEC, photocatalysis (PC), and EC technologies. Subsequently, The A and AB anodes were utilized as electrodes to compare the performance of PEC, PC, and EC technologies for the degradation of MB. The results showed that the AB anode exhibited higher efficiency in all PC technologies, with color removal (%) efficiencies of 95.9% (PEC), 33% (PC), and 21% (EC) compared to 92% (PEC), 28% (PC), and 19% (EC) for the A anode. Additionally, the photooxidation process had a 2.1% effect on the degradation of the initial MB concentration.

Photoelectrocatalytic Degradation of Methylene Blue Dye on Titania Nanotube Array Film

Enhanced Visible-Light-Induced Photoelectrocatalytic Degradation of Methyl Orange by Cds Sensitized Tio2 Nanotube Arrays Electrode

Enhanced Photoelectrocatalytic Degradation of Methylene Blue on Smooth TiO[sub 2] Nanotube Array and Its Impedance Analysis

[Research of the Photoelectrocatalysis Degradation of Methylene Blue of TiO2 Nanotube Array Films Annealed in Oxygen Atmospheres].

Investigation on the Photoelectrocatalytic Activity of Well-Aligned Tio2 Nanotube Arrays

Photocatalyst-coated Carbon Microtube Electrodes: Preparation and Characterization of Their Properties and Photocatalytic Degradation of Methylene Blue.

Enhanced Photoelectric Catalytic Degradation of Methylene Blue Via TiO2 Nanotube Arrays Hybridized with Graphite-Like Carbon

Photoelectric catalytic degradation of methylene blue by C60-modified TiO2 nanotube array

Photocatalytic degradation of selected dyes by titania thin films with various nanostructures

Fabrication of Fe2O3/TiO2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Fabrication of CNT/TiO2 electrodes and their photoelectrocatalytic properties for methylene blue degradation

Photoelectrocatalytic Degradation of Dyes in Aqueous Solution Using CNT/TiO2Electrode

Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation: Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Fabrication of Fe<SUB>2</SUB>O<SUB>3</SUB>/TiO<SUB>2</SUB> Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Single-crystalline Rutile TiO2 Nanorod Array on Flexible Ti Substrates for Efficient Photoelectrocatalytic Degradation of Phenol in Water

Fabrication of MnO2/TiO2 nano-tube arrays photoelectrode and its enhanced visible light photoelectrocatalytic performance and mechanism

Improving the Photo Electro Catalytic Degradation of Methylene Blue by Modified TiO2/ITO Photo Anodes

Photoelectrocatalytic degradation of methylene blue using F doped TiO2 photoelectrode under visible light irradiation

mpg-C3N4/anatase TiO2 with reactive {001} facets composites to enhance the photocatalytic activity of organic dye degradation

Photoelectrocatalytic Degradation of Organic Contaminants at Bi2O3/TiO2 Nanotube Array Electrode

Photoelectrocatalytic Degradation of Methylene Blue on Electrodeposited Bismuth Ferrite Perovskite Films